Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.

Themen - MarkusEh

Seiten: [1]

{Single, Dual, Quad} Sundtek SkyTV Ultimate / Restart automatisieren?

« am: August 15, 2022, 11:17:46 Vormittag »

Hallo,

Ich habe ein 24/7 System (rpi4).
Immer wieder gibt es Empfangsprobleme, die sich durch einen Restart lösen lassen.
Kann man das automatisieren?
Also automatisiert erkennen, dass etwas nicht geht, und dann restarten?

Code: [Auswählen]

markus@rpi4s:/usr/local/src/vdr-plugin-live $ /opt/bin/mediaclient --testastra -d /dev/dvb/adapter1/frontend0
Testing Astra 19.2 Frequencies
DVBS
LO Band / 18V:
Checking for lock:
..........
LO Band / 13V:
Checking for lock:
. [LOCKED]
HI Band / 18V:
Checking for lock:                                                                                                                        ..........
HI Band / 13V:
Checking for lock:
..........
DVB-S2 ZDF HD / 18V
Checking for lock:
..........
markus@rpi4s:/usr/local/src/vdr-plugin-live $ sudo systemctl stop vdr
markus@rpi4s:/usr/local/src/vdr-plugin-live $ sudo killall mediasrv
markus@rpi4s:/usr/local/src/vdr-plugin-live $ sudo /opt/bin/mediaclient --start
markus@rpi4s:/usr/local/src/vdr-plugin-live $ /opt/bin/mediaclient --testastra -d /dev/dvb/adapter1/frontend0
Testing Astra 19.2 Frequencies
DVBS
LO Band / 18V:
Checking for lock:
. [LOCKED]
LO Band / 13V:
Checking for lock:
. [LOCKED]
HI Band / 18V:
Checking for lock:
. [LOCKED]
HI Band / 13V:
Checking for lock:
.. [LOCKED]
DVB-S2 ZDF HD / 18V
Checking for lock:
. [LOCKED]

Man sieht klar, dass vor dem Restart von mediasrv viele Locks fehlen. Die nach dem Restart sofort kommen.

~ Markus

{Single, Dual, Quad} Sundtek SkyTV Ultimate / vdr[75260]: double free or corruption (out)

« am: Juni 14, 2021, 07:13:21 Nachmittag »

Hallo,

vdr stürzt ab, mit der Meldung "vdr[75260]: double free or corruption (out)".
Mediaclient -e:

Zitat

**** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate II (USB 2.0)] DVB-S/S2, REMOTE-CONTROL
[INFO]:
STATUS: STANDBY
[BUS]:
ID: 2-3
[SERIAL]:
ID: U110927104102
[DVB-S/S2]:
FESTATUS: STANDBY
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
[REMOTECONTROL]:
INPUT0: /dev/mediainput0

device 1: [Sundtek SkyTV Ultimate II (USB 2.0)] DVB-S/S2, REMOTE-CONTROL
[INFO]:
STATUS: STANDBY
[BUS]:
ID: 2-6
[SERIAL]:
ID: U110927104037
[DVB-S/S2]:
FESTATUS: STANDBY
FRONTEND: /dev/dvb/adapter1/frontend0
DVR: /dev/dvb/adapter1/dvr0
DMX: /dev/dvb/adapter1/demux0
[REMOTECONTROL]:
INPUT0: /dev/mediainput1

backtrace:

Zitat

#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50

set = {__val = {0, 80, 4, 94792703908451, 140632690873040, 4, 4, 7904, 140632933895072, 140633426445392, 8, 140633703069807, 94792703906928, 8, 7307199742750123385, 140633426445392}}

pid = <optimized out>

tid = <optimized out>

#1 0x00007fe7d5e80859 in __GI_abort () at abort.c:79

save_stage = 1

act =

{__sigaction_handler = {sa_handler = 0x62696c2f7273752f, sa_sigaction = 0x62696c2f7273752f}, sa_mask = {__val = {31, 31, 7904, 140632933894856, 140633426445392, 8, 140633703069807, 94792703906928, 8, 140633704570923, 140633426445392, 140632933894608, 0, 62, 140632690964048, 140633426444800}}, sa_flags = 62, sa_restorer = 0x3e}

sigs = {__val = {32, 0 <repeats 15 times>}}

#2 0x00007fe7d5eeb3ee in __libc_message (action=action@entry=do_abort, fmt=fmt@entry=0x7fe7d6015285 "%s\n") at ../sysdeps/posix/libc_fatal.c:155

ap = {{gp_offset = 24, fp_offset = 0, overflow_arg_area = 0x7fe7c56d4320, reg_save_area = 0x7fe7c56d42b0}}

fd = <optimized out>

list = <optimized out>

nlist = <optimized out>

cp = <optimized out>

#3 0x00007fe7d5ef347c in malloc_printerr (str=str@entry=0x7fe7d6017670 "double free or corruption (out)") at malloc.c:5347

