Sundtek Support Forum
English => VU+ - VU Duo Settopbox => Thema gestartet von: rassi am Dezember 23, 2010, 02:10:25 Nachmittag
-
Can i use two sticks, does it work without a problem?
I´d like to use C and T tuner on my Vu+ DUO
-
Yes, we tested 2x DVB-C and 2x DVB-T with VU+ and OpenPLi
please note that we did not test VTI with 2 Sticks.
-
Yes, we tested 2x DVB-C and 2x DVB-T with VU+ and OpenPLi
please note that we did not test VTI with 2 Sticks.
I got VIX now in use, still waiting OpenPLi with newer drivers :)
You haven´t test sticks with C+T?
Is there some tricks to get two stick work?
Or is it just Plug'n'play.
-
I think the startscripts are not prepared for it but we can easily help you to get it work before we update the scripts for it.
DVB-C and DVB-T at the same time via USB are tested and work.
-
I think the startscripts are not prepared for it but we can easily help you to get it work before we update the scripts for it.
DVB-C and DVB-T at the same time via USB are tested and work.
Can you please give me some help with this? :)
I got 2 MediaTV pro sticks and i´m now use only one stick with C tuner and now i´d like to install second stick to work as T tuner.
-
you really got 2 tuners now, we'll update the scripts within the next 1-2 days for it.
-
you really got 2 tuners now, we'll update the scripts within the next 1-2 days for it.
Yes i have. Great, thanks :)
-
create a file /usr/sundtek/startdvb.sh
#!/bin/bash
if [ "$1" = "0" ]; then
/opt/bin/mediaclient -D DVBC
/opt/bin/mediaclient --enabledreambox=/dev/dvb/adapter1/frontend0
fi
if [ "$1" = "1" ]; then
/opt/bin/mediaclient -D DVBT -d /dev/dvb/adapter2/frontend0
/opt/bin/mediaclient --enabledreambox=/dev/dvb/adapter2/fronted0
init 4
sleep 2
init 3
fi
on the system run:
cd /usr/sundtek
chmod 777 startdvb.sh
afterwards reboot
-
I need some more help :)
Script done and rebooted
root@bm750:/usr/sundtek# source startdvb.sh
root@bm750:/usr/sundtek# reboot
No second tuner are visible.
DVBC stick is adapter1 and it is still working.
root@bm750:/dev# /opt/bin/mediaclient -D DVBT -d /dev/dvb/adapter2/frontend0
Using device: /dev/dvb/adapter2/frontend0
unable to open device node: /dev/dvb/adapter2/frontend0
root@bm750:/dev# cd dvb
root@bm750:/dev/dvb# ls
adapter0
root@bm750:/dev/dvb#
Both sticks is connected, i´ve done "install sundtek develop..." again
DVB Info from control center plugin shows just one stick.
dmesg after second stick
usb 1-1: new high speed USB device using brcm-ehci and address 4
usb 1-1: configuration #1 chosen from 1 choice
usbkhelper: dreambox acceleration not detected
usbkhelper: device is attached to a USB 2.0 bus
usbkhelper: using isoc transfer
usbkhelper: registered /dev/ngdvr0
usbkhelper: mknod /dev/ngdvr0 c 254 0
usbkhelper: starting data transfer
usbkhelper: stopping data transfer
-
After connecting the second tuner what does following command show up:
/opt/bin/mediaclient -e
the script requires 2 tuners to be connected
-
After connecting the second tuner what does following command show up:
/opt/bin/mediaclient -e
the script requires 2 tuners to be connected
Both tuners are detected
root@bm750:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [ Sundtek MediaTV Pro] DVB-C, DVB-T, ANALOG-TV, FM-RADIO, REMOTE-CONT ROL, OSS-AUDIO, RDS
[DVB-C]:
FRONTEND: /dev/dvb/adapter1/frontend0
DVR: /dev/dvb/adapter1/dvr0
DMX: /dev/dvb/adapter1/demux0
[DVB-T]:
FRONTEND: /dev/dvb/adapter1/frontend0
DVR: /dev/dvb/adapter1/dvr0
DMX: /dev/dvb/adapter1/demux0
[ANALOG-TV]:
VIDEO0: /dev/video0
VBI0: /dev/vbi0
[FM-RADIO]:
RADIO0: /dev/radio0
RDS: /dev/rds0
[REMOTECONTROL]:
INPUT0: /dev/mediainput0
[OSS]:
OSS0: /dev/dsp0
device 1: [ Sundtek MediaTV Pro] DVB-C, DVB-T, ANALOG-TV, FM-RADIO, REMOTE-CONT ROL, OSS-AUDIO, RDS
[DVB-C]:
FRONTEND: /dev/dvb/adapter1/frontend0
DVR: /dev/dvb/adapter1/dvr0
DMX: /dev/dvb/adapter1/demux0
[DVB-T]:
FRONTEND: /dev/dvb/adapter1/frontend0
DVR: /dev/dvb/adapter1/dvr0
DMX: /dev/dvb/adapter1/demux0
[ANALOG-TV]:
VIDEO0: /dev/video1
VBI0: /dev/vbi1
[FM-RADIO]:
RADIO0: /dev/radio1
RDS: /dev/rds1
[REMOTECONTROL]:
INPUT0: /dev/mediainput1
[OSS]:
OSS0: /dev/dsp1
root@bm750:~#
-
Ok, clearly another driver bug which got introduced because of a workaround which we had to add 2 weeks ago for the latest settopbox enigma version... will be fixed shortly
The problem is that the driver allocates the same adapter number for the devices.
-
Ok, clearly another driver bug which got introduced because of a workaround which we had to add 2 weeks ago for the latest settopbox enigma version... will be fixed shortly
The problem is that the driver allocates the same adapter number for the devices.
Ok, so it wasn´t my dumbness :)
-
This issue should be solved since 19th January, please update the driver
http://www.sundtek.de/media/sundtek_installer.sh
afterwards the description as pointed out above should work.