Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - rosenrot

Seiten: [1] 2
1
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Anleitung - Sundtek Stick in Docker Container mit TVHeadend verfügbar machen
« am: August 01, 2019, 02:00:19 Nachmittag »
Vielen Dank für die Anleitung. Leider erhalte ich folgende Fehlermeldung bei der Installation im Docker Container:

Code: [Auswählen]
adding /opt/bin to environment paths
unpacking...
checking system... overriding SYSTEM parameter with armsysv
installing (netinstall mode) ...
Downloading architecture specific driver ... armsysv
Download finished, installing now ...
Starting driver...
./sundtek_netinst_testing.sh: line 1773: /conf/opt/bin/mediasrv: not found
done.
Die Datei ist dort vorhanden, aber ich kann sie nicht ausführen. Auch nicht manuell.

Code: [Auswählen]
root@cf85fef6ee45:/conf# ls -l /conf/opt/bin/
total 5245
drwxr-xr-x 2 root root    1024 Jul 31 16:35 audio
drwxr-xr-x 2 root root    1024 Jul 31 16:35 dvb
-rwxr-xr-x 1 root root     380 Jul 31 16:35 getinput.sh
-rwxr-xr-x 1 root root    1250 Jul 31 16:35 lirc.sh
-rwxr-xr-x 1 root root  357508 Jul 31 16:35 mediaclient
-rwsr-xr-x 1 root root 5006636 Jul 31 16:35 mediasrv
root@cf85fef6ee45:/conf# ./conf/opt/bin/mediasrv
bash: ./conf/opt/bin/mediasrv: No such file or directory

Ich verstehe dieses Problem nicht.

Ich bin im Chat!

2
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Treiber 190616 Verbindungsabbrüche
« am: Juni 18, 2019, 10:54:28 Nachmittag »
Vielen Dank für Deine Hilfe. Die Verbindungsabbrüche sind nicht mehr vorhanden. Ich erhalte nun allerdings vermehrt

H264 @ #255 Continuity counter error (total 2750)
AC3 @ #260 Continuity counter error (total 353)

in TVHeadend.

Die Signalqualität sieht gut aus:

Code: [Auswählen]
_10 MOD: QPSK VOLTAGE: H(18V) TONE: ON
SIGNAL: [............................     ] ( 85%) SATQUALITY:  66%  SNR:   8  BER:      0 FREQ: 12382500   Hz LOCKED: YES SYS: DVB-S2 SYM: 27500000 FEC: FEC_9_10 MOD: QPSK VOLTAGE: H(18V) TONE: ON

Ich bleibe dran.

3
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Treiber 190616 Verbindungsabbrüche
« am: Juni 18, 2019, 01:56:36 Nachmittag »
Klar, ich bin jetzt im Chat!

4
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Treiber 190616 Verbindungsabbrüche
« am: Juni 18, 2019, 09:27:18 Vormittag »
Das Netzteil ist nicht angesteckt, war es aber auch zuvor nicht und es lief problemlos.

Es handelt sich um ein Odroid N2.

Kann die Paketgrösse angepasst werden? Wie bekomme ich es wieder zu laufen?

5
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Treiber 190616 Verbindungsabbrüche
« am: Juni 18, 2019, 07:27:03 Vormittag »
Seit dem Update auf die Treiber Version 190616 verliert der SkyTV 8 direkt nach dem einschalten des Streams über TVHeadend die Verbindung.

Wie kann ich eine ältere Version des Treibers unter Kodi installieren?