#4 0x00007fe7d5ef5120 in _int_free (av=0x7fe7d6046b80 <main_arena>, p=0x7fe7a80e85b0, have_lock=<optimized out>) at malloc.c:4314

size = 384

fb = <optimized out>

nextchunk = 0x7fe7a80e8730

nextsize = <optimized out>

nextinuse = <optimized out>

prevsize = <optimized out>

bck = <optimized out>

fwd = <optimized out>

__PRETTY_FUNCTION__ = "_int_free"

#5 0x00007fe7d662b1e9 in () at /opt/lib/libmediaclient.so

#6 0x00007fe7d66233cd in close () at /opt/lib/libmediaclient.so

#7 0x00005636a56e6651 in cSectionHandler::Del(cFilterData const*) (this=0x5636a639d610, FilterData=FilterData@entry=0x7fe799ba22c0) at sections.c:108

fh = 0x7fe79bca04b0

#8 0x00005636a5690650 in cFilter::Del(unsigned short, unsigned char, unsigned char) (this=this@entry=0x5636a63a6330, Pid=<optimized out>, Tid=Tid@entry=2 '\002', Mask=Mask@entry=255 '\377')

at filter.c:229

fd = 0x7fe799ba22c0

#9 0x00005636a56cd3d7 in cPatFilter::SwitchToNextPmtPid() (this=this@entry=0x5636a63a6330) at pat.c:410

#10 0x00005636a56cebe9 in cPatFilter::Process(unsigned short, unsigned char, unsigned char const*, int)

(this=0x5636a63a6330, Pid=<optimized out>, Tid=<optimized out>, Data=0x7fe7c56d4dc0 "\002\260;n\322\301", Length=<optimized out>) at pat.c:479

pmt =

{<SI::NumberedSection> = {<SI::CRCSection> = {<SI::Section> = {<SI::Object> = {<SI::Parsable> = {_vptr.Parsable = 0x5636a5798bb0 <vtable for SI::PMT+16>, parsed = true}, data = {data_ = 0x7fe799c63f80, off = 0}}, <No data fields>}, <No data fields>}, <No data fields>}, commonDescriptors = {<SI::Loop> = {<SI::VariableLengthPart> = {<SI::Object> = {<SI::Parsable> = {_vptr.Parsable = 0x5636a57927d0 <vtable for SI::DescriptorLoop+16>, parsed = false}, data = {data_ = 0x7fe799c63f80, off = 12}}, length = 0}, <No data fields>}, domain = SI::SI}, streamLoop = {<SI::Loop> = {<SI::VariableLengthPart> = {<SI::Object> = {<SI::Parsable> = {_vptr.Parsable = 0x5636a57958c0 <vtable for SI::StructureLoop<SI::PMT::Stream>+16>, parsed = false}, data = {data_ = 0x7fe799c63f80, off = 12}}, length = 46}, <No data fields>}, <No data fields>}, s = 0x7fe7c56d4dc0}

StateKey = {stateLock = 0x3d600010000, write = 100, state = 0, timedOut = 240}

Channels = <optimized out>

Channel = <optimized out>

ChannelsModified = <optimized out>

MutexLock = {mutex = 0x5636a63a63e8, locked = true}

#11 0x00005636a56e6b56 in cSectionHandler::Action() (this=0x5636a639d610) at sections.c:211

fi = 0x5636a63a6330

pid = 330

tid = 2

len = 62

buf = "\002\260;n\322\301\000\000\341K\360\000$\341K\360\003R\001\037\021\341L\360\tR\001 \n\004deu\000\021\341M\360\tR\001!\n\004deu\000\005\341R\360\005o\003\000\020\340BC,\270\005Die besten Zoogeschichten aus NRWi\003\373\062\031P\016\365\v\tdeuHD-VideoP\f\362\003\002deustereoP\033\362\003\004deuohne AudiodeskriptionP\027\364B\021deuDolby Digital 2.0P\031\363 \006deuohne DV"...

r = <optimized out>

fh = <optimized out>

ThreadLock = {thread = 0x5636a639d610, locked = true}

i = <optimized out>

DeviceHasLock = true

NumFilters = <optimized out>

pfd = <optimized out>

oldStatusCount = 6031

#12 0x00005636a570fde5 in cThread::StartThread(cThread*) (Thread=0x5636a639d610) at thread.c:301
#13 0x00007fe7d6567609 in start_thread (arg=<optimized out>) at pthread_create.c:477

ret = <optimized out>

pd = <optimized out>

unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140633426454272, -2587623203588688243, 140732040950878, 140732040950879, 140732040950880, 140633426452224, 2583202227297040013, 2583173699283433101}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}

not_first_call = 0

#14 0x00007fe7d5f7d293 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95

{Single, Dual, Quad} Sundtek SkyTV Ultimate / Netzwerk, kein Empfang am client

« am: Mai 24, 2021, 06:46:33 Nachmittag »

Hallo,

Am Server, rpi:

