Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - cody_rocco

Seiten: [1]
1
Sundtek MediaTV Pro (Europe) / Re:Networksupport, Howto use Sundtek MediaTV in a homenetwork
« am: April 27, 2013, 05:50:53 Nachmittag »
after installing latest openwrt [12.09, 25 apr] on my dir-825, i found that the windows network scanner isn't discovering any device. i used latest drivers for both devices, router and pc.
the router is identified as openwrtmipsr3. after installation / restart i must run manually /opt/bin/mediaclient --start. then, after enabling network in driver, i can see the device locally:

Code: [Auswählen]
root@home:/# /opt/bin/mediaclient  --scan-network
Scanning network for IPTV media servers
------------------------------------------------------------------------------
 IP address       | ID  |  devicename          | Users | Capabilities | Serial
------------------------------------------------------------------------------
 192.168.99.1     | 0   | Sundtek MediaTV Pro (USB 2.0)  |  0   | DVB-T, DVB-C | U111029013012
-  1 IPTV server found -------------------------------------------------------
checking for ports:

Code: [Auswählen]
root@home:/etc/config# netstat -a -p | grep media
tcp        0      0 0.0.0.0:9234            0.0.0.0:*               LISTEN      2880/mediasrv
udp        0      0 0.0.0.0:35245           0.0.0.0:*                           2880/mediasrv
udp        0      0 0.0.0.0:26362           0.0.0.0:*                           2880/mediasrv
unix  2      [ ACC ]     STREAM     LISTENING       3791 2880/mediasrv       @/de/sundtek/mediasocket
unix  3      [ ]         STREAM     CONNECTED       3838 2880/mediasrv       @/de/sundtek/mediasocket
unix  3      [ ]         STREAM     CONNECTED       3818 2880/mediasrv

i can access port 9234 via telnet, from windows [7, 64 bit] - but that's all.

---later edit---
without any modification, the device is now shown in windows network scanner. but now dvbviewer (default settings and codecs + your recommendation), will only scan channels; selecting any of them will give 0% signal. if i'm setting manually the device, eq
Code: [Auswählen]
mediaclient -m DVBC -f 306000000 -S 6900000 -M Q64i'm able to use channels on that transponder.
progdvb will function correct.

2
Sundtek MediaTV Pro (Europe) / Re:Networksupport, Howto use Sundtek MediaTV in a homenetwork
« am: Januar 12, 2013, 01:23:24 Nachmittag »
the problem is still there, with latest windows network driver [9 jan].can't find devices in other networks than that with default gateway (but ping / telnet on mediaclient listening port is working)

3
Sundtek MediaTV Pro (Europe) / Re:Networksupport, Howto use Sundtek MediaTV in a homenetwork
« am: Dezember 30, 2012, 04:26:19 Nachmittag »
first i was thinking the same - and let streamline scanner few more minutes, to scan all networks, without results.
maybe passing the ip range / ip address directly to the software will help. also, it will be useful to know which the mediaserver port is, if it's fixed or dynamic - to set the firewall, when needed.
may you have a happy new year :)

4
Sundtek MediaTV Pro (Europe) / Re:Networksupport, Howto use Sundtek MediaTV in a homenetwork
« am: Dezember 30, 2012, 11:47:45 Vormittag »
as you can see in this ipconfig output, there are 4 networks - one wired, one wireless, two belonging to vmware.
as the main network is 192.168.123. (internet connection, using a dlink dir-825 router - where i tested, as a matter of fact, the media tvpro first, working excellent), there are 192.168.252. and 192.168.221.; the last one is used for an ubuntu virtual machine (NAT).
unless i disconnect all networks but 221, streamline scanner will not find any networked device. after finding and connecting, though, i can reconnect other networks without problems.

5
Sundtek MediaTV Pro (Europe) / Re:Remote Controller in Windows 7
« am: Dezember 29, 2012, 03:48:37 Nachmittag »
aaaand... just a bit before 2013, i'm also asking - any method to use remote control in windows ?)

6
Sundtek MediaTV Pro (Europe) / Re:Networksupport, Howto use Sundtek MediaTV in a homenetwork
« am: Dezember 29, 2012, 03:44:22 Nachmittag »
given the presence of multiple networks, how can i specify to StreamlineScanner which network to use? just asking, because i'm using the device in a virtualised environment - i'm able to find the remote device only if i'm disabling all other networks.

Seiten: [1]