Code: [Auswählen]
[  249.837144@3] usb 1-2: Product: eLight
[  249.837146@3] usb 1-2: Manufacturer: Sundtek
[  249.837148@3] usb 1-2: SerialNumber: U190406135620
[  249.869223@3] usb 1-2: Unsupported device
[  251.883264@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  251.883348@3] usb 1-2: USB disconnect, device number 104
[  252.131267@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  252.191196@3] usb 1-2: new high-speed USB device number 105 using xhci-hcd
[  252.309382@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  252.311206@3] usb 1-2: Device not responding to setup address.
[  252.519099@3] usb 1-2: Device not responding to setup address.
[  252.727016@3] usb 1-2: device not accepting address 105, error -71
[  252.994999@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  253.054949@3] usb 1-2: new high-speed USB device number 106 using xhci-hcd
[  253.200194@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  253.200199@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  253.200201@3] usb 1-2: Product: eLight
[  253.200203@3] usb 1-2: Manufacturer: Sundtek
[  253.200205@3] usb 1-2: SerialNumber: U190406135620
[  253.229271@3] usb 1-2: Unsupported device
[  253.841137@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  253.841213@3] usb 1-2: USB disconnect, device number 106
[  254.070678@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  254.130643@3] usb 1-2: new high-speed USB device number 107 using xhci-hcd
[  254.271856@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  254.271861@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  254.271863@3] usb 1-2: Product: eLight
[  254.271865@3] usb 1-2: Manufacturer: Sundtek
[  254.271866@3] usb 1-2: SerialNumber: U190406135620
[  254.285214@3] usb 1-2: Unsupported device
[  254.801513@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  254.801578@3] usb 1-2: USB disconnect, device number 107
[  255.030661@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  255.042761@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  255.090355@3] usb 1-2: new high-speed USB device number 108 using xhci-hcd
[  255.358285@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  255.418252@3] usb 1-2: device descriptor read/64, error -71
[  255.469622@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  255.794121@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  255.854105@3] usb 1-2: device descriptor read/64, error -71
[  256.082024@3] usb 1-2: new high-speed USB device number 109 using xhci-hcd
[  256.223256@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  256.223259@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  256.223261@3] usb 1-2: Product: eLight
[  256.223263@3] usb 1-2: Manufacturer: Sundtek
[  256.223264@3] usb 1-2: SerialNumber: U190406135620
[  256.237216@3] usb 1-2: Unsupported device
[  256.905389@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  256.905462@3] usb 1-2: USB disconnect, device number 109
[  257.109803@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  257.169753@3] usb 1-2: new high-speed USB device number 110 using xhci-hcd
[  257.310987@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  257.310993@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  257.310995@3] usb 1-2: Product: eLight
[  257.310996@3] usb 1-2: Manufacturer: Sundtek
[  257.310998@3] usb 1-2: SerialNumber: U190406135620
[  257.325212@3] usb 1-2: Unsupported device
[  257.413763@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  257.413826@3] usb 1-2: USB disconnect, device number 110
[  257.625630@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  257.685584@3] usb 1-2: new high-speed USB device number 111 using xhci-hcd
[  257.827073@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  257.827078@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  257.827080@3] usb 1-2: Product: eLight
[  257.827082@3] usb 1-2: Manufacturer: Sundtek
[  257.827083@3] usb 1-2: SerialNumber: U190406135620
[  257.837285@3] usb 1-2: Unsupported device
[  257.961764@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  257.961823@3] usb 1-2: USB disconnect, device number 111
[  258.169484@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  258.229417@3] usb 1-2: new high-speed USB device number 112 using xhci-hcd
[  258.362010@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  258.373546@3] usb 1-2: device descriptor read/all, error -71
[  258.641309@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  258.701266@3] usb 1-2: new high-speed USB device number 113 using xhci-hcd
[  258.842529@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  258.842533@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  258.842535@3] usb 1-2: Product: eLight
[  258.842537@3] usb 1-2: Manufacturer: Sundtek
[  258.842538@3] usb 1-2: SerialNumber: U190406135620
[  258.848623@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  258.893013@3] usb 1-2: can't set config #1, error -71
[  258.893091@3] usb 1-2: USB disconnect, device number 113
[  259.097204@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  259.153763@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  259.157147@3] usb 1-2: new high-speed USB device number 114 using xhci-hcd
[  259.425073@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  259.485055@3] usb 1-2: device descriptor read/64, error -71
[  259.717497@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  259.733165@3] usb 1-2: device descriptor read/all, error -71
[  259.733199@3] xhci-hcd xhci-hcd.0.auto: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[  259.733202@3] xhci-hcd xhci-hcd.0.auto: ep deq seg = ffffffc09a3a10c0, deq ptr = ffffff800883b150
[  260.000892@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  260.060865@3] usb 1-2: new high-speed USB device number 115 using xhci-hcd
[  260.202131@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  260.202134@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  260.202137@3] usb 1-2: Product: eLight
[  260.202138@3] usb 1-2: Manufacturer: Sundtek
[  260.202140@3] usb 1-2: SerialNumber: U190406135620
[  260.205247@3] usb 1-2: Unsupported device
[  260.255263@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  260.255763@3] usb 1-2: USB disconnect, device number 115
[  260.480798@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  260.544740@3] usb 1-2: new high-speed USB device number 116 using xhci-hcd
[  260.689908@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  260.689914@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  260.689916@3] usb 1-2: Product: eLight
[  260.689918@3] usb 1-2: Manufacturer: Sundtek
[  260.689919@3] usb 1-2: SerialNumber: U190406135620
[  260.717278@3] usb 1-2: Unsupported device
[  261.561010@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  261.561073@3] usb 1-2: USB disconnect, device number 116
[  261.792425@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  261.800762@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  261.852375@3] usb 1-2: new high-speed USB device number 117 using xhci-hcd