Zitat

$ /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [ Dual S2] DVB-S/S2, REMOTE-CONTROL, DVB-S/S2
[INFO]:
STATUS: ACTIVE
[BUS]:
ID: 1-1.4.4.2
[SERIAL]:
ID: U201009190655
[DVB-S/S2]:
FESTATUS: STANDBY
LNBVOLTAGE: DISABLED
LNBSUPPLY: USBPOWER
LNBSTATUS: OK
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
[REMOTECONTROL]:
INPUT0: /dev/mediainput0
[DVB-S/S2]:
FESTATUS: STANDBY
FRONTEND: /dev/dvb/adapter1/frontend0
DVR: /dev/dvb/adapter1/dvr0
DMX: /dev/dvb/adapter1/demux0

Das funktioniert so weit, und VDR am Server kann damit auch Sendungen aufnehmen.
Am client:

Zitat

$ /opt/bin/mediaclient --mount 192.168.x.x
Successfully mounted: 192.168.x.x
$ mediaclient -e
*** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate II (USB 2.0)] DVB-S/S2, REMOTE-CONTROL
[INFO]:
STATUS: STANDBY
[BUS]:
ID: 2-3
[SERIAL]:
ID: U110927104102
[DVB-S/S2]:
FESTATUS: STANDBY
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
[REMOTECONTROL]:
INPUT0: /dev/mediainput0

device 1: [Sundtek SkyTV Ultimate II (USB 2.0)] DVB-S/S2, REMOTE-CONTROL
[INFO]:
STATUS: STANDBY
[BUS]:
ID: 2-6
[SERIAL]:
ID: U110927104037
[DVB-S/S2]:
FESTATUS: STANDBY
FRONTEND: /dev/dvb/adapter1/frontend0
DVR: /dev/dvb/adapter1/dvr0
DMX: /dev/dvb/adapter1/demux0
[REMOTECONTROL]:
INPUT0: /dev/mediainput1

device 2: [ (192.168.x.x)] DVB-S/S2, NETWORK-DEVICE, DVB-S/S2
[INFO]:
STATUS: STANDBY
[NETWORKPATH]:
PATH: 192.168.x.x
[SERIAL]:
ID: U201009190655
[DVB-S/S2]:
FESTATUS: STANDBY
FRONTEND: /dev/dvb/adapter2/frontend0
DVR: /dev/dvb/adapter2/dvr0
DMX: /dev/dvb/adapter2/demux0
[DVB-S/S2]:
FESTATUS: STANDBY
FRONTEND: /dev/dvb/adapter3/frontend0
DVR: /dev/dvb/adapter3/dvr0
DMX: /dev/dvb/adapter3/demux0

Sieht eigentlich gut aus. Wenn ich dann VDR am Client mit /dev/dvb/adapter2/frontend0 laufen lasse, bekomme ich kein Bild.
VDR mit /dev/dvb/adapter0/frontend0 zeigt ein Bild.

~ Markus

{Single, Dual, Quad} Sundtek SkyTV Ultimate / Kein Empfang mehr

« am: Dezember 07, 2020, 10:50:28 Nachmittag »

Hallo,

Ich habe Sundtek SkyTV Dual 2x (DVB-S/S2/S2X) . Hat bisher super funktioniert. Aber jetzt:

mediaclient -e:

Zitat

**** List of Media Hardware Devices ****
device 0: [ Dual S2] DVB-S/S2, REMOTE-CONTROL, DVB-S/S2
[INFO]:
STATUS: STANDBY
[BUS]:
ID: 1-1.4.4.2
[SERIAL]:
ID: U201009190655
[DVB-S/S2]:
FESTATUS: ACTIVE
LNBVOLTAGE: DISABLED
LNBSUPPLY: USBPOWER
LNBSTATUS: OK
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
[REMOTECONTROL]:
INPUT0: /dev/mediainput0
[DVB-S/S2]:
FESTATUS: STANDBY
FRONTEND: /dev/dvb/adapter1/frontend0
DVR: /dev/dvb/adapter1/dvr0
DMX: /dev/dvb/adapter1/demux0

VDR erkennt den Stick auch, kann aber nichts empfangen.
/opt/bin/mediaclient -m DVBS -f 12400000 -M 8PSK -S 27500000 -E 2/3 -V V :

Zitat

Using device: /dev/dvb/adapter0/frontend0
Setting DVB-S/S2 tune Parameters
using HI/LO Band frequency: 12400000
Modulation: PSK8 (DVB-S2)
Symbolrate: 27500000
Voltage: 13 Volt (Vertical)
FEC: 2/3
Tone ON
Frequency: 1800000
Syntax OK
Checking for lock:
..........

