7681
Sundtek MediaTV Pro (Europe) / Re:Networksupport, Howto use Sundtek MediaTV in a homenetwork
« am: September 30, 2010, 03:08:03 Nachmittag »
What kind of server is this 'bubba server'?
ARM, MIPS, X86?
There are 2 ways to lower the CPU requirement
1. enable hardware pid filter (/opt/bin/mediaclient -P on)
2. there's an acceleration kernel module available, this can be compiled in order to optimize the speed on the used architecture
http://www.sundtek.de/support/khelper.tar.gz
Another option would be:
3. You can buy a Seagate Dockstar (1.3 Ghz 128 MB ram for 25$ or 25 EUR, it's available nearly everywhere right now).
The easiest way would be #3 followed by #1 and #2 would probably be most difficult since you need to compile the driver for it
ARM, MIPS, X86?
There are 2 ways to lower the CPU requirement
1. enable hardware pid filter (/opt/bin/mediaclient -P on)
2. there's an acceleration kernel module available, this can be compiled in order to optimize the speed on the used architecture
http://www.sundtek.de/support/khelper.tar.gz
Another option would be:
3. You can buy a Seagate Dockstar (1.3 Ghz 128 MB ram for 25$ or 25 EUR, it's available nearly everywhere right now).
The easiest way would be #3 followed by #1 and #2 would probably be most difficult since you need to compile the driver for it