Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - MarkusEh

Seiten: [1] 2 3
1
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Restart automatisieren?
« am: August 19, 2022, 11:26:12 Vormittag »
> Wird dort ein Diseqc Switch verwendet?
Ja, ein aktiver Switch

> Was für ein Tuner ist das?
Sundtek SkyTV Dual 2x

2
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Restart automatisieren?
« am: August 15, 2022, 11:17:46 Vormittag »
Hallo,

Ich habe ein 24/7 System (rpi4).
Immer wieder gibt es Empfangsprobleme, die sich durch einen Restart lösen lassen.
Kann man das automatisieren?
Also automatisiert erkennen, dass etwas nicht geht, und dann restarten?

Code: [Auswählen]
markus@rpi4s:/usr/local/src/vdr-plugin-live $ /opt/bin/mediaclient --testastra -d /dev/dvb/adapter1/frontend0
Testing Astra 19.2 Frequencies
DVBS
LO Band / 18V:
Checking for lock:
..........
LO Band / 13V:
Checking for lock:
. [LOCKED]
HI Band / 18V:
Checking for lock:                                                                                                                        ..........
HI Band / 13V:
Checking for lock:
..........
DVB-S2 ZDF HD / 18V
Checking for lock:
..........
markus@rpi4s:/usr/local/src/vdr-plugin-live $ sudo systemctl stop vdr
markus@rpi4s:/usr/local/src/vdr-plugin-live $ sudo killall mediasrv
markus@rpi4s:/usr/local/src/vdr-plugin-live $ sudo /opt/bin/mediaclient --start
markus@rpi4s:/usr/local/src/vdr-plugin-live $ /opt/bin/mediaclient --testastra -d /dev/dvb/adapter1/frontend0
Testing Astra 19.2 Frequencies
DVBS
LO Band / 18V:
Checking for lock:
. [LOCKED]
LO Band / 13V:
Checking for lock:
. [LOCKED]
HI Band / 18V:
Checking for lock:
. [LOCKED]
HI Band / 13V:
Checking for lock:
.. [LOCKED]
DVB-S2 ZDF HD / 18V
Checking for lock:
. [LOCKED]

Man sieht klar, dass vor dem Restart von mediasrv viele Locks fehlen. Die nach dem Restart sofort kommen.

~ Markus


3
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Probleme nach Update auf Raspi 4 (SkyTV Ultimate 5+6)
« am: Juni 20, 2021, 03:03:39 Nachmittag »
Hi,

Ich habe VDR, und verwende den nur als Server / für Aufzeichnungen.
RPI4, Raspberry Pi OS 64bit,
Linux rpi4s 5.10.17-v8+ #1414 SMP PREEMPT Fri Apr 30 13:23:25 BST 2021 aarch64 GNU/Linux
Sundtek Treiber: Build date: 2021-04-07 17:23:08

Funktioniert bei mir so weit. Nur der Netzwerksupport des Sundtek Treiber funktioniert nicht :( .

~Markus


4
{Single, Dual, Quad} Sundtek SkyTV Ultimate / vdr[75260]: double free or corruption (out)
« am: Juni 14, 2021, 07:13:21 Nachmittag »
Hallo,

vdr stürzt ab, mit der Meldung "vdr[75260]: double free or corruption (out)".
Mediaclient -e:
Zitat
**** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate II (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 2-3
  [SERIAL]:
     ID: U110927104102
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

device 1: [Sundtek SkyTV Ultimate II (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 2-6
  [SERIAL]:
     ID: U110927104037
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput1

backtrace:
Zitat


#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50

set = {__val = {0, 80, 4, 94792703908451, 140632690873040, 4, 4, 7904, 140632933895072, 140633426445392, 8, 140633703069807, 94792703906928, 8, 7307199742750123385, 140633426445392}}

pid = <optimized out>

tid = <optimized out>

#1 0x00007fe7d5e80859 in __GI_abort () at abort.c:79

save_stage = 1

act =

{__sigaction_handler = {sa_handler = 0x62696c2f7273752f, sa_sigaction = 0x62696c2f7273752f}, sa_mask = {__val = {31, 31, 7904, 140632933894856, 140633426445392, 8, 140633703069807, 94792703906928, 8, 140633704570923, 140633426445392, 140632933894608, 0, 62, 140632690964048, 140633426444800}}, sa_flags = 62, sa_restorer = 0x3e}

sigs = {__val = {32, 0 <repeats 15 times>}}

#2 0x00007fe7d5eeb3ee in __libc_message (action=action@entry=do_abort, fmt=fmt@entry=0x7fe7d6015285 "%s\n") at ../sysdeps/posix/libc_fatal.c:155

ap = {{gp_offset = 24, fp_offset = 0, overflow_arg_area = 0x7fe7c56d4320, reg_save_area = 0x7fe7c56d42b0}}

fd = <optimized out>

list = <optimized out>

nlist = <optimized out>

cp = <optimized out>

#3 0x00007fe7d5ef347c in malloc_printerr (str=str@entry=0x7fe7d6017670 "double free or corruption (out)") at malloc.c:5347