/opt/bin/mediaclient --readsignal=0 -d /dev/dvb/adapter0/frontend0

Zitat

== reading digital TV signal ==
SIGNAL: [ ] ( 0%) SATQUALITY: 0% SNR: 0 BER: 0 FREQ: 1800000 Hz LOCKED: NO SYS: DVB-S SYM: 27500000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: V(13V) TONE: ON
SIGNAL: [ ] ( 0%) SATQUALITY: 0% SNR: 0 BER: 0 FREQ: 1800000 Hz LOCKED: NO SYS: DVB-S SYM: 27500000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: V(13V) TONE: ON
SIGNAL: [ ] ( 0%) SATQUALITY: 0% SNR: 0 BER: 0 FREQ: 1800000 Hz LOCKED: NO SYS: DVB-S SYM: 27500000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: V(13V) TONE: ON
...

Das läuft am rpi4s.
Ich habe den rpi restartet, den Stick ausgesteckt, stromlos gemacht und wieder eingesteckt. Hat nichts geholfen.
Auf meinem anderer Rechner (mit einem anderen Empfänger) funktioniert der Empfang prima.

Ich vermute, dass der Empfänger defekt ist.

~Markus

[Update Sundtek]:
Titel aktualisiert

{Single, Dual, Quad} Sundtek SkyTV Ultimate / mediasrv: page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP)

« am: September 21, 2020, 06:14:42 Nachmittag »

Hallo,

Ich habe einen Raspberry Pi 4 Model B Rev 1.4 (DT) mit 8 GB RAM und erhalte diesen Fehler:

Code: [Auswählen]

mediasrv: page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 3 PID: 19763 Comm: mediasrv Tainted: G         C        5.4.51-v8+ #1333

Raspberry Pi OS, 64 bit Version.

8 GB RAM sollten doch reichen (?). Muss ich das System speziell konfigurieren, damit der RAM auch von mediasrv genutzt werden kann?

~Markus

{Single, Dual, Quad} Sundtek SkyTV Ultimate / Was bedeuten SNR, BER, ... ?

« am: Januar 04, 2019, 05:38:14 Nachmittag »

Hallo,

Ich bekomme mit dem Sundtek SkyTV Ultimate II (USB 2.0)] DVB-S/S2:
/opt/bin/mediaclient --readsignal=0 -d /dev/dvb/adapter0/frontend0 :

Zitat

== reading digital TV signal ==
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 0 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 0 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 0 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF
SIGNAL: [.......................... ] ( 78%) SNR: 0 BER: 46671 FREQ: 1743000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: H(18V) TONE: OFF

/opt/bin/mediaclient --readsignal=0 -d /dev/dvb/adapter1/frontend0 :

Zitat

== reading digital TV signal ==
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1597000 Hz LOCKED: YES SYS: DVB-S SYM: 22000000 FEC: FEC_2_3 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 0 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 0 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF
SIGNAL: [................................ ] ( 96%) SNR: 0 BER: 46671 FREQ: 1880000 Hz LOCKED: YES SYS: DVB-S SYM: 27500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: V(13V) TONE: OFF

Signal "96%" und "78%" erscheint mir ausreichend (?). Falls nicht, ich könnte da noch was an meinem Multiswitch drehen.

Was bedeutet SNR 0? Ich meine, wenn da wirklich kein Signal wäre, wieso steht dann da LOCKED: YES?

Und was bedeutet BER?

~ Markus

{Single, Dual, Quad} Sundtek SkyTV Ultimate / unable to submit urb

« am: März 07, 2013, 09:54:02 Nachmittag »

Hallo,

Ich erhalte folgenden Fehler:

Code: [Auswählen]

Mar  5 21:26:11 debian kernel: unable to submit urb
Mar  5 21:26:12 debian kernel: unable to submit urb
Mar  5 21:26:12 debian kernel: unable to submit urb
Mar  5 21:26:13 debian kernel: unable to submit urb
Mar  5 21:26:13 debian kernel: unable to submit urb
Mar  5 21:26:14 debian kernel: unable to submit urb
Mar  5 21:26:15 debian kernel: unable to submit urb
Mar  5 21:26:15 debian kernel: unable to submit urb
Mar  5 21:26:16 debian kernel: unable to submit urb
Mar  5 21:26:17 debian kernel: unable to submit urb
Mar  5 21:26:48 debian vdr: [2122] ERROR: video data stream broken
Mar  5 21:26:48 debian vdr: [2122] initiating emergency exit

Der Fehler "unable to submit urb" kommt von usbkhelper:

Code: [Auswählen]

Mar  5 21:03:36 debian kernel: usb 1-1.1: new high-speed USB device number 9 using orion-ehci
Mar  5 21:03:36 debian kernel: usbkhelper: dreambox acceleration not detected
Mar  5 21:03:36 debian kernel: usbkhelper: device is attached to a USB 2.0 bus
Mar  5 21:03:36 debian kernel: usbkhelper: using isoc transfer
Mar  5 21:03:36 debian kernel: usbkhelper: registered /dev/ngdvr0
Mar  5 21:03:36 debian kernel: usbkhelper: mknod /dev/ngdvr0 c 249 0
Mar  5 21:03:38 debian kernel: usb 1-1.2: new high-speed USB device number 10 using orion-ehci
Mar  5 21:03:38 debian kernel: usbkhelper: dreambox acceleration not detected
Mar  5 21:03:38 debian kernel: usbkhelper: device is attached to a USB 2.0 bus
Mar  5 21:03:38 debian kernel: usbkhelper: using isoc transfer
Mar  5 21:03:38 debian kernel: usbkhelper: registered /dev/ngdvr1
Mar  5 21:03:38 debian kernel: usbkhelper: mknod /dev/ngdvr1 c 249 1

