1
Drivers / Re:Sundtek DVB-T and Wetek
« am: April 02, 2016, 06:58:17 Nachmittag »
Thanks.
Beiträge anzeigen
Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.
2
Drivers / Re:Sundtek DVB-T and Wetek
« am: April 02, 2016, 02:41:45 Nachmittag »The tuner is now visible in E2 but it still doesn't work
Did you get it to work?
only tried to install drivers with SSI and then with Sundtek Control Center.
Using now newest OpenATV 5.1
3
VU+ - VU Duo Settopbox / Re:Two MediaTV Pro sticks do not work on Solo2 with new drivers
« am: September 16, 2013, 04:13:21 Nachmittag »
Wuhuu, everything seems to be Ok again!
4
VU+ - VU Duo Settopbox / Re:Two MediaTV Pro sticks do not work on Solo2 with new drivers
« am: September 16, 2013, 03:19:49 Nachmittag »
Yes, new update to drivers!
20130916
- Fix vtuner problem(duo2, solo2)
I will test those today.
20130916
- Fix vtuner problem(duo2, solo2)
I will test those today.
5
VU+ - VU Duo Settopbox / Two MediaTV Pro sticks do not work on Solo2 with new drivers
« am: September 05, 2013, 05:08:03 Nachmittag »
Hello,
Looks like there's an issue with Sundteks with the new drivers of VU+.
Image: OpenVIX build 729 (tested 733 also)
Box: Solo2
USB sticks: Two MediaTV Pro
Sundtek drivers are latest, installed with SSI
Vu+ Drivers date -> Issue
20130802 -> Everything Ok
20130819 -> Only C tuner is recognized, but it work
20130904 -> It won´t even boot till to end.
It can be easily reproduced, just change driver files and reboot the box.
Drivers log:
http://archive.vuplus.com/download/drivers/log.txt
Looks like there's an issue with Sundteks with the new drivers of VU+.
Image: OpenVIX build 729 (tested 733 also)
Box: Solo2
USB sticks: Two MediaTV Pro
Sundtek drivers are latest, installed with SSI
Vu+ Drivers date -> Issue
20130802 -> Everything Ok
20130819 -> Only C tuner is recognized, but it work
20130904 -> It won´t even boot till to end.
It can be easily reproduced, just change driver files and reboot the box.
Drivers log:
http://archive.vuplus.com/download/drivers/log.txt
6
VU+ - VU Duo Settopbox / Re:Vu + DUO support
« am: November 29, 2012, 01:41:43 Nachmittag »
Ok. Newest now installed. We'll see whats going to happen with them.
Build date: 2012-11-28 16:25:45
Build date: 2012-11-28 16:25:45
7
VU+ - VU Duo Settopbox / Re:Vu + DUO support
« am: November 29, 2012, 12:45:45 Nachmittag »
Ok.
From OpenPli forum
How i can install older drivers?
If i'll try that one first or try latest ones from you.. If there has anything changed to VU+ from 13.11 to 27.11?
edit: Found it
http://www.sundtek.de/media/sundtek_installer_12102
7.112338.sh
From OpenPli forum
Zitat
I am running open pli 3.0 (2012-11-12), sundtek drivers 121027.112338 (I experienced some problems with later drivers, didn't test the newest ones), oscam-experimental. I have two usb dvb-c tuners connected to two rear usb ports without any hub and everything works ok. Finally!!!
How i can install older drivers?
If i'll try that one first or try latest ones from you.. If there has anything changed to VU+ from 13.11 to 27.11?
edit: Found it
http://www.sundtek.de/media/sundtek_installer_12102
7.112338.sh
8
VU+ - VU Duo Settopbox / Re:Vu + DUO support
« am: November 29, 2012, 12:09:44 Nachmittag »
Thanks. Looks like BH did have modules from 20120820 (not 100% sure about this) and VIX has drivers 20121025.
I´ll give a try.
But how about that --dtvtransfermode=bulk?
If driver change do not give help, this can give?
I´ll give a try.
But how about that --dtvtransfermode=bulk?
If driver change do not give help, this can give?
9
VU+ - VU Duo Settopbox / Re:Vu + DUO support
« am: November 29, 2012, 08:07:08 Vormittag »
Maybe setting the devicemode to bulk by running following command:Zitat/opt/bin/mediaclient --dtvtransfermode=bulk -d /dev/dvb/adapter1/frontend0
What this command will really do?
