1
Sundtek MediaTV Pro (Europe) / Re:Raspberry Pi 2
« am: April 07, 2015, 05:42:16 Nachmittag »
I just got the codecs and now everything works solid and fast! IT was the codecs that was the problem! Who would've thought?
Beiträge anzeigen
Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.
Seiten: [1]
2
Sundtek MediaTV Pro (Europe) / Re:raspberry pi + sundtek then view in a dreambox
« am: April 06, 2015, 10:39:48 Nachmittag »
The Sundtek stick is an absolutely amazing product!
There were several who wanted to buy my stick but i refused and redirected them to your webshop
There were several who wanted to buy my stick but i refused and redirected them to your webshop
3
Sundtek MediaTV Pro (Europe) / Re:Raspberry Pi 2
« am: April 06, 2015, 10:38:19 Nachmittag »
Thanks for the response mate. I'm waiting for the codecs to arrive.
I just also did another test.
I closed down the client in the RPI 2 and let only tvheadend server run.
I then used my normal HTPC (AMD E350 Fusion) with tvheadend client to connect to the RPI 2 tvheadend server and the channel switching was normal.
So obviously the sundtek usb stick itself is not the problem at all, nor the tvheadend server running in the RPI 2.
I will try to narrow it down to see what is so slow
I've had this Sundtek stick for two years and i must say it is growing on me and i'm extremly impressed by it.
Well done!
I just also did another test.
I closed down the client in the RPI 2 and let only tvheadend server run.
I then used my normal HTPC (AMD E350 Fusion) with tvheadend client to connect to the RPI 2 tvheadend server and the channel switching was normal.
So obviously the sundtek usb stick itself is not the problem at all, nor the tvheadend server running in the RPI 2.
I will try to narrow it down to see what is so slow
I've had this Sundtek stick for two years and i must say it is growing on me and i'm extremly impressed by it.
Well done!
4
Sundtek MediaTV Pro (Europe) / Raspberry Pi 2
« am: April 04, 2015, 09:42:37 Nachmittag »
I just got the Raspberry Pi 2 and i'm really impressed by this little thing.
I already have the Raspberry Pi 1 (not b+) and this is a major upgrade!
I'm running openelec + tvheadend. Tvheadend server can be installed under Unofficial RPI 2 repository available in the addons list.
However, when i Switch channels, it's really slow (around 10 seconds, i'm used to around 1-1.5 seconds). Now i don't have the mpeg2 codecs installed and that might be the issue (i haven't recieved the codes yet).
Yesterday i installed raspbian on the RPI 1 and the tvheadend server and streamed channels to another HTPC via WLAN and the channel switching was just as fast as before. Faster than any Enigma 2 settop box!
I tried playing around some settings but nothing has helped.
Any clues?
I created this thread for future RPI 2 questions for everyone!
Edit: forgot to mention that the HTPC I've been running with fast channel changing was not any of my raspberry Pi's
Maybe it is supposed to switch this slow with a RPI. But when the RPI runs as a tvheadend server but I view the channel on another client, the channel switching is fast on the client side.
I already have the Raspberry Pi 1 (not b+) and this is a major upgrade!
I'm running openelec + tvheadend. Tvheadend server can be installed under Unofficial RPI 2 repository available in the addons list.
However, when i Switch channels, it's really slow (around 10 seconds, i'm used to around 1-1.5 seconds). Now i don't have the mpeg2 codecs installed and that might be the issue (i haven't recieved the codes yet).
Yesterday i installed raspbian on the RPI 1 and the tvheadend server and streamed channels to another HTPC via WLAN and the channel switching was just as fast as before. Faster than any Enigma 2 settop box!
I tried playing around some settings but nothing has helped.
Any clues?
I created this thread for future RPI 2 questions for everyone!
Edit: forgot to mention that the HTPC I've been running with fast channel changing was not any of my raspberry Pi's
Maybe it is supposed to switch this slow with a RPI. But when the RPI runs as a tvheadend server but I view the channel on another client, the channel switching is fast on the client side.
5
Sundtek MediaTV Pro (Europe) / Re:raspberry pi + sundtek then view in a dreambox
« am: April 03, 2015, 09:57:39 Nachmittag »
I think I figured it out. I need to install the sundtek drivers on the dream box, bind the remote sundtek stick with mediaclient and voila, a new remote tuner is available as if it was local.
6
Sundtek MediaTV Pro (Europe) / raspberry pi + sundtek then view in a dreambox
« am: April 03, 2015, 06:34:28 Nachmittag »
Is it possible to view the channels on an enigma2 settop box (dreambox) streamed from a raspberry pi + sundtek? How would I set it up in the dreambox?
