Can two MediaTV pro used on the same box?

[rassi]

Can i use two sticks, does it work without a problem?
I´d like to use C and T tuner on my Vu+ DUO

[Sundtek]

Yes, we tested 2x DVB-C and 2x DVB-T with VU+ and OpenPLi

please note that we did not test VTI with 2 Sticks.

[rassi]

Yes, we tested 2x DVB-C and 2x DVB-T with VU+ and OpenPLi

please note that we did not test VTI with 2 Sticks.

I got VIX now in use, still waiting OpenPLi with newer drivers
You haven´t test sticks with C+T?
Is there some tricks to get two stick work?
Or is it just Plug'n'play.

[Sundtek]

I think the startscripts are not prepared for it but we can easily help you to get it work before we update the scripts for it.
DVB-C and DVB-T at the same time via USB are tested and work.

[rassi]

I think the startscripts are not prepared for it but we can easily help you to get it work before we update the scripts for it.
DVB-C and DVB-T at the same time via USB are tested and work.

Can you please give me some help with this?

I got 2 MediaTV pro sticks and i´m now use only one stick with C tuner and now i´d like to install second stick to work as T tuner.

[Sundtek]

you really got 2 tuners now, we'll update the scripts within the next 1-2 days for it.

[rassi]

you really got 2 tuners now, we'll update the scripts within the next 1-2 days for it.

Yes i have. Great, thanks

[Sundtek]

create a file /usr/sundtek/startdvb.sh

#!/bin/bash
if [ "$1" = "0" ]; then
  /opt/bin/mediaclient -D DVBC
  /opt/bin/mediaclient --enabledreambox=/dev/dvb/adapter1/frontend0
fi
if [ "$1" = "1" ]; then
  /opt/bin/mediaclient -D DVBT -d /dev/dvb/adapter2/frontend0
  /opt/bin/mediaclient --enabledreambox=/dev/dvb/adapter2/fronted0
  init 4
  sleep 2
  init 3
fi

on the system run:

cd /usr/sundtek
chmod 777 startdvb.sh

afterwards reboot

[rassi]

I need some more help

Script done and rebooted

Code: [Auswählen]

root@bm750:/usr/sundtek# source startdvb.sh
root@bm750:/usr/sundtek# reboot

No second tuner are visible.

DVBC stick is adapter1 and it is still working.

Code: [Auswählen]

root@bm750:/dev# /opt/bin/mediaclient -D DVBT -d /dev/dvb/adapter2/frontend0
Using device: /dev/dvb/adapter2/frontend0
unable to open device node: /dev/dvb/adapter2/frontend0


Code: [Auswählen]

root@bm750:/dev# cd dvb
root@bm750:/dev/dvb# ls
adapter0
root@bm750:/dev/dvb#

Both sticks is connected, i´ve done "install sundtek develop..." again

DVB Info from control center plugin shows just one stick.

dmesg after second stick

Code: [Auswählen]

usb 1-1: new high speed USB device using brcm-ehci and address 4
usb 1-1: configuration #1 chosen from 1 choice
usbkhelper: dreambox acceleration not detected
usbkhelper: device is attached to a USB 2.0 bus
usbkhelper: using isoc transfer
usbkhelper: registered /dev/ngdvr0
usbkhelper: mknod /dev/ngdvr0 c 254 0
usbkhelper: starting data transfer
usbkhelper: stopping data transfer

[Sundtek]

After connecting the second tuner what does following command show up:

/opt/bin/mediaclient -e

the script requires 2 tuners to be connected

[rassi]

After connecting the second tuner what does following command show up:

/opt/bin/mediaclient -e

the script requires 2 tuners to be connected

Both tuners are detected

Code: [Auswählen]

root@bm750:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [ Sundtek MediaTV Pro]  DVB-C, DVB-T, ANALOG-TV, FM-RADIO, REMOTE-CONT                                               ROL, OSS-AUDIO, RDS
  [DVB-C]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [DVB-T]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [ANALOG-TV]:
     VIDEO0: /dev/video0
     VBI0: /dev/vbi0
  [FM-RADIO]:
     RADIO0: /dev/radio0
     RDS: /dev/rds0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0
  [OSS]:
     OSS0: /dev/dsp0

device 1: [ Sundtek MediaTV Pro]  DVB-C, DVB-T, ANALOG-TV, FM-RADIO, REMOTE-CONT                                               ROL, OSS-AUDIO, RDS
  [DVB-C]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [DVB-T]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [ANALOG-TV]:
     VIDEO0: /dev/video1
     VBI0: /dev/vbi1
  [FM-RADIO]:
     RADIO0: /dev/radio1
     RDS: /dev/rds1
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput1
  [OSS]:
     OSS0: /dev/dsp1

root@bm750:~#


[Sundtek]

Ok, clearly another driver bug which got introduced because of a workaround which we had to add 2 weeks ago for the latest settopbox enigma version... will be fixed shortly
The problem is that the driver allocates the same adapter number for the devices.

[rassi]

Ok, clearly another driver bug which got introduced because of a workaround which we had to add 2 weeks ago for the latest settopbox enigma version... will be fixed shortly
The problem is that the driver allocates the same adapter number for the devices.

Ok, so it wasn´t my dumbness

[Sundtek]

This issue should be solved since 19th January, please update the driver

http://www.sundtek.de/media/sundtek_installer.sh

afterwards the description as pointed out above should work.