Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - Magog

Seiten: [1]
1
Dreambox Settopbox / Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
« am: Juni 15, 2026, 01:02:14 Nachmittag »
Sure, i'll contact when i have enought time for you to test...
I hope this evening.

Thanks.

2
Dreambox Settopbox / Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
« am: Juni 14, 2026, 12:08:44 Nachmittag »
But that is the problem... it doesn´t leave standby mode.
If i change to a DTT channel... nothing. A simple GUI restart and it runs ok.

Thanks.

3
Dreambox Settopbox / Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
« am: Juni 14, 2026, 11:12:54 Vormittag »
Hello, no... i´m saying that it starts ok under the original OS of the machine (opendreambox 2.6) but under OpeanATV it starts in standby mode... running multiboot.

Thanks.

4
Dreambox Settopbox / Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
« am: Juni 13, 2026, 10:23:13 Nachmittag »
Sure.

Autostart - yes.

It starts ok with Dreamos.

Thanks.

5
Dreambox Settopbox / Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
« am: Juni 13, 2026, 11:38:30 Vormittag »
Upps , sorry ... even a simple interface reboot takes out the tunner from standby.

6
Dreambox Settopbox / Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
« am: Juni 13, 2026, 10:51:35 Vormittag »
After reboot:

root@dreamtwo:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [MediaTV Digital Home III (EU)]  DVB-C, DVB-T, DVB-T2
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 1-2
  [SERIAL]:
     ID: U211006190056
  [DVB-C,DVB-T,DVB-T2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0

root@dreamtwo:~# cat /proc/bus/nim_sockets
NIM Socket 0:
        Input_Name: A1
        Type: DVB-S2
        Name: Si2166D
        Has_Outputs: no
        Frontend_Device: 0
        I2C_Device: 2
NIM Socket 1:
        Input_Name: A2
        Type: DVB-S2
        Name: Si2166D
        Has_Outputs: no
        Frontend_Device: 1
        I2C_Device: 2
NIM Socket 2:
        Type: DVB-T2
        Name: Sundtek DVB-T2 (III) (1/0) (USB
        Has_Outputs: no
        Frontend_Device: 2
root@dreamtwo:~#

After Control center action:
root@dreamtwo:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [MediaTV Digital Home III (EU)]  DVB-C, DVB-T, DVB-T2
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 1-2
  [SERIAL]:
     ID: U211006190056
  [DVB-C,DVB-T,DVB-T2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0

root@dreamtwo:~# cat /proc/bus/nim_sockets
NIM Socket 0:
        Input_Name: A1
        Type: DVB-S2
        Name: Si2166D
        Has_Outputs: no
        Frontend_Device: 0
        I2C_Device: 2
NIM Socket 1:
        Input_Name: A2
        Type: DVB-S2
        Name: Si2166D
        Has_Outputs: no
        Frontend_Device: 1
        I2C_Device: 2
NIM Socket 2:
        Type: DVB-T2
        Name: Sundtek DVB-T2 (III) (1/0) (USB
        Has_Outputs: no
        Frontend_Device: 2
root@dreamtwo:~#

So the tunner starts but standby, don´t now if it can be fixed...

Thanks.

7
Dreambox Settopbox / Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
« am: Juni 13, 2026, 10:25:02 Vormittag »
Hello, now that OpenATV is wortking really great with the TWO... i have a problem that didn´t matter before because it was unusable.
After every system restart driver won´t load and i must go to Sundtek control center, press Blue (say no to reinstall driver) and then restart Enigma2.
It works ok after that.
 
Thanks.

8
Treiber / Re: TVheadend Docker Compose Treiber läuft nicht im Docker.
« am: Februar 12, 2024, 08:05:44 Nachmittag »
Thanks, don´t know how and why but the usb worked fine next day .... working ok now.

Thanks.

9
Treiber / Re: TVheadend Docker Compose Treiber läuft nicht im Docker.
« am: November 05, 2023, 09:51:17 Nachmittag »
Zitat von: Sundtek am Oktober 23, 2023, 07:19:00 Nachmittag
ok der Installer wurde aktualisiert, das klappt jetzt und sogar besser als zuvor.

Hello all.
Sorry for writing here in English but I am a bit desperate and I don't know if this has anything to do with my problem.
I have a Dreambox TWO and the tuner has always worked without any problem, but yesterday I did a clean install of the image and I have not been able to make it work again, it works once and when I restart the computer it doesn't start anymore.
I don't know if there has been any change by Sundtek.... I read this and I thought that maybe yes... otherwise my apologies for writing this here if it has nothing to do with it.
I have always used the SSI application to install drivers and control center and have done so many times.

Thanks.

Seiten: [1]