Solo2 mit 2 Netzwertunern

[findex]

Zusätzlich dieses hier:

SERVER:
HomeServer> /volume1/@appstore/sundtek/opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate III (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [BUS]:
     ID: 2-5.5
  [SERIAL]:
     ID: U120420150139
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

device 1: [Sundtek SkyTV Ultimate III (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [BUS]:
     ID: 2-5.7
  [SERIAL]:
     ID: U120420150040
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput1
HomeServer>

CLIENT
root@vusolo2:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices **** device 0: [Sundtek SkyTV Ultimate III (USB 2.0) (192.168.1.100)]  DVB-S/S2, NETWORK-DEVICE
  [NETWORKPATH]:
     PATH: 192.168.1.100:0
  [SERIAL]:
     ID: U120420150139
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0

device 1: [Sundtek SkyTV Ultimate III (USB 2.0) (192.168.1.100)]  DVB-S/S2, NETWORK-DEVICE
  [NETWORKPATH]:
     PATH: 192.168.1.100:1
  [SERIAL]:
     ID: U120420150040
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter2/frontend0
     DVR: /dev/dvb/adapter2/dvr0
     DMX: /dev/dvb/adapter2/demux0
root@vusolo2:~#

[Sundtek]

Das sieht soweit auch gut aus, ein Techniker sieht da heute noch drüber; Eine Antwort kann aber wohl noch bis morgen andauern

[findex]

Habe jetzt nur den Receiver neu gestartet und anschließend eine neue Aufnahme gestartet:

Ausgaben sehen so aus:

SERVER:

BusyBox v1.16.1 (2014-03-06 14:29:34 CST) built-in shell (ash) Enter 'help' for a list of built-in commands.

HomeServer> /volume1/@appstore/sundtek/opt/bin/mediaclient --lc
**** List of Media Clients ****
/dev/dvb/adapter0/frontend0:
  No client connected
/dev/dvb/adapter0/dvr0:
  No client connected
/dev/dvb/adapter0/demux0:
  No client connected
/dev/mediainput0:
  No client connected
/dev/dvb/adapter1/frontend0:
  13393 ... mediasrv
/dev/dvb/adapter1/dvr0:
  13393 ... mediasrv
/dev/dvb/adapter1/demux0:
  13393 ... mediasrv (0000)
  13393 ... mediasrv (0022)
  13393 ... mediasrv (0062)
  13393 ... mediasrv (02ff)
  13393 ... mediasrv (0303)
  13393 ... mediasrv (19ee)
/dev/mediainput1:
  No client connected

HomeServer> /volume1/@appstore/sundtek/opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate III (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [BUS]:
     ID: 2-5.5
  [SERIAL]:
     ID: U120420150139
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

device 1: [Sundtek SkyTV Ultimate III (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [BUS]:
     ID: 2-5.7
  [SERIAL]:
     ID: U120420150040
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput1
HomeServer>

CLIENT - openpli 4 vusolo2

vusolo2 login: root
root@vusolo2:~# /opt/bin/mediaclient --lc
**** List of Media Clients ****
/dev/dvb/adapter1/frontend0:
  No client connected
/dev/dvb/adapter1/dvr0:
  No client connected
/dev/dvb/adapter1/demux0:
  No client connected
/dev/dvb/adapter2/frontend0:
  470 ... enigma2
  449 ... mediasrv
/dev/dvb/adapter2/dvr0:
  No client connected
/dev/dvb/adapter2/demux0:
  449 ... mediasrv (0000)
  449 ... mediasrv (0022)
  449 ... mediasrv (0062)
  449 ... mediasrv (02ff)
  449 ... mediasrv (0303)
  449 ... mediasrv (19ee)

root@vusolo2:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices **** device 0: [Sundtek SkyTV Ultimate III (USB 2.0) (192.168.1.100)]  DVB-S/S2, NETWORK-DEVICE
  [NETWORKPATH]:
     PATH: 192.168.1.100:0
  [SERIAL]:
     ID: U120420150139
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0

device 1: [Sundtek SkyTV Ultimate III (USB 2.0) (192.168.1.100)]  DVB-S/S2, NETWORK-DEVICE
  [NETWORKPATH]:
     PATH: 192.168.1.100:1
  [SERIAL]:
     ID: U120420150040
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter2/frontend0
     DVR: /dev/dvb/adapter2/dvr0
     DMX: /dev/dvb/adapter2/demux0
root@vusolo2:~#

So läuft alles wie es sollte.

[Sundtek]

Bist du im Skype erreichbar?