Nach dem VDR Restart wurde die Aufnahme fortgesetzt.
Ich habe 2 Sundtek DVB-S2 Sticks an dem sheeva-plug.
Was ist die Ursache für diesen Fehler?

- Markus

{Single, Dual, Quad} Sundtek SkyTV Ultimate / mediasrv: page allocation failure

« am: November 16, 2012, 12:12:56 Vormittag »

Hallo,

ich habe den Fehler: "mediasrv: page allocation failure".
Ich habe ein sheeva plug mit debian sqeeze, Linux debian 2.6.36 #3 PREEMPT Sun Dec 5 16:26:45 GMT 2010 armv5tel GNU/Linux .
Free zeigt

Code: [Auswählen]

             total       used       free     shared    buffers     cached
Mem:        513292     396804     116488          0      82932     159816
-/+ buffers/cache:     154056     359236
Swap:            0          0          0

an, es sollte also noch genug Speicher da sein. Im syslog steht:

Code: [Auswählen]

Nov 15 22:43:12 debian kernel: mediasrv: page allocation failure. order:5, mode:0x40d0
Nov 15 22:43:12 debian kernel: [<c0033698>] (unwind_backtrace+0x0/0xec) from [<c00a151c>] (__alloc_pages_nodemask+0x4c0/0x5a0)
Nov 15 22:43:12 debian kernel: [<c00a151c>] (__alloc_pages_nodemask+0x4c0/0x5a0) from [<c00a160c>] (__get_free_pages+0x10/0x3c)
Nov 15 22:43:12 debian kernel: [<c00a160c>] (__get_free_pages+0x10/0x3c) from [<c00c89d0>] (__kmalloc+0x3c/0x1dc)
Nov 15 22:43:12 debian kernel: [<c00c89d0>] (__kmalloc+0x3c/0x1dc) from [<c0303b1c>] (proc_submiturb+0x5b8/0xaa8)
Nov 15 22:43:12 debian kernel: [<c0303b1c>] (proc_submiturb+0x5b8/0xaa8) from [<c030511c>] (usbdev_ioctl+0xbe4/0x1170)
Nov 15 22:43:12 debian kernel: [<c030511c>] (usbdev_ioctl+0xbe4/0x1170) from [<c00d9cc4>] (vfs_ioctl+0x20/0x3c)
Nov 15 22:43:12 debian kernel: [<c00d9cc4>] (vfs_ioctl+0x20/0x3c) from [<c00da41c>] (do_vfs_ioctl+0x540/0x598)
Nov 15 22:43:12 debian kernel: [<c00da41c>] (do_vfs_ioctl+0x540/0x598) from [<c00da4a8>] (sys_ioctl+0x34/0x54)
Nov 15 22:43:12 debian kernel: [<c00da4a8>] (sys_ioctl+0x34/0x54) from [<c002e9a0>] (ret_fast_syscall+0x0/0x2c)
Nov 15 22:43:12 debian kernel: Mem-info:
Nov 15 22:43:12 debian kernel: Normal per-cpu:
Nov 15 22:43:12 debian kernel: CPU    0: hi:  186, btch:  31 usd: 158
Nov 15 22:43:12 debian kernel: active_anon:20710 inactive_anon:20749 isolated_anon:0
Nov 15 22:43:12 debian kernel: active_file:13879 inactive_file:51954 isolated_file:0
Nov 15 22:43:12 debian kernel: unevictable:0 dirty:668 writeback:2109 unstable:0
Nov 15 22:43:12 debian kernel: free:15012 slab_reclaimable:2038 slab_unreclaimable:1250
Nov 15 22:43:12 debian kernel: mapped:3844 shmem:1875 pagetables:387 bounce:0
Nov 15 22:43:12 debian kernel: Normal free:60048kB min:2884kB low:3604kB high:4324kB active_anon:82840kB inactive_anon:82996kB active_file:55516kB inactive_file:207816kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:520192kB mlocked:0kB dirty:2672kB writeback:8436kB mapped:15376kB shmem:7500kB slab_reclaimable:8152kB slab_unreclaimable:5000kB kernel_stack:952kB pagetables:1548kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
Nov 15 22:43:12 debian kernel: lowmem_reserve[]: 0 0
Nov 15 22:43:12 debian kernel: Normal: 1202*4kB 977*8kB 1398*16kB 693*32kB 39*64kB 3*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 60048kB
Nov 15 22:43:12 debian kernel: 67708 total pagecache pages
Nov 15 22:43:12 debian kernel: 0 pages in swap cache
Nov 15 22:43:12 debian kernel: Swap cache stats: add 0, delete 0, find 0/0
Nov 15 22:43:12 debian kernel: Free swap  = 0kB
Nov 15 22:43:12 debian kernel: Total swap = 0kB
Nov 15 22:43:12 debian kernel: 131072 pages of RAM
Nov 15 22:43:12 debian kernel: 15388 free pages
Nov 15 22:43:12 debian kernel: 2749 reserved pages
Nov 15 22:43:12 debian kernel: 3050 slab pages
Nov 15 22:43:12 debian kernel: 58315 pages shared
Nov 15 22:43:12 debian kernel: 0 pages swap cached

