Probleme mit Debian Jessie & TVHeadend

[marc]

Hallo @all

Ich habe immer wieder das Problem das TVHeadend scheinbar keinen Empfang mehr hat.
Es beginnt mit der Kernel meldung "USB disconnect" und danach verabschieden sich meine beiden DVBS adapter nacheinander (mal sofort beide und mal einer nach dem anderen) und kommen nicht wirklich wieder

"/var/log/syslog"

Code: [Auswählen]

Sep  4 11:41:41 bender kernel: [67924.363562] usb 1-3: USB disconnect, device number 6
Sep  4 11:41:41 bender tvheadend[3187]: linuxdvb: DVB-S¹ - read() error 104 (Die Verbindung wurde vom Kommunikationspartner zurückgesetzt)
Sep  4 11:41:41 bender tvheadend[3187]: linuxdvb: adapter removed /dev/dvb/adapter2
Sep  4 11:41:41 bender acpid: input device has been disconnected, fd 10
Sep  4 11:41:41 bender kernel: [67924.606641] usb 1-3: new high-speed USB device number 7 using ehci-pci
Sep  4 11:41:41 bender kernel: [67924.742103] usb 1-3: New USB device found, idVendor=2659, idProduct=1502
Sep  4 11:41:41 bender kernel: [67924.742120] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep  4 11:41:41 bender kernel: [67924.742128] usb 1-3: Product: SkyTV Ultimate V 2016
Sep  4 11:41:41 bender kernel: [67924.742135] usb 1-3: Manufacturer: Sundtek
Sep  4 11:41:41 bender kernel: [67924.742142] usb 1-3: SerialNumber: U160213185506
Sep  4 11:41:43 bender kernel: [67926.103439] input: Sundtek Remote Control as /devices/virtual/input/input14
Sep  4 11:41:43 bender tvheadend[3187]: mpegts: 11953.5H in DVBS-A192 - tuning on DVB-S²
Sep  4 11:41:43 bender tvheadend[3187]: subscription: 2469: "scan" unsubscribing
Sep  4 11:41:43 bender tvheadend[3187]: subscription: 2461: "10.13.83.13 [ osmc | Kodi Media Center ]" subscribing on channel "DRadio Wissen", weight: 150, adapter: "DVB-S²", network: "DVBS-A192", mux: "11953.5H", provider: "ZDFvision",
service: "DRadio Wissen", profile="htsp", hostname="10.13.83.13", username="osmc", client="Kodi Media Center"
Sep  4 11:41:45 bender tvheadend[3187]: linuxdvb: adapter added /dev/dvb/adapter2
Sep  4 11:41:45 bender tvheadend[3187]: htsp: 10.13.83.13 [ osmc | Kodi Media Center ]: Disconnected
Sep  4 11:41:45 bender tvheadend[3187]: subscription: 2461: "10.13.83.13 [ osmc | Kodi Media Center ]" unsubscribing from "DRadio Wissen", hostname="10.13.83.13", username="osmc", client="Kodi Media Center"
Sep  4 11:41:45 bender tvheadend[3187]: epgdb: snapshot start

Es endet dann mit...

Code: [Auswählen]

Sep  4 12:18:18 bender tvheadend[12582]: mpegts: 11567.5V in DVBS-A192 - tuning on DVB-S²
Sep  4 12:18:18 bender tvheadend[12582]: subscription: 009C: "scan" subscribing to mux "11567.5V", weight: 2, adapter: "DVB-S²", network: "DVBS-A192", service: "Raw PID Subscription"
Sep  4 12:18:19 bender tvheadend[12582]: linuxdvb: DVB-S² - poll TIMEOUT
Sep  4 12:18:19 bender tvheadend[12582]: linuxdvb: DVB-S² - retune nodata
Sep  4 12:18:27 bender tvheadend[12582]: linuxdvb: DVB-S² - poll TIMEOUT
Sep  4 12:18:27 bender tvheadend[12582]: linuxdvb: DVB-S² - retune nodata
Sep  4 12:18:28 bender tvheadend[12582]: mpegts: 11567.5V in DVBS-A192 - scan no data, failed
Sep  4 12:18:28 bender tvheadend[12582]: subscription: 009C: "scan" unsubscribing
Sep  4 12:18:38 bender tvheadend[12582]: mpegts: 11611.75H in DVBS-A192 - tuning on DVB-S²
Sep  4 12:18:38 bender tvheadend[12582]: subscription: 009F: "scan" subscribing to mux "11611.75H", weight: 2, adapter: "DVB-S²", network: "DVBS-A192", service: "Raw PID Subscription"
Sep  4 12:18:39 bender tvheadend[12582]: linuxdvb: DVB-S² - poll TIMEOUT
Sep  4 12:18:39 bender tvheadend[12582]: linuxdvb: DVB-S² - retune nodata
Sep  4 12:18:46 bender tvheadend[12582]: linuxdvb: DVB-S² - poll TIMEOUT
Sep  4 12:18:47 bender tvheadend[12582]: linuxdvb: DVB-S² - retune nodata
Sep  4 12:18:48 bender tvheadend[12582]: mpegts: 11611.75H in DVBS-A192 - scan no data, failed
Sep  4 12:18:48 bender tvheadend[12582]: subscription: 009F: "scan" unsubscribing
Sep  4 12:18:58 bender tvheadend[12582]: mpegts: 11641.25H in DVBS-A192 - tuning on DVB-S²
Sep  4 12:18:58 bender tvheadend[12582]: subscription: 00A2: "scan" subscribing to mux "11641.25H", weight: 2, adapter: "DVB-S²", network: "DVBS-A192", service: "Raw PID Subscription"
Sep  4 12:18:59 bender tvheadend[12582]: linuxdvb: DVB-S² - poll TIMEOUT
Sep  4 12:18:59 bender tvheadend[12582]: linuxdvb: DVB-S² - retune nodata
Sep  4 12:19:06 bender tvheadend[12582]: linuxdvb: DVB-S² - poll TIMEOUT
Sep  4 12:19:07 bender tvheadend[12582]: linuxdvb: DVB-S² - retune nodata
Sep  4 12:19:08 bender tvheadend[12582]: mpegts: 11641.25H in DVBS-A192 - scan no data, failed
Sep  4 12:19:08 bender tvheadend[12582]: subscription: 00A2: "scan" unsubscribing
Sep  4 12:19:18 bender tvheadend[12582]: mpegts: 11685.5V in DVBS-A192 - tuning on DVB-S²
Sep  4 12:19:18 bender tvheadend[12582]: subscription: 00A5: "scan" subscribing to mux "11685.5V", weight: 2, adapter: "DVB-S²", network: "DVBS-A192", service: "Raw PID Subscription"
Sep  4 12:19:19 bender tvheadend[12582]: linuxdvb: DVB-S² - poll TIMEOUT
Sep  4 12:19:19 bender tvheadend[12582]: linuxdvb: DVB-S² - retune nodata
Sep  4 12:19:26 bender tvheadend[12582]: linuxdvb: DVB-S² - poll TIMEOUT
Sep  4 12:19:27 bender tvheadend[12582]: linuxdvb: DVB-S² - retune nodata
Sep  4 12:19:28 bender tvheadend[12582]: mpegts: 11685.5V in DVBS-A192 - scan no data, failed
Sep  4 12:19:28 bender tvheadend[12582]: subscription: 00A5: "scan" unsubscribing
Sep  4 12:19:38 bender tvheadend[12582]: mpegts: 10979V in DVBS-A192 - tuning on DVB-S²
Sep  4 12:19:38 bender tvheadend[12582]: subscription: 00A8: "scan" subscribing to mux "10979V", weight: 2, adapter: "DVB-S²", network: "DVBS-A192", service: "Raw PID Subscription"
Sep  4 12:19:39 bender tvheadend[12582]: linuxdvb: DVB-S² - poll TIMEOUT
Sep  4 12:19:39 bender tvheadend[12582]: linuxdvb: DVB-S² - retune nodata

