Autor Thema: quite curious behaviour on Vu plus solo  (Gelesen 8061 mal)

knasson

  • Newbie
  • *
  • Beiträge: 2
    • Profil anzeigen
quite curious behaviour on Vu plus solo
« am: Februar 10, 2011, 11:07:54 Vormittag »

I have installed the drivers for my sundtek dvb s2 usb driver on a Vu+ solo with updated VTI 2.3, when i start a recording on a channel and want to zap to an other channel this action forces the ECM for the new channel to come from the same peer connection (despite the usual priority)
Is that normal?

My softcam is CCcam2.2.1 on Vu+ solo


regards,

knasson

Sundtek

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 8512
    • Profil anzeigen
Re:quite curious behaviour on Vu plus solo
« Antwort #1 am: Februar 10, 2011, 12:06:23 Nachmittag »
Hello,

DVB-S/S2 is still under development as far as we know on VU+ Settopboxes. Please note that we cannot give support for Softcams
Failure is a good thing! I'll fix it

knasson

  • Newbie
  • *
  • Beiträge: 2
    • Profil anzeigen
Re:quite curious behaviour on Vu plus solo
« Antwort #2 am: Februar 10, 2011, 04:52:00 Nachmittag »
thank you for answering me.

I never imagined you could give me a support for the softcam, but i don't understand the reason why the good running of the softcam is influenced by the tuner selection....if you have an idea perhaps i can follow the track and helpmyself  to solve this problem.

regards,

knasson

Sundtek

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 8512
    • Profil anzeigen
Re:quite curious behaviour on Vu plus solo
« Antwort #3 am: Februar 10, 2011, 06:40:54 Nachmittag »
We do not affect any other software on the VU+
If something's wrong there's probably another issue within the VU+ drivers.

I think on VU+ it is possible to route the stream through a normal CAM, we'll try to check this again with VU+ as their DVB-S/S2 support is very new. If you have the device work with VU+ you're probably one of the first one.
Failure is a good thing! I'll fix it