#4 0x00007fe7d5ef5120 in _int_free (av=0x7fe7d6046b80 <main_arena>, p=0x7fe7a80e85b0, have_lock=<optimized out>) at malloc.c:4314

size = 384

fb = <optimized out>

nextchunk = 0x7fe7a80e8730

nextsize = <optimized out>

nextinuse = <optimized out>

prevsize = <optimized out>

bck = <optimized out>

fwd = <optimized out>

__PRETTY_FUNCTION__ = "_int_free"

#5 0x00007fe7d662b1e9 in () at /opt/lib/libmediaclient.so

#6 0x00007fe7d66233cd in close () at /opt/lib/libmediaclient.so

#7 0x00005636a56e6651 in cSectionHandler::Del(cFilterData const*) (this=0x5636a639d610, FilterData=FilterData@entry=0x7fe799ba22c0) at sections.c:108

fh = 0x7fe79bca04b0

#8 0x00005636a5690650 in cFilter::Del(unsigned short, unsigned char, unsigned char) (this=this@entry=0x5636a63a6330, Pid=<optimized out>, Tid=Tid@entry=2 '\002', Mask=Mask@entry=255 '\377')

at filter.c:229

fd = 0x7fe799ba22c0

#9 0x00005636a56cd3d7 in cPatFilter::SwitchToNextPmtPid() (this=this@entry=0x5636a63a6330) at pat.c:410

#10 0x00005636a56cebe9 in cPatFilter::Process(unsigned short, unsigned char, unsigned char const*, int)

(this=0x5636a63a6330, Pid=<optimized out>, Tid=<optimized out>, Data=0x7fe7c56d4dc0 "\002\260;n\322\301", Length=<optimized out>) at pat.c:479

pmt =

{<SI::NumberedSection> = {<SI::CRCSection> = {<SI::Section> = {<SI::Object> = {<SI::Parsable> = {_vptr.Parsable = 0x5636a5798bb0 <vtable for SI::PMT+16>, parsed = true}, data = {data_ = 0x7fe799c63f80, off = 0}}, <No data fields>}, <No data fields>}, <No data fields>}, commonDescriptors = {<SI::Loop> = {<SI::VariableLengthPart> = {<SI::Object> = {<SI::Parsable> = {_vptr.Parsable = 0x5636a57927d0 <vtable for SI::DescriptorLoop+16>, parsed = false}, data = {data_ = 0x7fe799c63f80, off = 12}}, length = 0}, <No data fields>}, domain = SI::SI}, streamLoop = {<SI::Loop> = {<SI::VariableLengthPart> = {<SI::Object> = {<SI::Parsable> = {_vptr.Parsable = 0x5636a57958c0 <vtable for SI::StructureLoop<SI::PMT::Stream>+16>, parsed = false}, data = {data_ = 0x7fe799c63f80, off = 12}}, length = 46}, <No data fields>}, <No data fields>}, s = 0x7fe7c56d4dc0}

StateKey = {stateLock = 0x3d600010000, write = 100, state = 0, timedOut = 240}

Channels = <optimized out>

Channel = <optimized out>

ChannelsModified = <optimized out>

MutexLock = {mutex = 0x5636a63a63e8, locked = true}

#11 0x00005636a56e6b56 in cSectionHandler::Action() (this=0x5636a639d610) at sections.c:211

fi = 0x5636a63a6330

pid = 330

tid = 2

len = 62

buf = "\002\260;n\322\301\000\000\341K\360\000$\341K\360\003R\001\037\021\341L\360\tR\001 \n\004deu\000\021\341M\360\tR\001!\n\004deu\000\005\341R\360\005o\003\000\020\340BC,\270\005Die besten Zoogeschichten aus NRWi\003\373\062\031P\016\365\v\tdeuHD-VideoP\f\362\003\002deustereoP\033\362\003\004deuohne AudiodeskriptionP\027\364B\021deuDolby Digital 2.0P\031\363 \006deuohne DV"...

r = <optimized out>

fh = <optimized out>

ThreadLock = {thread = 0x5636a639d610, locked = true}

i = <optimized out>

DeviceHasLock = true

NumFilters = <optimized out>

pfd = <optimized out>

oldStatusCount = 6031

#12 0x00005636a570fde5 in cThread::StartThread(cThread*) (Thread=0x5636a639d610) at thread.c:301
#13 0x00007fe7d6567609 in start_thread (arg=<optimized out>) at pthread_create.c:477

ret = <optimized out>

pd = <optimized out>

unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140633426454272, -2587623203588688243, 140732040950878, 140732040950879, 140732040950880, 140633426452224, 2583202227297040013, 2583173699283433101}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}

not_first_call = 0

#14 0x00007fe7d5f7d293 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95

5
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Netzwerk, kein Empfang am client
« am: Mai 24, 2021, 06:46:33 Nachmittag »
Hallo,

