Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - pucojazu

Seiten: [1]
1
Sundtek MediaTV Pro / Re:Channelscan funktioniert nicht: "====tmbslTDA182I2Reset : Fail"
« am: Dezember 21, 2011, 09:04:39 Nachmittag »
Das funktioniert leider auch nicht.

Außerdem müsste es dann über mediaclient ja gehen, oder?

Code: [Auswählen]
$ /opt/bin/mediaclient -m DVBC -f 113000000 -S 6900000 -M Q64
Using device: /dev/dvb/adapter0/frontend0
Checking for lock:
..........
bzw.
Code: [Auswählen]
$ /opt/bin/mediaclient -m DVBC -f 113000000 -S 6900000 -M Q256
Using device: /dev/dvb/adapter0/frontend0
Checking for lock:
..........
Funktioniert also auch nicht.

Im Log steht dazu:

Code: [Auswählen]
2011-12-21 19:48:53 [16485] Setting Frequency: 113000000
2011-12-21 19:48:53 [16485] Setting Symbolrate: 6900000
2011-12-21 19:48:53 [16485] Setting Modulation: 5
2011-12-21 19:48:53 [16485] ====tmbslTDA182I2Reset : Fail
Was kann ich noch machen?

2
Sundtek MediaTV Pro / Re:Channelscan funktioniert nicht: "====tmbslTDA182I2Reset : Fail"
« am: Dezember 20, 2011, 02:51:02 Nachmittag »
Kann mir niemand helfen?   :(

Ist evtl. der Stick einfach defekt?

3
Sundtek MediaTV Pro / Channelscan funktioniert nicht: "====tmbslTDA182I2Reset : Fail"
« am: Dezember 15, 2011, 03:32:58 Vormittag »
Hallo,

ich habe den Sundtek MediaTV Pro, aber bekomme ihn leider nicht zum Laufen.
Mit der Treiberinstallation scheint alles geklappt zu haben und der Stick wird auch erkannt:

