Sundtek Support Forum

English => VU+ - VU Duo Settopbox => Thema gestartet von: knasson am Februar 10, 2011, 11:07:54 Vormittag

Titel: quite curious behaviour on Vu plus solo
Beitrag von: knasson am Februar 10, 2011, 11:07:54 Vormittag

I have installed the drivers for my sundtek dvb s2 usb driver on a Vu+ solo with updated VTI 2.3, when i start a recording on a channel and want to zap to an other channel this action forces the ECM for the new channel to come from the same peer connection (despite the usual priority)
Is that normal?

My softcam is CCcam2.2.1 on Vu+ solo


regards,

knasson

Titel: Re:quite curious behaviour on Vu plus solo
Beitrag von: Sundtek am Februar 10, 2011, 12:06:23 Nachmittag

Hello,

DVB-S/S2 is still under development as far as we know on VU+ Settopboxes. Please note that we cannot give support for Softcams

Titel: Re:quite curious behaviour on Vu plus solo
Beitrag von: knasson am Februar 10, 2011, 04:52:00 Nachmittag

thank you for answering me.

I never imagined you could give me a support for the softcam, but i don't understand the reason why the good running of the softcam is influenced by the tuner selection....if you have an idea perhaps i can follow the track and helpmyself  to solve this problem.

regards,

knasson

Titel: Re:quite curious behaviour on Vu plus solo
Beitrag von: Sundtek am Februar 10, 2011, 06:40:54 Nachmittag

We do not affect any other software on the VU+
If something's wrong there's probably another issue within the VU+ drivers.

I think on VU+ it is possible to route the stream through a normal CAM, we'll try to check this again with VU+ as their DVB-S/S2 support is very new. If you have the device work with VU+ you're probably one of the first one.