Am Server, rpi:
Zitat
$ /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [             Dual S2]  DVB-S/S2, REMOTE-CONTROL, DVB-S/S2
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 1-1.4.4.2
  [SERIAL]:
     ID: U201009190655
  [DVB-S/S2]:
     FESTATUS: STANDBY
     LNBVOLTAGE: DISABLED
     LNBSUPPLY: USBPOWER
     LNBSTATUS: OK
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0

Das funktioniert so weit, und VDR am Server kann damit auch Sendungen aufnehmen.
Am client:
Zitat
$ /opt/bin/mediaclient --mount 192.168.x.x
Successfully mounted: 192.168.x.x
$ mediaclient -e
*** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate II (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 2-3
  [SERIAL]:
     ID: U110927104102
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

device 1: [Sundtek SkyTV Ultimate II (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 2-6
  [SERIAL]:
     ID: U110927104037
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput1

device 2: [    (192.168.x.x)]  DVB-S/S2, NETWORK-DEVICE, DVB-S/S2
  [INFO]:
     STATUS: STANDBY
  [NETWORKPATH]:
     PATH: 192.168.x.x
  [SERIAL]:
     ID: U201009190655
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter2/frontend0
     DVR: /dev/dvb/adapter2/dvr0
     DMX: /dev/dvb/adapter2/demux0
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter3/frontend0
     DVR: /dev/dvb/adapter3/dvr0
     DMX: /dev/dvb/adapter3/demux0
Sieht eigentlich gut aus. Wenn ich dann VDR am Client mit /dev/dvb/adapter2/frontend0 laufen lasse, bekomme ich kein Bild.
VDR mit /dev/dvb/adapter0/frontend0 zeigt ein Bild.

~ Markus

6
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: mediasrv: page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP)
« am: Dezember 12, 2020, 11:54:02 Vormittag »
Hi,

Ich habe die Sticks jetzt auf meinem anderen Rechner, mit ubuntu focal.
/opt/bin/mediaclient -e
Zitat
**** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate II (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 2-3
  [SERIAL]:
     ID: U110927104102
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

device 1: [Sundtek SkyTV Ultimate II (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 2-6
  [SERIAL]:
     ID: U110927104037
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput1

Einen Testtreiber würde ich ausprobieren.

~ Markus

7
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Ken Empfang mehr
« am: Dezember 08, 2020, 10:26:24 Nachmittag »
Jetzt bin ich aber echt verwundert.
Die Tests sehen alle gut aus:
/opt/bin/mediaclient --testastra -d /dev/dvb/adapter0/frontend0
/opt/bin/mediaclient --tsscan /dev/dvb/adapter0/dvr0
Zitat
media scan tp: 0
** NO GROUP GIVEN **
** NO GROUP GIVEN **
PMT PID: 0x17d4
  Program Number: 0x2b66
  TransportstreamID: 1011
  Encrypted: No
  Service type: 19
  Service running: Yes
  Provider Name: ZDFvision
  Service Name: ZDF HD
    --> 0x17de (27)
    --> 0x17e8 (ISO/IEC 11172 Audio)
    --> 0x17e9 (ISO/IEC 11172 Audio)
    --> 0x17ea (ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data)
    --> 0x17eb (ISO/IEC 11172 Audio)
    --> 0x17f2 (ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data)
    --> 0x17f3 (ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data)
    --> 0x17f4 (ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data)
    --> 0x181a (ITU-T Rec. H.222.0 | ISO/IEC 13818-1 private_sections)
PMT PID: 0x189c
  Program Number: 0x2b7a
  TransportstreamID: 1011
  Encrypted: No
  Service type: 19
  Service running: Yes
  Provider Name: ZDFvision
  Service Name: zdf_neo HD
    --> 0x18a6 (27)
    --> 0x18b0 (ISO/IEC 11172 Audio)
    --> 0x18b1 (ISO/IEC 11172 Audio)
    --> 0x18b2 (ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data)
    --> 0x18b3 (ISO/IEC 11172 Audio)
    --> 0x18ba (ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data)
    --> 0x18bb (ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data)
    --> 0x18e2 (ITU-T Rec. H.222.0 | ISO/IEC 13818-1 private_sections)
Total found: 2 PMTs (incl. unknown 0x0000)
Scan finished after 7 packets (1316 bytes)
/opt/bin/mediaclient --readsignal=10 -d /dev/dvb/adapter0/frontend0
Zitat
== reading digital TV signal ==
SIGNAL: [..............................   ] ( 92%) SATQUALITY:  83%  SNR:  14  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 92%) SATQUALITY:  83%  SNR:  14  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 92%) SATQUALITY:  83%  SNR:  14  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 92%) SATQUALITY:  83%  SNR:  14  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 92%) SATQUALITY:  83%  SNR:  14  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 92%) SATQUALITY:  83%  SNR:  14  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 92%) SATQUALITY:  83%  SNR:  14  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 92%) SATQUALITY:  83%  SNR:  14  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 92%) SATQUALITY:  83%  SNR:  14  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 92%) SATQUALITY:  83%  SNR:  14  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
/opt/bin/mediaclient --testastra -d /dev/dvb/adapter1/frontend0
/opt/bin/mediaclient --tsscan /dev/dvb/adapter1/dvr0
/opt/bin/mediaclient --readsignal=10 -d /dev/dvb/adapter1/frontend0
Zitat
== reading digital TV signal ==
SIGNAL: [...............................  ] ( 93%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [...............................  ] ( 93%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [...............................  ] ( 93%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [...............................  ] ( 93%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [...............................  ] ( 93%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [...............................  ] ( 93%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [...............................  ] ( 93%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [...............................  ] ( 93%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [...............................  ] ( 93%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [...............................  ] ( 93%) SATQUALITY:  80%  SNR:  13  BER:      0 FREQ: 1612000    Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF

Sieht eigentlich alles gut aus. Ich denke, es liegt wohl am VDR.

Danke für die Hilfe!

~ Markus

8
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Ken Empfang mehr
« am: Dezember 08, 2020, 07:25:21 Nachmittag »
Hi,

ich habe "/opt/bin/mediaclient -m DVBS -f 12400000 -M 8PSK -S 27500000 -E 2/3 -V V :" von hier http://sundtek.de/wiki/index.php?title=Mediaclient#DVB-S.2FS2.2FS2X_Tuning kopiert. Ich hatte angenommen, dass auf Eurem Wiki ein Beispiel mit sinnvollen Parametern steht.

Ich habe den Test mit 2 Terminals gemacht:
./mediasrv -v :
Zitat
2020-12-08 18:09:14 [9415] UID: 0 SUID 0
2020-12-08 18:09:14 [9415] Alsa Blocking on (default)
2020-12-08 18:09:14 [9415] Starting up Multimedia Framework (Oct  9 2020 10:08:02)
2020-12-08 18:09:14 [9415] Semaphore exists, removing and reallocating it
2020-12-08 18:09:14 [9415] Detected DVB version.h
2020-12-08 18:09:14 [9416] Starting service processor (PID 9416)
2020-12-08 18:09:14 [9415] API Version: 5.11
2020-12-08 18:09:14 [9415] Running on Linux (5.4.72-v8+)
2020-12-08 18:09:14 [9415] scanning devices
2020-12-08 18:09:14 [9415] scanning for drivers
2020-12-08 18:09:14 [9415] scanning for plugins
2020-12-08 18:09:14 [9415] Starting up device manager
2020-12-08 18:09:14 [9415] scanning devices done
2020-12-08 18:09:14 [9415] attached devices:
2020-12-08 18:09:14 [9416] Autostarting scripts in /etc/sundtek/
2020-12-08 18:09:14 [9416] executed all available items
2020-12-08 18:09:14 [9415] registering ID: 0
2020-12-08 18:09:14 [9415] Infrared Control Support is disabled in configuration file
2020-12-08 18:09:14 [9415] Memory mapped transfers are not available
2020-12-08 18:09:14 [9415] Board config found: Sundtek SkyTV Dual 8 (eLight)
2020-12-08 18:09:14 [9415] This board provides 2 frontends
2020-12-08 18:09:14 [9415]
2020-12-08 18:09:14 [9415] *********
2020-12-08 18:09:14 [9415] Signature: Sundtek
2020-12-08 18:09:14 [9415] Initializing SYSV-IPC
2020-12-08 18:09:14 [9415] Allocation using pg for type 65678
2020-12-08 18:09:15 [9415] demodulator successfully attached (DVB_S/S2)!
2020-12-08 18:09:15 [9415] attaching second tuner...
2020-12-08 18:09:15 [9415] Allocation using pg for type 65678
2020-12-08 18:09:16 [9415] demodulator successfully attached (DVB_S/S2)!
2020-12-08 18:09:16 [9415] Configuring Dual LNB Power Supply
2020-12-08 18:09:16 [9415] Vertical Polarisation is set to 14.00 Volt
2020-12-08 18:09:16 [9415] Horizontal Polarisation is set to 19.10 Volt
2020-12-08 18:09:16 [9415] Enabling LNB status monitor
2020-12-08 18:09:17 [9415] Using Sundtek remote control layout
2020-12-08 18:09:17 [9415]
2020-12-08 18:09:17 [9415] IR Setup
.... ir disabled
2020-12-08 18:09:17 [9415] registered virtual: /dev/mediainput0
2020-12-08 18:09:17 [9415] registering: adapter0/0
2020-12-08 18:09:17 [9415] registered virtual: /dev/dvb/adapter0/frontend0
2020-12-08 18:09:17 [9415] registered virtual: /dev/dvb/adapter0/demux0
2020-12-08 18:09:17 [9415] registered virtual: /dev/dvb/adapter0/dvr0
2020-12-08 18:09:17 [9415] registering: adapter1/0
2020-12-08 18:09:17 [9415] registered virtual: /dev/dvb/adapter1/frontend0
2020-12-08 18:09:17 [9415] registered virtual: /dev/dvb/adapter1/demux0
2020-12-08 18:09:17 [9415] registered virtual: /dev/dvb/adapter1/dvr0
2020-12-08 18:09:17 [9415] Driver loaded within 2730 milliseconds
2020-12-08 18:09:21 [9415] Initial devicescan done, switching detection mode
2020-12-08 18:09:32 [9415] Enabling Standby
2020-12-08 18:09:34 [9415] Waking up from standby
2020-12-08 18:09:34 [9415] Set Voltage 18V
2020-12-08 18:09:34 [9415] Disabling High Tone (22khz)
2020-12-08 18:09:34 [9415] Setting Frequency: 994000
2020-12-08 18:09:34 [9415] Setting DVB-S
2020-12-08 18:09:34 [9415] Frequency: 994
2020-12-08 18:09:34 [9415] Symbolrate: 22000
2020-12-08 18:09:34 [9415] Frontend has locked
2020-12-08 18:09:34 [9415] Set Voltage 13V
2020-12-08 18:09:34 [9415] Disabling High Tone (22khz)
2020-12-08 18:09:34 [9415] Setting Frequency: 1788000
2020-12-08 18:09:34 [9415] Setting DVB-S
2020-12-08 18:09:34 [9415] Frequency: 1788
2020-12-08 18:09:34 [9415] Symbolrate: 22000
2020-12-08 18:09:35 [9415] Frontend has locked
2020-12-08 18:09:35 [9415] Set Voltage 18V
2020-12-08 18:09:35 [9415] Enabling High Tone (22khz)
2020-12-08 18:09:35 [9415] Setting Frequency: 2004000
2020-12-08 18:09:35 [9415] Setting DVB-S
2020-12-08 18:09:35 [9415] Frequency: 2004
2020-12-08 18:09:35 [9415] Symbolrate: 22000
2020-12-08 18:09:35 [9415] Frontend has locked
2020-12-08 18:09:35 [9415] Set Voltage 13V
2020-12-08 18:09:35 [9415] Enabling High Tone (22khz)
2020-12-08 18:09:35 [9415] Setting Frequency: 1952000
2020-12-08 18:09:35 [9415] Setting DVB-S
2020-12-08 18:09:35 [9415] Frequency: 1952
2020-12-08 18:09:35 [9415] Symbolrate: 22000
2020-12-08 18:09:36 [9415] Frontend has locked
2020-12-08 18:09:36 [9415] Set Voltage 18V
2020-12-08 18:09:36 [9415] Disabling High Tone (22khz)
2020-12-08 18:09:36 [9415] Setting Frequency: 1612000
2020-12-08 18:09:36 [9415] Setting DVB-S2
2020-12-08 18:09:36 [9415] Frequency: 1612
2020-12-08 18:09:36 [9415] Symbolrate: 22000
2020-12-08 18:09:36 [9415] Frontend has locked
2020-12-08 18:09:51 [9415] Enabling Standby
2020-12-08 18:10:14 [9415] Waking up from standby
2020-12-08 18:10:14 [9415] Set Voltage 13V
2020-12-08 18:10:14 [9415] Disabling High Tone (22khz)
2020-12-08 18:13:17 [9415] Set Voltage 18V
2020-12-08 18:13:17 [9415] Disabling High Tone (22khz)

