Networksupport, Howto use Sundtek MediaTV in a homenetwork

[cody_rocco]

the problem is still there, with latest windows network driver [9 jan].can't find devices in other networks than that with default gateway (but ping / telnet on mediaclient listening port is working)

[Sundtek]

it's still on the list for one of the next updates, a windows server will also be added soon there's still some work going on in that Area.

[Sundtek]

the problem is still there, with latest windows network driver [9 jan].can't find devices in other networks than that with default gateway (but ping / telnet on mediaclient listening port is working)

problem solved, thanks for the private message/feedback.

[cody_rocco]

after installing latest openwrt [12.09, 25 apr] on my dir-825, i found that the windows network scanner isn't discovering any device. i used latest drivers for both devices, router and pc.
the router is identified as openwrtmipsr3. after installation / restart i must run manually /opt/bin/mediaclient --start. then, after enabling network in driver, i can see the device locally:

Code: [Auswählen]

root@home:/# /opt/bin/mediaclient  --scan-network
Scanning network for IPTV media servers
------------------------------------------------------------------------------
 IP address       | ID  |  devicename          | Users | Capabilities | Serial
------------------------------------------------------------------------------
 192.168.99.1     | 0   | Sundtek MediaTV Pro (USB 2.0)  |  0   | DVB-T, DVB-C | U111029013012
-  1 IPTV server found -------------------------------------------------------
checking for ports:

Code: [Auswählen]

root@home:/etc/config# netstat -a -p | grep media
tcp        0      0 0.0.0.0:9234            0.0.0.0:*               LISTEN      2880/mediasrv
udp        0      0 0.0.0.0:35245           0.0.0.0:*                           2880/mediasrv
udp        0      0 0.0.0.0:26362           0.0.0.0:*                           2880/mediasrv
unix  2      [ ACC ]     STREAM     LISTENING       3791 2880/mediasrv       @/de/sundtek/mediasocket
unix  3      [ ]         STREAM     CONNECTED       3838 2880/mediasrv       @/de/sundtek/mediasocket
unix  3      [ ]         STREAM     CONNECTED       3818 2880/mediasrv

i can access port 9234 via telnet, from windows [7, 64 bit] - but that's all.

---later edit---
without any modification, the device is now shown in windows network scanner. but now dvbviewer (default settings and codecs + your recommendation), will only scan channels; selecting any of them will give 0% signal. if i'm setting manually the device, eq

Code: [Auswählen]

mediaclient -m DVBC -f 306000000 -S 6900000 -M Q64i'm able to use channels on that transponder.
progdvb will function correct.

[Tryon]

Code: [Auswählen]

root@home:/# /opt/bin/mediaclient  --scan-network
Scanning network for IPTV media servers
------------------------------------------------------------------------------
 IP address       | ID  |  devicename          | Users | Capabilities | Serial
------------------------------------------------------------------------------
 192.168.99.1     | 0   | Sundtek MediaTV Pro (USB 2.0)  |  0   | DVB-T, DVB-C | U111029013012
-  1 IPTV server found -------------------------------------------------------
if i'm setting manually the device, eq

Code: [Auswählen]

mediaclient -m DVBC -f 306000000 -S 6900000 -M Q64i'm able to use channels on that transponder.
progdvb will function correct.

another small improvements:

Code: [Auswählen]

Scanning network for IPTV media server

╔═══════════════╤═════╤══════════════════════════════════╤════════╤═════════════════╤═════════════════╗
║  IP address   │  ID │           devicename             │  Users │  Capabilities   │     Serial      ║
╠───────────────┼─────┼──────────────────────────────────┼────────┼─────────────────┼─────────────────╢
║ 192.168.99.1  │  0  │  Sundtek MediaTV Pro (USB 2.0)   │    2   │  DVB-T, DVB-C   │  U111029013012  ║
╠───────────────┴─────┴──────────────────────────────────┴────────┴─────────────────┴─────────────────╢
╙< - 1 IPTV server found >════════════════════════════════════════════════════════════════════════════╝

more importantly for DVB-S

Code: [Auswählen]

╔══════════════════════════════════╤══════════════════════════════════╗
║          Signal:   %             │            Quality:   %          ║
╠──────────────────────────────────┼──────────────────────────────────╢
║██████████████████████████████    │█████████████████████████         ║
╠──────────────────────────────────┴──────────────────────────────────╢
╙BER: 0.00E-           SNR:  dB
It should be easy to count number of chars(correct alignment even if IPv6 address)?