- Markus

{Single, Dual, Quad} Sundtek SkyTV Ultimate / Wie viele Sundtek SkyTV Ultimate (DVB-S/S2) an ein Sheeva Plug

« am: November 04, 2012, 11:18:11 Nachmittag »

Hallo,

Ich habe ein Sheeva Plug. Darauf läuft debian squeeze und VDR 1.7.31 .
Wie viele Sundtek SkyTV Ultimate (DVB-S/S2) kann ich damit betreiben?

Derzeit habe ich 2 SkyTV Ultimate angeschlossen. Einer für den VDR auf dem Sheeva Plug, einer für einen anderen VDR über das Netzwerk. Damit kommt mediaserv auf etwa 25-30% CPU .

Wenn ich nun 3 SkyTV Ultimate anschließen würde und alle 3 für den VDR auf dem Sheeva Plug verwenden würde, sollte das funktionieren? Die Festplatte ist auch am USB angeschlossen. Wenn ich nun 3 verschiedene Sendungen aufzeichne, führt das zu Problemen (Datenrate) auf dem USB?

Wie wäre das, wenn noch mehr SkyTV Ultimate (z.B. 4) an dem Sheeva Plug angeschlossen werden?

- Markus

{Single, Dual, Quad} Sundtek SkyTV Ultimate / no lock found (kein Bild)

« am: Februar 11, 2012, 03:04:20 Nachmittag »

Hallo,

ich bekomme kein Bild mehr. Im Log steht: "no lock found".
In einem anderen Thread steht, dass es helfen kann, den USB Stick stromlos zu machen.
Habe ich jetzt gemacht. Wenn ich den Stick wieder anschließe, worauf muss ich dann achten (z.B. Reihenfolge, ...)?

Ich schließe den Stick an ein Sheeva-plug und einen Multiswitch.

- Markus

{Single, Dual, Quad} Sundtek SkyTV Ultimate / Treiber läuft auf dem Server nicht durch

« am: November 22, 2011, 09:49:40 Nachmittag »

Hallo,

ich habe zwei DVBs/S2 Sticks an einem sheeva-plug (Server). Der Plug läuft 24/7. Der Treiber läuft mit /opt/bin/mediaclient --enablenetwork=on .

Der Client ist ein VDR (ubuntu. yaVDR Pakete). Nach der Installation läuft alles. Abends fahre ich den Client herunter (der Server läuft weiter).

Wenn ich am nächsten Tag den Client starte, läuft der sundtek Treiber nicht mehr auf dem Server:

Code: [Auswählen]

/opt/bin/mediaclient -e
auf dem Server zeigt die Ausgabe:

Code: [Auswählen]

Driver is currently not running, please start it as root
mediaclient --start

woran liegt das? Wie kann ich erreichen, dass der Treiber durchläuft?
Hier noch die Log Datei mediasrv.log (Als Attachment hat es nicht funktioniert, daher im Text):

Code: [Auswählen]