If I'll give this command will it last after reboot also?
I changed Vu+ DUO image from BlackHole 1.7.8 to OpenVIX (Newest build) and I see this same issues what flc has seen. There wasn´t this kind of issue with BH it do work like a charm. So what to do, is there working workaround?
Problem starts maybe after one day. Reboots help to get clear picture again for a while.
I do have 2x Sundtek Pro. First one is used for C-channels and second for T-channels, both sticks are connected to active USB hub.
I have used 13.11 drivers with BH and OpenVIX.
root@vuduo:~# /opt/bin/mediaclient --build
Build date: 2012-11-13 17:48:18
I have used this kind of sundtek.conf
Code: [Auswählen]
root@vuduo:/etc# cat sundtek.conf
[tek00147]
initial_dvb_mode=DVBC
dreambox_support_fe1=on
[tek001477]
initial_dvb_mode=DVBT
dreambox_support_fe1=on
10
VU+ - VU Duo Settopbox / Re:Media TVPro problems
« am: März 24, 2012, 03:13:24 Nachmittag »
Ok, stats are pretty hebrew to me 
This was from VU+ DUO
another capture with just rebooted & viewing T-channel
This was from VU+ DUO
another capture with just rebooted & viewing T-channel
Code: [Auswählen]
Mem: 131832K used, 6508K free, 0K shrd, 0K buff, 44020K cached
CPU: 2.4% usr 4.0% sys 0.0% nic 92.5% idle 0.0% io 0.0% irq 0.8% sirq
Load average: 0.99 1.40 1.41 3/106 5889
PID PPID USER STAT VSZ %MEM CPU %CPU COMMAND
864 1 root S 115m 84.9 1 1.8 /opt/bin/mediasrv -d --no-nodes
860 857 root S 141m104.7 1 1.5 /usr/bin/enigma2
5864 1 root S 115m 84.9 1 1.3 /opt/bin/mediasrv -d --no-nodes
67 2 root SW 0 0.0 0 0.7 [sched_high]
5852 5849 root R 2888 2.0 0 0.2 top
863 1 root S 115m 84.9 0 0.1 /opt/bin/mediasrv -d --no-nodes
3 2 root SW 0 0.0 0 0.1 [ksoftirqd/0]
868 857 root S 141m104.7 1 0.0 /usr/bin/enigma2
898 857 root S 141m104.7 1 0.0 /usr/bin/enigma2
937 857 root S N 141m104.7 0 0.0 /usr/bin/enigma2
11
VU+ - VU Duo Settopbox / Re:Media TVPro problems
« am: März 23, 2012, 06:53:33 Nachmittag »
There is this, now and then. Issues with memory?
Uptime is now 7 days and that looks like it to be pretty maximum uptime to view T-channels with Sundtek. After reboot T-channels are Ok again.
Drivers:
Build date: Mar 5 2012
Uptime is now 7 days and that looks like it to be pretty maximum uptime to view T-channels with Sundtek. After reboot T-channels are Ok again.
Drivers:
Build date: Mar 5 2012
Code: [Auswählen]
Mem: 135260K used, 3080K free, 0K shrd, 0K buff, 36724K cached
CPU: 2.8% usr 23.2% sys 0.0% nic 33.0% idle 22.7% io 0.0% irq 18.1% sirq
Load average: 5.79 5.25 3.44 4/112 24030
PID PPID USER STAT VSZ %MEM CPU %CPU COMMAND
67 2 root RW 0 0.0 1 21.9 [sched_high]
23037 2 root SW 0 0.0 0 5.8 [kworker/0:0]
3 2 root SW 0 0.0 0 1.8 [ksoftirqd/0]
22707 849 root S 156m115.7 1 1.5 /usr/bin/enigma2
23610 849 root S 156m115.7 1 1.5 /usr/bin/enigma2
23921 2 root SW 0 0.0 1 1.5 [kworker/1:1]
23633 1 root S 114m 84.4 1 0.9 /opt/bin/mediasrv -d --no-nodes
860 849 root S 156m115.7 1 0.7 /usr/bin/enigma2
23644 849 root D 156m115.7 1 0.5 /usr/bin/enigma2
23945 23931 root R 2888 2.0 1 0.3 top
19 2 root RW 0 0.0 0 0.3 [kswapd0]
23451 849 root D 156m115.7 1 0.2 /usr/bin/enigma2
23926 581 root S 2664 1.9 1 0.1 /usr/sbin/dropbear -r /etc/dropbea
66 2 root SW 0 0.0 0 0.1 [sched_low]
20855 2 root SW 0 0.0 0 0.1 [kdvb-ad-0-fe-0]
852 849 root D 156m115.7 1 0.0 /usr/bin/enigma2
890 849 root S 156m115.7 1 0.0 /usr/bin/enigma2
935 849 root S N 156m115.7 1 0.0 /usr/bin/enigma2
13
VU+ - VU Duo Settopbox / Re:Vu + DUO support
« am: März 10, 2012, 04:46:40 Nachmittag »
Is there some command which i can use to check version of my sundtek drivers?
