Autor Thema: Solo2 mit 2 Netzwertunern  (Gelesen 16944 mal)

findex

  • Jr. Member
  • **
  • Beiträge: 50
    • Profil anzeigen
Re:Solo2 mit 2 Netzwertunern
« Antwort #15 am: April 23, 2014, 04:47:28 Nachmittag »
Zusätzlich dieses hier:

SERVER:
HomeServer> /volume1/@appstore/sundtek/opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate III (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [BUS]:
     ID: 2-5.5
  [SERIAL]:
     ID: U120420150139
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

device 1: [Sundtek SkyTV Ultimate III (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [BUS]:
     ID: 2-5.7
  [SERIAL]:
     ID: U120420150040
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput1
HomeServer>

CLIENT
root@vusolo2:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices **** device 0: [Sundtek SkyTV Ultimate III (USB 2.0) (192.168.1.100)]  DVB-S/S2, NETWORK-DEVICE
  [NETWORKPATH]:
     PATH: 192.168.1.100:0
  [SERIAL]:
     ID: U120420150139
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0

device 1: [Sundtek SkyTV Ultimate III (USB 2.0) (192.168.1.100)]  DVB-S/S2, NETWORK-DEVICE
  [NETWORKPATH]:
     PATH: 192.168.1.100:1
  [SERIAL]:
     ID: U120420150040
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter2/frontend0
     DVR: /dev/dvb/adapter2/dvr0
     DMX: /dev/dvb/adapter2/demux0
root@vusolo2:~#
« Letzte Änderung: April 23, 2014, 04:48:33 Nachmittag von Sundtek »

Sundtek

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 8604
    • Profil anzeigen
Re:Solo2 mit 2 Netzwertunern
« Antwort #16 am: April 23, 2014, 04:49:12 Nachmittag »
Das sieht soweit auch gut aus, ein Techniker sieht da heute noch drüber; Eine Antwort kann aber wohl noch bis morgen andauern
Failure is a good thing! I'll fix it

findex

  • Jr. Member
  • **
  • Beiträge: 50
    • Profil anzeigen
Re:Solo2 mit 2 Netzwertunern
« Antwort #17 am: April 23, 2014, 05:06:41 Nachmittag »
Habe jetzt nur den Receiver neu gestartet und anschließend eine neue Aufnahme gestartet:

Ausgaben sehen so aus:

SERVER:

BusyBox v1.16.1 (2014-03-06 14:29:34 CST) built-in shell (ash) Enter 'help' for a list of built-in commands.

HomeServer> /volume1/@appstore/sundtek/opt/bin/mediaclient --lc
**** List of Media Clients ****
/dev/dvb/adapter0/frontend0:
  No client connected
/dev/dvb/adapter0/dvr0:
  No client connected
/dev/dvb/adapter0/demux0:
  No client connected
/dev/mediainput0:
  No client connected
/dev/dvb/adapter1/frontend0:
  13393 ... mediasrv
/dev/dvb/adapter1/dvr0:
  13393 ... mediasrv
/dev/dvb/adapter1/demux0:
  13393 ... mediasrv (0000)
  13393 ... mediasrv (0022)
  13393 ... mediasrv (0062)
  13393 ... mediasrv (02ff)
  13393 ... mediasrv (0303)
  13393 ... mediasrv (19ee)
/dev/mediainput1:
  No client connected

HomeServer> /volume1/@appstore/sundtek/opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate III (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [BUS]:
     ID: 2-5.5
  [SERIAL]:
     ID: U120420150139
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

device 1: [Sundtek SkyTV Ultimate III (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [BUS]:
     ID: 2-5.7
  [SERIAL]:
     ID: U120420150040
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput1
HomeServer>

CLIENT - openpli 4 vusolo2

vusolo2 login: root
root@vusolo2:~# /opt/bin/mediaclient --lc
**** List of Media Clients ****
/dev/dvb/adapter1/frontend0:
  No client connected
/dev/dvb/adapter1/dvr0:
  No client connected
/dev/dvb/adapter1/demux0:
  No client connected
/dev/dvb/adapter2/frontend0:
  470 ... enigma2
  449 ... mediasrv
/dev/dvb/adapter2/dvr0:
  No client connected
/dev/dvb/adapter2/demux0:
  449 ... mediasrv (0000)
  449 ... mediasrv (0022)
  449 ... mediasrv (0062)
  449 ... mediasrv (02ff)
  449 ... mediasrv (0303)
  449 ... mediasrv (19ee)

root@vusolo2:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices **** device 0: [Sundtek SkyTV Ultimate III (USB 2.0) (192.168.1.100)]  DVB-S/S2, NETWORK-DEVICE
  [NETWORKPATH]:
     PATH: 192.168.1.100:0
  [SERIAL]:
     ID: U120420150139
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0

device 1: [Sundtek SkyTV Ultimate III (USB 2.0) (192.168.1.100)]  DVB-S/S2, NETWORK-DEVICE
  [NETWORKPATH]:
     PATH: 192.168.1.100:1
  [SERIAL]:
     ID: U120420150040
  [DVB-S/S2]:
     FRONTEND: /dev/dvb/adapter2/frontend0
     DVR: /dev/dvb/adapter2/dvr0
     DMX: /dev/dvb/adapter2/demux0
root@vusolo2:~#

So läuft alles wie es sollte.

Sundtek

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 8604
    • Profil anzeigen
Re:Solo2 mit 2 Netzwertunern
« Antwort #18 am: April 23, 2014, 08:56:08 Nachmittag »
Bist du im Skype erreichbar?
Failure is a good thing! I'll fix it