2011-11-19 23:35:38 [982] restarting logging
2011-11-19 23:35:38 [982] problem reading data in service processor...
2011-11-20 20:07:00 [3081] Starting up Multimedia Framework (Nov  5 2011 15:11:20)
2011-11-20 20:07:00 [3081] API Version: 5.1
2011-11-20 20:07:00 [3081] Running on Linux (2.6.36)
2011-11-20 20:07:00 [3081] scanning devices
2011-11-20 20:07:00 [3081] scanning for plugins
2011-11-20 20:07:00 [3081] Starting up device manager
2011-11-20 20:07:00 [3082] Starting service processor (PID 3082)
2011-11-20 20:07:00 [3081] unable to open /dev/misc
2011-11-20 20:07:00 [3081] scanning devices done
2011-11-20 20:07:00 [3081] attached devices:
2011-11-20 20:07:00 [3081] registering ID: 0
2011-11-20 20:07:00 [3082] Autostarting scripts in /etc/sundtek/
2011-11-20 20:07:00 [3082] executed all available items
2011-11-20 20:07:00 [3081] disconnecting kernel driver
2011-11-20 20:07:01 [3081] Attaching DVB-S/S2
2011-11-20 20:07:06 [3081] demodulator successfully attached (DVB_S/S2)!
2011-11-20 20:07:06 [3081] requesting to attach tuner(s) now
2011-11-20 20:07:06 [3081] registering: adapter0/0
2011-11-20 20:07:06 [3081] registered virtual: /dev/dvb/adapter0/frontend0
2011-11-20 20:07:06 [3081] registered virtual: /dev/dvb/adapter0/demux0
2011-11-20 20:07:06 [3081] registered virtual: /dev/dvb/adapter0/dvr0
2011-11-20 20:07:06 [3081] Setting RC Protocol to NEC
2011-11-20 20:07:06 [3081] registered virtual: /dev/mediainput0
2011-11-20 20:07:06 [3082] trying to load uinput module
2011-11-20 20:07:06 [3082] loading uinput kernel extention failed, remote control will not work with lirc
2011-11-20 20:07:06 [3081] No remote control support available
2011-11-20 20:07:06 [3081] 
2011-11-20 20:07:06 [3081] Sundtek MediaTV Driver loaded. This driver is licensed for non-commercial use
2011-11-20 20:07:06 [3081] with Sundtek MediaTV only
2011-11-20 20:07:06 [3081] Driver loaded within 5811 milliseconds
2011-11-20 20:07:06 [3081] Serial(0): U110927104037
2011-11-20 20:07:06 [3081] registering ID: 1
2011-11-20 20:07:06 [3081] disconnecting kernel driver
2011-11-20 20:07:07 [3081] Attaching DVB-S/S2
2011-11-20 20:07:12 [3081] demodulator successfully attached (DVB_S/S2)!
2011-11-20 20:07:12 [3081] requesting to attach tuner(s) now
2011-11-20 20:07:12 [3081] registering: adapter1/0
2011-11-20 20:07:12 [3081] registered virtual: /dev/dvb/adapter1/frontend0
2011-11-20 20:07:12 [3081] registered virtual: /dev/dvb/adapter1/demux0
2011-11-20 20:07:12 [3081] registered virtual: /dev/dvb/adapter1/dvr0
2011-11-20 20:07:12 [3081] Setting RC Protocol to NEC
2011-11-20 20:07:12 [3081] registered virtual: /dev/mediainput1
2011-11-20 20:07:12 [3082] trying to load uinput module
2011-11-20 20:07:12 [3082] loading uinput kernel extention failed, remote control will not work with lirc
2011-11-20 20:07:12 [3081] No remote control support available
2011-11-20 20:07:12 [3081] 
2011-11-20 20:07:12 [3081] Sundtek MediaTV Driver loaded. This driver is licensed for non-commercial use
2011-11-20 20:07:12 [3081] with Sundtek MediaTV only
2011-11-20 20:07:12 [3081] Driver loaded within 5708 milliseconds
2011-11-20 20:07:12 [3081] Serial(1): U110927104102
2011-11-20 20:07:12 [3081] Initial devicescan done, switching detection mode
2011-11-20 20:07:21 [3081] Enabling standby
2011-11-20 20:07:27 [3081] Enabling standby
2011-11-20 21:38:26 [3081] start network
2011-11-20 21:38:26 [3081] Starting listener
2011-11-20 21:38:26 [3081] Listening on 9234
2011-11-20 21:38:26 [3081] received notification client request
2011-11-20 21:38:29 [3081] NETDRV: Trying to bind interface 0
2011-11-20 21:38:29 [3081] device supports Digital TV
2011-11-20 21:38:29 [3081] disabling remote control
2011-11-20 21:38:29 [3081] listening on port: 40881
2011-11-20 21:46:53 [3081] NETDRV: Trying to bind interface 0
2011-11-20 21:46:53 [3081] device supports Digital TV
2011-11-20 21:46:53 [3081] disabling remote control
2011-11-20 21:46:53 [3081] listening on port: 35419
2011-11-20 21:46:53 [3081] NETDRV: Trying to bind interface 1
2011-11-20 21:46:53 [3081] device supports Digital TV
2011-11-20 21:46:53 [3081] disabling remote control
2011-11-20 21:46:53 [3081] listening on port: 34265