Zitat
2011-12-14 05:15:00 [1811] Starting up Multimedia Framework (Dec  9 2011 00:42:22)
2011-12-14 05:15:00 [1812] Starting service processor (PID 1812)
2011-12-14 05:15:00 [1811] Detected DVB version.h
2011-12-14 05:15:00 [1811] API Version: 5.3
2011-12-14 05:15:00 [1811] Running on Linux (3.1.5-gentoo)
2011-12-14 05:15:00 [1811] Detected: GenuineIntel
2011-12-14 05:15:00 [1811] This CPU supports: MMX and SSE
2011-12-14 05:15:00 [1811] scanning devices
2011-12-14 05:15:00 [1811]
2011-12-14 05:15:00 [1811] Scanning for drivers
2011-12-14 05:15:00 [1811] found lib: libdrv_net.so
2011-12-14 05:15:00 [1811] found lib: libdrv_em28xx.so
2011-12-14 05:15:00 [1811] found lib: libdrv_vivi.so
2011-12-14 05:15:00 [1811]
2011-12-14 05:15:00 [1811] Scanning for plugins
2011-12-14 05:15:00 [1811] *WARNING* could not open plugin path
2011-12-14 05:15:00 [1811]
2011-12-14 05:15:00 [1811] Starting up device manager
2011-12-14 05:15:00 [1811] unable to open /dev/misc
2011-12-14 05:15:00 [1811] scanning devices done
2011-12-14 05:15:00 [1811] attached devices:
2011-12-14 05:15:00 [1811] registering ID: 0
2011-12-14 05:15:00 [1811] disconnecting kernel driver
2011-12-14 05:15:00 [1812] Autostarting scripts in /etc/sundtek/
2011-12-14 05:15:00 [1812] executed all available items
2011-12-14 05:15:01 [1811] Video is set to first transfer option
2011-12-14 05:15:01 [1811] Audio is set to first transfer option
2011-12-14 05:15:01 [1811] DVB is set to second transfer option
2011-12-14 05:15:01 [1811] attaching Videodecoder
2011-12-14 05:15:03 [1811] attaching DVB-T, DVB-C
2011-12-14 05:15:03 [1811] Using second generation demodulator
2011-12-14 05:15:05 [1811] SETTING DVB-C
2011-12-14 05:15:05 [1811] demodulator successfully attached (DVBC)!
2011-12-14 05:15:05 [1811] requesting to attach tuner(s) now
2011-12-14 05:15:05 [1811] This device uses the second generation Tuner
2011-12-14 05:15:05 [1811] registering: adapter0/0
2011-12-14 05:15:05 [1811] registered virtual: /dev/dvb/adapter0/frontend0
2011-12-14 05:15:05 [1811] registered virtual: /dev/dvb/adapter0/demux0
2011-12-14 05:15:05 [1811] registered virtual: /dev/dvb/adapter0/dvr0
2011-12-14 05:15:05 [1811] registered virtual: /dev/video1
2011-12-14 05:15:05 [1811] registered virtual: /dev/radio0
2011-12-14 05:15:05 [1811] registered virtual: /dev/rds0
2011-12-14 05:15:05 [1811] registered virtual: /dev/vbi0
2011-12-14 05:15:05 [1811] Setting RC Protocol to NEC
2011-12-14 05:15:05 [1811] registered virtual: /dev/mediainput0
2011-12-14 05:15:05 [1812] trying to load uinput module
2011-12-14 05:15:05 [1812] loading uinput kernel extention failed, remote control will not work with lirc
2011-12-14 05:15:05 [1811] No remote control support available
2011-12-14 05:15:05 [1811] Registering OSS emulation
2011-12-14 05:15:05 [1811] registered virtual: /dev/dsp0
2011-12-14 05:15:05 [1811]
2011-12-14 05:15:05 [1811] Sundtek MediaTV Driver loaded. This driver is licensed for non-commercial use
2011-12-14 05:15:05 [1811] with Sundtek MediaTV only
2011-12-14 05:15:05 [1811] Driver loaded within 4793 milliseconds
2011-12-14 05:15:05 [1811] Serial(0): U110714105213
2011-12-14 05:15:07 [1811] Initial devicescan done, switching detection mode
2011-12-14 05:17:49 [1482] attaching DVB-T, DVB-C
2011-12-14 05:17:49 [1482] Using second generation demodulator
2011-12-14 05:17:51 [1482] SETTING DVB-C
2011-12-14 05:17:51 [1482] demodulator successfully attached (DVBC)!
2011-12-14 05:17:51 [1482] requesting to attach tuner(s) now
2011-12-14 05:17:51 [1482] This device uses the second generation Tuner
2011-12-14 05:17:51 [1482] registering: adapter0/0
2011-12-14 05:17:51 [1482] registered virtual: /dev/dvb/adapter0/frontend0
2011-12-14 05:17:51 [1482] registered virtual: /dev/dvb/adapter0/demux0
2011-12-14 05:17:51 [1482] registered virtual: /dev/dvb/adapter0/dvr0
2011-12-14 05:17:51 [1482] registered virtual: /dev/video1
2011-12-14 05:17:51 [1482] registered virtual: /dev/radio0
2011-12-14 05:17:51 [1482] registered virtual: /dev/rds0
2011-12-14 05:17:51 [1482] registered virtual: /dev/vbi0
2011-12-14 05:17:51 [1482] Setting RC Protocol to NEC
2011-12-14 05:17:51 [1482] registered virtual: /dev/mediainput0
2011-12-14 05:17:51 [1483] loading uinput kernel extention failed, remote control will not work with lirc
2011-12-14 05:17:51 [1482] No remote control support available
2011-12-14 05:17:51 [1482] Registering OSS emulation
2011-12-14 05:17:51 [1482] registered virtual: /dev/dsp0
2011-12-14 05:17:51 [1482]
2011-12-14 05:17:51 [1482] Sundtek MediaTV Driver loaded. This driver is licensed for non-commercial use
2011-12-14 05:17:51 [1482] with Sundtek MediaTV only
2011-12-14 05:17:51 [1482] Driver loaded within 4793 milliseconds
2011-12-14 05:17:51 [1482] Serial(0): U110714105213
2011-12-14 05:17:53 [1482] Initial devicescan done, switching detection mode
2011-12-14 05:18:06 [1482] Enabling standby