/opt/bin/mediaclient --testastra -d /dev/dvb/adapter0/frontend0:
Zitat
Testing Astra 19.2 Frequencies
DVBS
LO Band / 18V:
Checking for lock:
.. [LOCKED]
LO Band / 13V:
Checking for lock:
. [LOCKED]
HI Band / 18V:
Checking for lock:
.. [LOCKED]
HI Band / 13V:
Checking for lock:
.. [LOCKED]
DVB-S2 ZDF HD / 18V
Checking for lock:
. [LOCKED]
/opt/bin/mediaclient --blindscan /dev/dvb/adapter0/frontend0
Zitat
Succeeded this device supports Hardware Blindscan
DVB-S2 blindscan request
Scanning 13V Lowband
MODE: DVB-S2 FREQUENCY(MHz): 10730 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 10788 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 10847 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 10906 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 10936 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 10979 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 11038 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 11068 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11127 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 11186 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11230 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11259 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 11318 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11377 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11436 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 11509 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11568 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 11627 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 11686 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11778 SYMBOL_RATE: 29499000 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11817 SYMBOL_RATE: 29701000 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
DVB-S2 blindscan request
Scanning 18V Lowband
MODE: DVB-S2 FREQUENCY(MHz): 10714 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 10744 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 10803 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 10862 SYMBOL_RATE: 23500000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 10920 SYMBOL_RATE: 21999000 MODULATION: QPSK VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 10965 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 10994 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11053 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11112 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11171 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11214 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11273 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11303 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11362 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 11392 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 18V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 11421 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11465 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11494 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11553 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11582 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 11612 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11671 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11720 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11759 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 18V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 11798 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 18V TONE: OFF
MODE: DVB-S  FREQUENCY(MHz): 11837 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 18V TONE: OFF
DVB-S2 blindscan request
Scanning 13V Highband
MODE: DVB-S  FREQUENCY(MHz): 11538 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: ON
MODE: DVB-S  FREQUENCY(MHz): 11597 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11656 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S  FREQUENCY(MHz): 11685 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11778 SYMBOL_RATE: 29500000 MODULATION: QPSK VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11817 SYMBOL_RATE: 29701000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11856 SYMBOL_RATE: 29701000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11895 SYMBOL_RATE: 29701000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11933 SYMBOL_RATE: 29700000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S  FREQUENCY(MHz): 11972 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 12011 SYMBOL_RATE: 29701000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S  FREQUENCY(MHz): 12051 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 12090 SYMBOL_RATE: 29701000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 12129 SYMBOL_RATE: 29701000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 12168 SYMBOL_RATE: 29701000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 12207 SYMBOL_RATE: 29701000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 12246 SYMBOL_RATE: 29700000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 12285 SYMBOL_RATE: 29701000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 12324 SYMBOL_RATE: 29699000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S  FREQUENCY(MHz): 12363 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 12402 SYMBOL_RATE: 29701000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 12441 SYMBOL_RATE: 29701000 MODULATION: PSK8 VOLTAGE: 13V TONE: ON
MODE: DVB-S  FREQUENCY(MHz): 12480 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 13V TONE: ON
MODE: DVB-S  FREQUENCY(MHz): 12551 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 13V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 12669 SYMBOL_RATE: 23500000 MODULATION: QPSK VOLTAGE: 13V TONE: ON
DVB-S2 blindscan request
Scanning 18V Highband
MODE: DVB-S2 FREQUENCY(MHz): 11552 SYMBOL_RATE: 22000000 MODULATION: PSK8 VOLTAGE: 18V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11582 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 18V TONE: ON
MODE: DVB-S  FREQUENCY(MHz): 11612 SYMBOL_RATE: 22000000 MODULATION: QPSK VOLTAGE: 18V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11670 SYMBOL_RATE: 21999000 MODULATION: PSK8 VOLTAGE: 18V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11720 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 18V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11758 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 18V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11797 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 18V TONE: ON
MODE: DVB-S  FREQUENCY(MHz): 11836 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 18V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11875 SYMBOL_RATE: 27500000 MODULATION: PSK8 VOLTAGE: 18V TONE: ON
MODE: DVB-S2 FREQUENCY(MHz): 11914 SYMBOL_RATE: 27500000 MODULATION: QPSK VOLTAGE: 18V TONE: ON
MODE: DVB-S  FREQUENCY(MHz): 11953 SYMBOL_RATE: 27501000 MODULATION: QPSK VOLTAGE: 18V TONE: ON
^C