2011-11-20 21:47:23 [3081] NETDRV: Trying to bind interface 0
2011-11-20 21:47:23 [3081] device supports Digital TV
2011-11-20 21:47:23 [3081] disabling remote control
2011-11-20 21:47:23 [3081] listening on port: 34200
2011-11-20 21:47:23 [3081] NETDRV: Trying to bind interface 1
2011-11-20 21:47:23 [3081] device supports Digital TV
2011-11-20 21:47:23 [3081] disabling remote control
2011-11-20 21:47:23 [3081] listening on port: 43178
2011-11-20 22:13:49 [3081] NETDRV: Trying to bind interface 0
2011-11-20 22:13:49 [3081] device supports Digital TV
2011-11-20 22:13:49 [3081] disabling remote control
2011-11-20 22:13:49 [3081] listening on port: 60049
2011-11-20 22:13:49 [3081] NETDRV: Trying to bind interface 1
2011-11-20 22:13:49 [3081] device supports Digital TV
2011-11-20 22:13:49 [3081] disabling remote control
2011-11-20 22:13:49 [3081] listening on port: 50081
2011-11-20 22:13:50 [3081] NETDRV: Trying to bind interface 0
2011-11-20 22:13:50 [3081] device supports Digital TV
2011-11-20 22:13:50 [3081] disabling remote control
2011-11-20 22:13:50 [3081] listening on port: 55793
2011-11-20 22:13:50 [3081] NETDRV: Trying to bind interface 1
2011-11-20 22:13:50 [3081] device supports Digital TV
2011-11-20 22:13:50 [3081] disabling remote control
2011-11-20 22:13:50 [3081] listening on port: 36696
2011-11-20 22:13:55 [3081] Waking up device
2011-11-20 22:13:55 [3081] voltage is low/0
2011-11-20 22:13:55 [3081] Waking up device
2011-11-20 22:13:56 [3081] no lock found
2011-11-20 22:13:56 [3081] voltage is low/0
2011-11-20 22:13:56 [3081] no lock found
2011-11-20 22:13:57 [3081] no lock found
2011-11-20 22:13:58 [3081] no lock found
2011-11-20 22:13:59 [3081] no lock found
2011-11-20 22:13:59 [3081] no lock found
2011-11-20 22:14:00 [3081] no lock found
2011-11-20 22:14:00 [3081] no lock found
2011-11-20 22:14:01 [3081] no lock found
2011-11-20 22:14:01 [3081] no lock found
2011-11-20 22:14:02 [3081] no lock found
2011-11-20 22:14:02 [3081] no lock found
2011-11-20 22:14:03 [3081] no lock found
2011-11-20 22:14:03 [3081] no lock found
2011-11-20 22:14:04 [3081] no lock found
2011-11-20 22:14:04 [3081] no lock found
2011-11-20 22:14:05 [3081] no lock found
2011-11-20 22:14:05 [3081] no lock found
2011-11-20 22:14:06 [3081] no lock found
2011-11-20 22:14:07 [3081] no lock found
2011-11-20 22:14:07 [3081] no lock found
2011-11-20 22:14:07 [3081] Set tone off/0
2011-11-20 22:14:07 [3081] voltage is high/0
2011-11-20 22:14:07 [3081] Starting diseqc timing
2011-11-20 22:14:07 [3081] diseqc len: 4/0
2011-11-20 22:14:07 [3081] Set tone off/0
2011-11-20 22:14:08 [3081] Diseqc execution time: 267 ms
2011-11-20 22:14:08 [3081] Set tone off/0
2011-11-20 22:14:08 [3081] no lock found
2011-11-20 22:14:08 [3081] Starting tuning timing
2011-11-20 22:14:08 [3081] Tuning DVB-S2 (8PSK) Transponder
2011-11-20 22:14:08 [3081] USING FEC_2_3
2011-11-20 22:14:08 [3081] roll off 035
2011-11-20 22:14:08 [3081] LNB tone off
2011-11-20 22:14:08 [3081] voltage is high
2011-11-20 22:14:08 [3081] setting frequency: 1611000
2011-11-20 22:14:08 [3081] setting symbolrate: 22000
2011-11-20 22:14:08 [3081] Good ACQ locked and tracking :-)
2011-11-20 22:14:08 [3081] Tuning delay: 330 ms
2011-11-20 22:14:08 [3081] found lock
2011-11-20 22:14:09 [3081] no lock found
2011-11-20 22:14:09 [3081] Starting up IPTV
2011-11-20 22:14:09 [3081] found lock
2011-11-20 22:14:10 [3081] no lock found
2011-11-20 22:14:11 [3081] found lock
2011-11-20 22:14:11 [3081] no lock found
2011-11-20 22:14:12 [3081] found lock
2011-11-20 22:14:12 [3081] no lock found
2011-11-20 22:14:13 [3081] found lock
2011-11-20 22:14:13 [3081] no lock found
2011-11-20 22:14:14 [3081] found lock
011-11-20 22:14:15 [3081] no lock found
2011-11-20 22:14:16 [3081] found lock
.....
2011-11-20 22:20:10 [3081] no lock found
2011-11-20 22:20:11 [3081] found lock
2011-11-20 22:20:11 [3081] no lock found
2011-11-20 22:20:12 [3081] found lock
2011-11-20 22:20:12 [3081] no lock found
2011-11-20 22:20:13 [3081] found lock
2011-11-20 22:20:13 [3081] no lock found
2011-11-20 22:20:14 [3081] Shutting down IPTV
2011-11-20 22:20:14 [3082] problem reading data in service processor...

- Markus

Seiten: [1]

Sundtek Support Forum