Wenn ich dann versuche, den Adapter mit VLC im DVB-C Modus zu öffnen, woraufhin VLC mit dem Scannen anfängt, steht im Log immer Folgendes:

Zitat
2011-12-15 02:22:28 [1482] SETTING DVB-C
2011-12-15 02:22:28 [1482] Using second datatransfer
2011-12-15 02:22:28 [1482] Setting Frequency: 410000000
2011-12-15 02:22:28 [1482] Setting Symbolrate: 6875000
2011-12-15 02:22:28 [1482] Setting Modulation: 6
2011-12-15 02:22:28 [1482]
2011-12-15 02:22:28 [1482] QAM Auto modulation not supported by device
the driver indicates this option in the capability
flags, please fix your application
2011-12-15 02:22:28 [1482]
2011-12-15 02:22:28 [1482] The driver will now try to probe for Q64/Q128 and Q256
2011-12-15 02:22:28 [1482] Trying QAM 64
2011-12-15 02:22:28 [1482] ====tmbslTDA182I2Reset : Fail
2011-12-15 02:22:31 [1482] Retrying with QAM 128
2011-12-15 02:22:32 [1482] ====tmbslTDA182I2Reset : Fail
2011-12-15 02:22:32 [1482] Retrying with QAM 256
2011-12-15 02:22:33 [1482] ====tmbslTDA182I2Reset : Fail
2011-12-15 02:22:34 [1482] QAM64/128/256 did not lock
2011-12-15 02:22:44 [1482] Setting Frequency: 410000000
2011-12-15 02:22:44 [1482] Setting Symbolrate: 6875000
2011-12-15 02:22:44 [1482] Setting Modulation: 6
2011-12-15 02:22:44 [1482]
2011-12-15 02:22:44 [1482] QAM Auto modulation not supported by device
the driver indicates this option in the capability
flags, please fix your application
2011-12-15 02:22:44 [1482]
2011-12-15 02:22:44 [1482] The driver will now try to probe for Q64/Q128 and Q256
2011-12-15 02:22:44 [1482] Trying QAM 64
2011-12-15 02:22:44 [1482] ====tmbslTDA182I2Reset : Fail
2011-12-15 02:22:47 [1482] Retrying with QAM 128
2011-12-15 02:22:48 [1482] ====tmbslTDA182I2Reset : Fail
2011-12-15 02:22:49 [1482] Retrying with QAM 256
2011-12-15 02:22:49 [1482] ====tmbslTDA182I2Reset : Fail
2011-12-15 02:22:50 [1482] QAM64/128/256 did not lock
2011-12-15 02:23:00 [1482] Setting Frequency: 410000000
2011-12-15 02:23:00 [1482] Setting Symbolrate: 6875000
2011-12-15 02:23:00 [1482] Setting Modulation: 6
2011-12-15 02:23:00 [1482]
2011-12-15 02:23:00 [1482] QAM Auto modulation not supported by device
the driver indicates this option in the capability
flags, please fix your application
2011-12-15 02:23:00 [1482]
2011-12-15 02:23:00 [1482] The driver will now try to probe for Q64/Q128 and Q256
2011-12-15 02:23:00 [1482] Trying QAM 64
2011-12-15 02:23:00 [1482] ====tmbslTDA182I2Reset : Fail
2011-12-15 02:23:03 [1482] Retrying with QAM 128
2011-12-15 02:23:04 [1482] ====tmbslTDA182I2Reset : Fail
2011-12-15 02:23:04 [1482] Retrying with QAM 256
2011-12-15 02:23:05 [1482] ====tmbslTDA182I2Reset : Fail
2011-12-15 02:23:06 [1482] QAM64/128/256 did not lock

VLC bleibt währenddessen beim Scannen hängen, ohne dass etwas passiert.
Woran könnte das liegen bzw. was kann ich da machen?

Seiten: [1]