~ Markus


9
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Kein Empfang mehr
« am: Dezember 07, 2020, 10:50:28 Nachmittag »
Hallo,

Ich habe Sundtek SkyTV Dual 2x (DVB-S/S2/S2X) . Hat bisher super funktioniert. Aber jetzt:

mediaclient -e:
Zitat
**** List of Media Hardware Devices ****
device 0: [             Dual S2]  DVB-S/S2, REMOTE-CONTROL, DVB-S/S2
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 1-1.4.4.2
  [SERIAL]:
     ID: U201009190655
  [DVB-S/S2]:
     FESTATUS: ACTIVE
     LNBVOLTAGE: DISABLED
     LNBSUPPLY: USBPOWER
     LNBSTATUS: OK
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
VDR erkennt den Stick auch, kann aber nichts empfangen.
/opt/bin/mediaclient -m DVBS -f 12400000 -M 8PSK -S 27500000 -E 2/3 -V V :
Zitat
Using device: /dev/dvb/adapter0/frontend0
Setting DVB-S/S2 tune Parameters
using HI/LO Band frequency: 12400000
Modulation: PSK8 (DVB-S2)
Symbolrate: 27500000
Voltage: 13 Volt (Vertical)
FEC: 2/3
Tone ON
Frequency: 1800000
Syntax OK
Checking for lock:
..........
/opt/bin/mediaclient --readsignal=0 -d /dev/dvb/adapter0/frontend0
Zitat
== reading digital TV signal ==
SIGNAL: [                                 ] (  0%) SATQUALITY:   0%  SNR:   0  BER:      0 FREQ: 1800000    Hz LOCKED:  NO SYS: DVB-S SYM: 27500000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: V(13V) TONE: ON
SIGNAL: [                                 ] (  0%) SATQUALITY:   0%  SNR:   0  BER:      0 FREQ: 1800000    Hz LOCKED:  NO SYS: DVB-S SYM: 27500000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: V(13V) TONE: ON
SIGNAL: [                                 ] (  0%) SATQUALITY:   0%  SNR:   0  BER:      0 FREQ: 1800000    Hz LOCKED:  NO SYS: DVB-S SYM: 27500000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: V(13V) TONE: ON
...
Das läuft am rpi4s.
Ich habe den rpi restartet, den Stick ausgesteckt, stromlos gemacht und wieder eingesteckt. Hat nichts geholfen.
Auf meinem anderer Rechner (mit einem anderen Empfänger) funktioniert der Empfang prima.