7
Sundtek MediaTV Pro (Europe) / Re:Sundtek keeps dropping (freezing) from Openelec and requires a power cycle
« am: April 02, 2015, 11:18:38 Nachmittag »
Oh boy, great! Thanks!
A small question.
Which XBMC PVRs can connect to that TV server?
I would guess Tvheadend doesn't work?
Edit: I still haven't figured it out since yesterday. Would appreciate a small hint
I will be running the TV server on the raspberry pi. I will then use a HTPC with openelec and XBMC to connect to that TV Server.
A small question.
Which XBMC PVRs can connect to that TV server?
I would guess Tvheadend doesn't work?
Edit: I still haven't figured it out since yesterday. Would appreciate a small hint
I will be running the TV server on the raspberry pi. I will then use a HTPC with openelec and XBMC to connect to that TV Server.
8
Sundtek MediaTV Pro (Europe) / Re:Sundtek keeps dropping (freezing) from Openelec and requires a power cycle
« am: April 02, 2015, 10:16:04 Nachmittag »
Thanks for the response mate.
That is probably my problem.
I'm very curious about the raspberry pi option running as a tv server.
I'm a little lost here. What's your tips?
If i say
Rasbian
Sundtek drivers
Tvheadend
Is that a good idea or do you have an even better idea?
That is probably my problem.
I'm very curious about the raspberry pi option running as a tv server.
I'm a little lost here. What's your tips?
If i say
Rasbian
Sundtek drivers
Tvheadend
Is that a good idea or do you have an even better idea?
9
Sundtek MediaTV Pro (Europe) / Re:Sundtek keeps dropping (freezing) from Openelec and requires a power cycle
« am: März 31, 2015, 09:44:38 Nachmittag »
Hey, thanks for the response.
I don't have any USB 3 ports.
It shows up this:
OpenELEC:~ # lsusb -t
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/4p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M
|__ Port 5: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 5: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 5: Dev 2, If 2, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=ath9k_htc, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M
|__ Port 3: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 480M
OpenELEC:~ #
I'm using an AMD Fusion E350
I don't have any USB 3 ports.
It shows up this:
OpenELEC:~ # lsusb -t
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/4p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M
|__ Port 5: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 5: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 5: Dev 2, If 2, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=ath9k_htc, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M
|__ Port 3: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 480M
OpenELEC:~ #
I'm using an AMD Fusion E350
10
Sundtek MediaTV Pro (Europe) / Sundtek keeps dropping (freezing) from Openelec and requires a power cycle
« am: März 29, 2015, 01:17:02 Nachmittag »
Hi
Can anyone help me figure out why my Sundtek USB stick keeps dropping from the Openelec system. After a while, the picture freezes and then Tvheadend reports there is no hardware to receive channels, that is the sundtek somehow freezes and needs a reboot. I shutdown the HTPC and remove the USB Stick from USB stick including the DVB-C cable and then it works.
Only rebooting doesn't help.
I have reinstalled Openelec more than 3 times trying newer versions but it's not helping. I've had this problem for more than a year. The freezing happens often. I'm trying KODI now.
Can anyone help me figure out why my Sundtek USB stick keeps dropping from the Openelec system. After a while, the picture freezes and then Tvheadend reports there is no hardware to receive channels, that is the sundtek somehow freezes and needs a reboot. I shutdown the HTPC and remove the USB Stick from USB stick including the DVB-C cable and then it works.
Only rebooting doesn't help.
I have reinstalled Openelec more than 3 times trying newer versions but it's not helping. I've had this problem for more than a year. The freezing happens often. I'm trying KODI now.
11
Sundtek MediaTV Pro (Europe) / Re:MediaTV dvb-c stick, is really a dual tuner?
« am: Januar 04, 2013, 10:46:45 Vormittag »
I see. Can i use two MediaTV stick simultanously to watch two different channels simultanously? Will openelec / xbmc / your drivers allow that?
12
Sundtek MediaTV Pro (Europe) / MediaTV dvb-c stick, is really a dual tuner?
« am: Januar 02, 2013, 02:26:48 Nachmittag »
I managed somehow in some cases to watch two different channels simultanously with my setup.
I use tvheadend as backbone and watched some channels simultanously.
I then use two different xbmc setups with tvheadend clients.
On someother channels i couldn't do it. I got "no subscription".
Is it dual tuner? How can i watch the other channels simultanously?
I use tvheadend as backbone and watched some channels simultanously.
I then use two different xbmc setups with tvheadend clients.
On someother channels i couldn't do it. I got "no subscription".
Is it dual tuner? How can i watch the other channels simultanously?
Seiten: [1]