Hallo!
After long testing here my results:
LINUX
openSUSE 12.2 (x86_64)
Kernel 3.4.28-2.20-desktop x86_64
KDE: 4.9.5 "release 4" Kaffeine 1.2.2
KDE3: 3.5.10 Kaffeine 0.8.8
Kaffeine 1.2.2
- Performed a dirty setup, just connecting the card, disconnecting an old Cinergy and rescanning Astra 19.2 / Hotbird 13.0: no problem!
- Performed a clean setup (complete Kaffeine reset):
The card was not recognized. I didn't wont to waste time, so I installed the recommended Kaffeine version and the card was recognized. I scanned and everything was fine. HOWEVER, by every program start I got the ominous MsgBox (no device found), after closing the box Kaffeine was working normally.Very nesty!. Finally I reverted to the distribution Kaffeine (
http://download.opensuse.org/repositories/KDE:/Release:/49/openSUSE_12.2/ ) and everything works just fine, no more MsgBox.
Kaffeine 0.8.8
- Always working!
WINDOWS 7/8 32/64 bit
Tested on MediaPortal, ProgDVB, DVBDream and DVBViewer.
I have a problem with DISEqC: as long as I assign only LNB 1 everything works, but assigning LNB 1 and LNB 2 brings in the best case that the card doesn't find any signal on LBN 2 (in my case Hotbird).
On my unprofessional eyes it looks like a driver problem. If I am not getting wrong the card was tested under DISEqC. In case of a bug, as Linux user I can live well with that, but if I did something wrong may I ask for some assistance? I used the driver 130123 installing from the inf file.
Thanks in advance!