Ich vermute, dass der Empfänger defekt ist.

~Markus


[Update Sundtek]:
Titel aktualisiert

10
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: mediasrv: page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP)
« am: Dezember 07, 2020, 09:29:02 Nachmittag »
Hi,

Ich habe jetzt den Sundtek SkyTV Dual 2x (DVB-S/S2/S2X) gekauft, die ca. 9 Jahre alten Sticks haben zu viele Probleme gemacht.
Damit ist dieser Fehler nicht mehr aufgetreten.

~Markus

11
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: mediasrv: page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP)
« am: November 03, 2020, 07:07:23 Nachmittag »
Hallo,

Hier mal die Log Einträge:
Code: [Auswählen]
Oct 30 22:23:00 rpi4s kernel: [543176.528745] mediasrv: page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
Oct 30 22:23:00 rpi4s kernel: [543176.528764] CPU: 1 PID: 20689 Comm: mediasrv Tainted: G         C        5.4.51-v8+ #1333
Oct 30 22:23:00 rpi4s kernel: [543176.528766] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
Oct 30 22:23:00 rpi4s kernel: [543176.528769] Call trace:
Oct 30 22:23:00 rpi4s kernel: [543176.528779]  dump_backtrace+0x0/0x150
Oct 30 22:23:00 rpi4s kernel: [543176.528782]  show_stack+0x24/0x30
Oct 30 22:23:00 rpi4s kernel: [543176.528787]  dump_stack+0xd8/0x13c
Oct 30 22:23:00 rpi4s kernel: [543176.528792]  warn_alloc+0xf4/0x158
Oct 30 22:23:00 rpi4s kernel: [543176.528796]  __alloc_pages_slowpath+0xc70/0xcc8
Oct 30 22:23:00 rpi4s kernel: [543176.528799]  __alloc_pages_nodemask+0x2b8/0x338
Oct 30 22:23:00 rpi4s kernel: [543176.528804]  kmalloc_order+0x30/0x90
Oct 30 22:23:00 rpi4s kernel: [543176.528807]  kmalloc_order_trace+0x3c/0x128
Oct 30 22:23:00 rpi4s kernel: [543176.528812]  __kmalloc+0x328/0x3a0
Oct 30 22:23:00 rpi4s kernel: [543176.528818]  proc_do_submiturb+0xcbc/0xe28
Oct 30 22:23:00 rpi4s kernel: [543176.528822]  usbdev_do_ioctl+0x1228/0x1af0
Oct 30 22:23:00 rpi4s kernel: [543176.528825]  usbdev_ioctl+0x34/0x48
Oct 30 22:23:00 rpi4s kernel: [543176.528831]  do_vfs_ioctl+0xc8/0xa08
Oct 30 22:23:00 rpi4s kernel: [543176.528835]  ksys_ioctl+0x50/0x80
Oct 30 22:23:00 rpi4s kernel: [543176.528839]  __arm64_sys_ioctl+0x28/0x38
Oct 30 22:23:00 rpi4s kernel: [543176.528843]  el0_svc_common.constprop.1+0xe0/0x1a8
Oct 30 22:23:00 rpi4s kernel: [543176.528847]  el0_svc_handler+0x34/0xa0
Oct 30 22:23:00 rpi4s kernel: [543176.528851]  el0_svc+0x8/0xc
Oct 30 22:23:00 rpi4s kernel: [543176.528854] Mem-Info:
Oct 30 22:23:00 rpi4s kernel: [543176.528863] active_anon:23250 inactive_anon:64746 isolated_anon:0
Oct 30 22:23:00 rpi4s kernel: [543176.528863]  active_file:449504 inactive_file:1377208 isolated_file:0
Oct 30 22:23:00 rpi4s kernel: [543176.528863]  unevictable:4 dirty:6585 writeback:0 unstable:0
Oct 30 22:23:00 rpi4s kernel: [543176.528863]  slab_reclaimable:33240 slab_unreclaimable:8987
Oct 30 22:23:00 rpi4s kernel: [543176.528863]  mapped:15529 shmem:2416 pagetables:785 bounce:0
Oct 30 22:23:00 rpi4s kernel: [543176.528863]  free:22390 free_pcp:1410 free_cma:2301
Oct 30 22:23:00 rpi4s kernel: [543176.528871] Node 0 active_anon:93000kB inactive_anon:258984kB active_file:1798016kB inactive_file:5508832kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:62116kB dirty:26340kB writeback:0kB shmem:9664kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no
Oct 30 22:23:00 rpi4s kernel: [543176.528879] DMA free:32680kB min:1820kB low:2708kB high:3596kB active_anon:2640kB inactive_anon:33448kB active_file:521064kB inactive_file:276448kB unevictable:0kB writepending:44kB present:970752kB managed:889928kB mlocked:0kB kernel_stack:32kB pagetables:248kB bounce:0kB free_pcp:1464kB local_pcp:740kB free_cma:9204kB
Oct 30 22:23:00 rpi4s kernel: [543176.528882] lowmem_reserve[]: 0 3008 6947 6947
Oct 30 22:23:00 rpi4s kernel: [543176.528895] DMA32 free:31712kB min:25000kB low:28080kB high:31160kB active_anon:49076kB inactive_anon:68052kB active_file:713320kB inactive_file:2153960kB unevictable:0kB writepending:1328kB present:3080192kB managed:3080192kB mlocked:0kB kernel_stack:144kB pagetables:204kB bounce:0kB free_pcp:1580kB local_pcp:648kB free_cma:0kB
Oct 30 22:23:00 rpi4s kernel: [543176.528898] lowmem_reserve[]: 0 0 3939 3939
Oct 30 22:23:00 rpi4s kernel: [543176.528911] Normal free:25168kB min:32736kB low:36768kB high:40800kB active_anon:41284kB inactive_anon:157484kB active_file:563632kB inactive_file:3079008kB unevictable:16kB writepending:24968kB present:4194304kB managed:4033672kB mlocked:16kB kernel_stack:2944kB pagetables:2688kB bounce:0kB free_pcp:2724kB local_pcp:1372kB free_cma:0kB
Oct 30 22:23:00 rpi4s kernel: [543176.528914] lowmem_reserve[]: 0 0 0 0
Oct 30 22:23:00 rpi4s kernel: [543176.528922] DMA: 999*4kB (UMEC) 370*8kB (UMEC) 351*16kB (UMEC) 182*32kB (UME) 50*64kB (UE) 15*128kB (UM) 5*256kB (U) 2*512kB (ME) 1*1024kB (C) 1*2048kB (C) 1*4096kB (C) = 32988kB
Oct 30 22:23:00 rpi4s kernel: [543176.528955] DMA32: 116*4kB (ME) 161*8kB (E) 645*16kB (UE) 378*32kB (UE) 118*64kB (UE) 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 31720kB
Oct 30 22:23:00 rpi4s kernel: [543176.528979] Normal: 121*4kB (UM) 163*8kB (UME) 511*16kB (UME) 224*32kB (UME) 105*64kB (UME) 8*128kB (UM) 3*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 25644kB
Oct 30 22:23:00 rpi4s kernel: [543176.529006] 1829221 total pagecache pages
Oct 30 22:23:00 rpi4s kernel: [543176.529011] 174 pages in swap cache
Oct 30 22:23:00 rpi4s kernel: [543176.529015] Swap cache stats: add 1264, delete 1090, find 1478/1565
Oct 30 22:23:00 rpi4s kernel: [543176.529018] Free swap  = 97532kB
Oct 30 22:23:00 rpi4s kernel: [543176.529021] Total swap = 102396kB
Oct 30 22:23:00 rpi4s kernel: [543176.529024] 2061312 pages RAM
Oct 30 22:23:00 rpi4s kernel: [543176.529027] 0 pages HighMem/MovableOnly
Oct 30 22:23:00 rpi4s kernel: [543176.529031] 60364 pages reserved
Oct 30 22:23:00 rpi4s kernel: [543176.529034] 65536 pages cma reserved

