Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - mivilleb

Seiten: [1]
1
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: USB SkyTV Ultimate 8, not picking up all DVB-S stations
« am: Juni 02, 2024, 08:27:01 Vormittag »
None of them returned a Yes for the LOCKED.

I will test with a new dish over the next few weeks and see if that works.

Thanks for your help.

2
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: USB SkyTV Ultimate 8, not picking up all DVB-S stations
« am: Juni 02, 2024, 07:37:06 Vormittag »
For the working channel I get this:

Code: [Auswählen]
SIGNAL: [..............................   ] ( 91%) SATQUALITY:  83%  SNR:  14  BER:      0 FREQ: 12268000   Hz LOCKED: YES SYS: DVB-S2 SYM: 22500000 FEC: FEC_2_3 MOD: QPSK VOLTAGE: H(18V) TONE: ON

For the non-working ones I get this:

Code: [Auswählen]
SIGNAL: [                                 ] (  0%) SATQUALITY:   0%  SNR:   0  BER:      0 FREQ: 12483000   Hz LOCKED:  NO SYS: DVB-S SYM: 22500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: H(18V) TONE: ON

SIGNAL: [                                 ] (  0%) SATQUALITY:   1%  SNR:   0  BER:      0 FREQ: 12456000   Hz LOCKED:  NO SYS: DVB-S SYM: 22500000 FEC: FEC_3_4 MOD: QPSK VOLTAGE: H(18V) TONE: ON



Like I mentioned before, these transponders work fine with my GTMedia Nova 8 receiver and a PCI DVB-S card.

3
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: USB SkyTV Ultimate 8, not picking up all DVB-S stations
« am: Juni 02, 2024, 07:23:34 Vormittag »
For one service that gets listed with w_scan I get this:

Code: [Auswählen]
mivilleb@SatTV:~/Downloads$ /opt/bin/mediaclient -m DVBS2 -f 12268000 -M QPSK -S 22500000 -E 2/3 -V H
Using device: /dev/dvb/adapter0/frontend0
Setting DVB-S/S2 tune Parameters
using HI/LO Band frequency: 12268000
Modulation: QPSK (DVB-S)
Symbolrate: 22500000
Voltage: 18 Volt (Horizontal)
FEC: 2/3
Tone ON
Frequency: 1668000
Syntax OK
Checking for lock:
. [LOCKED]
mivilleb@SatTV:~/Downloads$

4
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: USB SkyTV Ultimate 8, not picking up all DVB-S stations
« am: Juni 02, 2024, 07:19:42 Vormittag »
Original power supply connected and the led is green on stick.

Code: [Auswählen]

mivilleb@SatTV:~/Downloads$ /opt/bin/mediaclient -m DVBS -f 12456000 -M QPSK -S 22500000 -E 3/4 -V H
Using device: /dev/dvb/adapter0/frontend0
Setting DVB-S/S2 tune Parameters
using HI/LO Band frequency: 12456000
Modulation: QPSK (DVB-S)
Symbolrate: 22500000
Voltage: 18 Volt (Horizontal)
FEC: 3/4
Tone ON
Frequency: 1856000
Syntax OK
Checking for lock:
..........
mivilleb@SatTV:~/Downloads$ /opt/bin/mediaclient -m DVBS -f 12483000 -M QPSK -S 22500000 -E 3/4 -V H
Using device: /dev/dvb/adapter0/frontend0
Setting DVB-S/S2 tune Parameters
using HI/LO Band frequency: 12483000
Modulation: QPSK (DVB-S)
Symbolrate: 22500000
Voltage: 18 Volt (Horizontal)
FEC: 3/4
Tone ON
Frequency: 1883000
Syntax OK
Checking for lock:
..........
mivilleb@SatTV:~/Downloads$


5
{Single, Dual, Quad} Sundtek SkyTV Ultimate / USB SkyTV Ultimate 8, not picking up all DVB-S stations
« am: Juni 02, 2024, 06:54:10 Vormittag »
I have the SkyTV Ultimate 8 USB stick connected to a Linux computer with the latest Debian distribution. The system is finding the device and I install the media client using the provided URL to download the code.

Code: [Auswählen]
mivilleb@SatTV:~$ /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [              eLight]  DVB-S/S2, REMOTE-CONTROL
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 1-1
  [SERIAL]:
     ID: U190124005213
  [DVB-S/S2]:
     FESTATUS: ACTIVE
     LNBVOLTAGE: ENABLED
     LNBSUPPLY: USBPOWER
     LNBSTATUS: OK
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

mivilleb@\SatTV:~$

Using w_scan, the stick can only pickup the SkyNZ TV channels but not the NZ Freeview ones.

These are the 2, I am trying to pick up:

Code: [Auswählen]
        new transponder: (S  f = 12456 kHz H SR = 22500  3/4 0,35  QPSK  (47:169:21)) 0x4043
        new transponder: (S  f = 12483 kHz H SR = 22500  3/4 0,35  QPSK  (47:169:22)) 0x4043

https://www.lyngsat.com/Optus-D2.html

Using the same sat dish connected to a GTMedia Nova 8 satellite receiver and a PCI DVB-S card, all channels are picked up. Only with the Sundtek USB stick can not pick up all the channels. Also tried with TVHEADEND and no services are picked up at all but works with the PCI card.

Anybody with the same issue in New Zealand?

Any idea what I can do to debug this?

Thanks

Seiten: [1]