or how i can be sure that stick firmware is updated?
or how i can be sure that stick firmware is updated?
14
VU+ - VU Duo Settopbox / Cable recording issues
« am: Dezember 15, 2011, 12:20:00 Nachmittag »
I got issues with cable recordings, in normal situation I use Sundtek as C tuner only for one cable channel and many many times, recordings hasn't work properly.
1. it has recorded maybe 10minutes from start
2. recording is just blackscreen and it stops immediately after trying to play it.
3. Record is pixelated, lot´s of glitches.
All Cable channels which I use are FTA channels, so it is not any CAM issue.
I have also used C-tuner channels as alternativate services for satellite channels and looks like when VU+ DUO has recorded from C-tuner issues are there.
i haven´t tested not so much the issues, but looks like live TV wathing with Sundtek stick is Ok. All DVB-S2 works perfectly even if there is many recordings at the same time.
Read/Write troughput from VU+ to NAS (so it is not network transfer issue):
Dev. drivers updated couple of days a go and it is tested with both Sundtek Pro sticks which i do have and image is now BH 1.6.6
Will powered USB hub give some advantages?
PS. Same message (only shorter) is in BH forum, so you can ignore it from there.
1. it has recorded maybe 10minutes from start
2. recording is just blackscreen and it stops immediately after trying to play it.
3. Record is pixelated, lot´s of glitches.
All Cable channels which I use are FTA channels, so it is not any CAM issue.
I have also used C-tuner channels as alternativate services for satellite channels and looks like when VU+ DUO has recorded from C-tuner issues are there.
i haven´t tested not so much the issues, but looks like live TV wathing with Sundtek stick is Ok. All DVB-S2 works perfectly even if there is many recordings at the same time.
Read/Write troughput from VU+ to NAS (so it is not network transfer issue):
Code: [Auswählen]
Results for write throughput:
76.695 Mbit/s with udp,async,wsize=16384
76.695 Mbit/s with tcp,async,wsize=4096
67.108 Mbit/s with udp,async,wsize=8192
67.108 Mbit/s with udp,async,wsize=4096
67.108 Mbit/s with udp,async,wsize=32768
67.108 Mbit/s with tcp,async,wsize=8192
67.108 Mbit/s with tcp,async,wsize=32768
67.108 Mbit/s with tcp,async,wsize=16384
Results for read throughput:
89.478 Mbit/s with udp,async,rsize=8192
89.478 Mbit/s with udp,async,rsize=32768
89.478 Mbit/s with udp,async,rsize=16384
89.478 Mbit/s with tcp,async,rsize=8192
89.478 Mbit/s with tcp,async,rsize=4096
89.478 Mbit/s with tcp,async,rsize=32768
89.478 Mbit/s with tcp,async,rsize=16384
76.695 Mbit/s with udp,async,rsize=4096Dev. drivers updated couple of days a go and it is tested with both Sundtek Pro sticks which i do have and image is now BH 1.6.6
Will powered USB hub give some advantages?
PS. Same message (only shorter) is in BH forum, so you can ignore it from there.
15
VU+ - VU Duo Settopbox / Re:Do not get Pro stick to work now?
« am: April 03, 2011, 04:31:08 Nachmittag »you might follow our documentation:
http://support.sundtek.com/index.php/topic,348.0.html
Some Dreambox Sundtek Control Center versions are not compatible with VU+
Thank you again!
That was easy to fix