12
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: mediasrv: page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP)
« am: Oktober 03, 2020, 05:17:57 Nachmittag »
Ich verwende ältere USB Sticks.

> Hast Du dazu mehr Informationen
Welche Informationen braucht ihr?

13
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Probleme nach Update auf Raspi 4 (SkyTV Ultimate 5+6)
« am: September 22, 2020, 08:36:16 Vormittag »
Hallo Killi,

Ich denke nicht, dass es an dem RPi 4 liegt.
Hast Du mal eine ältere Version des Treibers getestet?
Die Sticks an einem anderen Rechner getestet?

Die Sticks können auch defekt sein, und es ist einfach Zufall, dass der Fehler genau nach dem Upgrade auftritt.

~ Markus

14
{Single, Dual, Quad} Sundtek SkyTV Ultimate / mediasrv: page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP)
« am: September 21, 2020, 06:14:42 Nachmittag »
Hallo,

Ich habe einen Raspberry Pi 4 Model B Rev 1.4 (DT) mit 8 GB RAM und erhalte diesen Fehler:
Code: [Auswählen]
mediasrv: page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 3 PID: 19763 Comm: mediasrv Tainted: G         C        5.4.51-v8+ #1333
Raspberry Pi OS, 64 bit Version.

8 GB RAM sollten doch reichen (?). Muss ich das System speziell konfigurieren, damit der RAM auch von mediasrv genutzt werden kann?

~Markus

15
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Was bedeuten SNR, BER, ... ?
« am: Januar 05, 2019, 06:24:27 Nachmittag »
Hallo,

es sind 2 alte Tuner.  /opt/bin/mediaclient -e :
Zitat
**** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate II (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 1-1.4.2
  [SERIAL]:
     ID: U110927104102
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

device 1: [Sundtek SkyTV Ultimate II (USB 2.0)]  DVB-S/S2, REMOTE-CONTROL
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 1-1.1
  [SERIAL]:
     ID: U110927104037
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput1

~ Markus

Seiten: [1] 2 3