"/opt/bin/mediaclient -e"
Sagt das alle Adapter da und aktiv sind.

Auch mit und ohne Netzteile.

Takt der CPU ist fest auf 800MHz (QuadCore).

"uname -a"
Linux bender 4.6.0-0.bpo.1-amd64 #1 SMP Debian 4.6.4-1~bpo8+1 (2016-08-11) x86_64 GNU/Linux

"tvheadend -v"
tvheadend: version 4.0.9-12~ge5400e2~jessie

Der Treiber ist auch der Aktuelle.

Nach einem Neustart des Servers geht es für unbestimmte Zeit und dann geht es von vorn wieder los.

So langsam weiß ich nicht mehr weiter :-/

EDIT: Noch eine kleine Info zu meiner Schüssel, ich habe die H50D2 von Selfsat.

Grüße, der Marc

[Sundtek]

Was zeigt /opt/bin/mediaclient -e an?

Du kannst auch mal im Chat vorbeischauen http://chat.sundtek.de

[marc]

Was zeigt /opt/bin/mediaclient -e an?

Du kannst auch mal im Chat vorbeischauen http://chat.sundtek.de

Code: [Auswählen]

**** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate V (2015)]  DVB-S/S2, REMOTE-CONTROL
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 1-1
  [SERIAL]:
     ID: U150619122826
  [DVB-S/S2]:
     FESTATUS: ACTIVE
     LNBVOLTAGE: ENABLED
     LNBSUPPLY: USBPOWER
     LNBSTATUS: OK
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

device 1: [MediaTV Pro III USB (EU)]  DVB-C, DVB-T, DVB-T2, FM-RADIO, REMOTE-CONTROL, OSS-AUDIO, RDS
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 1-2
  [SERIAL]:
     ID: U150219010310
  [DVB-C]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [DVB-T]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [DVB-T2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [FM-RADIO]:
     RADIO0: /dev/radio0
     RDS: /dev/rds0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput1
  [OSS]:
     OSS0: /dev/dsp0

device 2: [Sundtek SkyTV Ultimate V (2015)]  DVB-S/S2, REMOTE-CONTROL
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 1-3
  [SERIAL]:
     ID: U160213185506
  [DVB-S/S2]:
     FESTATUS: ACTIVE
     LNBVOLTAGE: ENABLED
     LNBSUPPLY: USBPOWER
     LNBSTATUS: OK
     FRONTEND: /dev/dvb/adapter2/frontend0
     DVR: /dev/dvb/adapter2/dvr0
     DMX: /dev/dvb/adapter2/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput2


[Sundtek]

laut der Logfile welche Du im Chat gepostet hast

[    1.211287] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.211303] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.211320] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.211338] ehci-pci 0000:00:12.2: debug port 1
[    1.211395] ehci-pci 0000:00:12.2: irq 17, io mem 0xffb64000

AMD USB Controller funktionieren unter Linux nicht fehlerfrei, die besten die es gibt verwenden einen Chipsatz von ASIX in Taiwan (ASIX hat die Controller von MosChip aus Indien übernommen).
Ein billiger PCI USB 2.0 Controller sollte für das alte AMD Board aber ausreichen um's stabil hinzubekommen (das wurde soweit auch schon von anderen Betroffenen bestätigt)