[  262.120301@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  262.180280@3] usb 1-2: device descriptor read/64, error -71
[  262.429502@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  262.429505@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  262.429508@3] usb 1-2: Product: eLight
[  262.429510@3] usb 1-2: Manufacturer: Sundtek
[  262.429511@3] usb 1-2: SerialNumber: U190406135620
[  262.445217@3] usb 1-2: Unsupported device
[  263.445386@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  263.445452@3] usb 1-2: USB disconnect, device number 117
[  263.675890@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  263.678627@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  263.735833@3] usb 1-2: new high-speed USB device number 118 using xhci-hcd
[  264.003761@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  264.063742@3] usb 1-2: device descriptor read/64, error -71
[  264.312944@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  264.312947@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  264.312949@3] usb 1-2: Product: eLight
[  264.312951@3] usb 1-2: Manufacturer: Sundtek
[  264.312952@3] usb 1-2: SerialNumber: U190406135620
[  264.333213@3] usb 1-2: Unsupported device
[  264.497761@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  264.498232@3] usb 1-2: USB disconnect, device number 118
[  264.743582@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  264.758389@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  264.807519@3] usb 1-2: new high-speed USB device number 119 using xhci-hcd
[  265.075475@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  265.135433@3] usb 1-2: device descriptor read/64, error -71
[  265.384672@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  265.384675@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  265.384677@3] usb 1-2: Product: eLight
[  265.384679@3] usb 1-2: Manufacturer: Sundtek
[  265.384681@3] usb 1-2: SerialNumber: U190406135620
[  265.389206@3] usb 1-2: Unsupported device
[  266.512012@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  266.512077@3] usb 1-2: USB disconnect, device number 119
[  266.751053@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  266.810971@3] usb 1-2: new high-speed USB device number 120 using xhci-hcd
[  266.956214@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  266.956219@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  266.956222@3] usb 1-2: Product: eLight
[  266.956224@3] usb 1-2: Manufacturer: Sundtek
[  266.956225@3] usb 1-2: SerialNumber: U190406135620
[  266.957201@3] usb 1-2: Unsupported device
[  267.021261@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  267.021333@3] usb 1-2: USB disconnect, device number 120
[  267.266861@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  267.326822@3] usb 1-2: new high-speed USB device number 121 using xhci-hcd
[  267.414262@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  267.446845@3] usb 1-2: Device not responding to setup address.
[  267.654746@3] usb 1-2: Device not responding to setup address.
[  267.862648@3] usb 1-2: device not accepting address 121, error -71
[  268.130588@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  268.190551@3] usb 1-2: new high-speed USB device number 122 using xhci-hcd
[  268.331822@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  268.331825@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  268.331827@3] usb 1-2: Product: eLight
[  268.331829@3] usb 1-2: Manufacturer: Sundtek
[  268.331831@3] usb 1-2: SerialNumber: U190406135620
[  268.333208@3] usb 1-2: Unsupported device
[  269.297132@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  269.297191@3] usb 1-2: USB disconnect, device number 122
[  269.530255@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  269.590201@3] usb 1-2: new high-speed USB device number 123 using xhci-hcd
[  269.669131@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  269.710195@3] usb 1-2: Device not responding to setup address.
[  269.918087@3] usb 1-2: Device not responding to setup address.
[  270.126016@3] usb 1-2: device not accepting address 123, error -71
[  270.393947@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  270.453919@3] usb 1-2: new high-speed USB device number 124 using xhci-hcd
[  270.595174@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  270.595177@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  270.595179@3] usb 1-2: Product: eLight
[  270.595181@3] usb 1-2: Manufacturer: Sundtek
[  270.595182@3] usb 1-2: SerialNumber: U190406135620
[  270.605209@3] usb 1-2: Unsupported device
[  270.657757@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  270.657839@3] usb 1-2: USB disconnect, device number 124
[  270.873917@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  270.903886@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  270.937801@3] usb 1-2: new high-speed USB device number 125 using xhci-hcd
[  271.205776@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  271.214501@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  271.265723@3] usb 1-2: device descriptor read/64, error -71
[  271.641601@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  271.701588@3] usb 1-2: device descriptor read/64, error -71
[  272.137468@3] usb 1-2: new high-speed USB device number 126 using xhci-hcd
[  272.231377@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  272.257477@3] usb 1-2: Device not responding to setup address.
[  272.465399@3] usb 1-2: Device not responding to setup address.
[  272.673311@3] usb 1-2: device not accepting address 126, error -71
[  272.673339@3] usb usb1-port2: attempt power cycle
[  273.257161@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  273.317130@3] usb 1-2: new high-speed USB device number 127 using xhci-hcd
[  273.338562@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  273.338564@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  273.338567@3] usb 1-2: Product: eLight
[  273.338569@3] usb 1-2: Manufacturer: Sundtek
[  273.338570@3] usb 1-2: SerialNumber: U190406135620
[  273.357252@3] usb 1-2: Unsupported device
[  274.531386@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  274.531451@3] usb 1-2: USB disconnect, device number 127
[  274.744800@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  274.753262@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  274.804746@3] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[  275.072678@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  275.085872@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  275.132662@3] usb 1-2: device descriptor read/64, error -71
[  275.508542@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  275.568531@3] usb 1-2: device descriptor read/64, error -71
[  275.796451@3] usb 1-2: new high-speed USB device number 5 using xhci-hcd
[  275.937784@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  275.937790@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  275.937792@3] usb 1-2: Product: eLight
[  275.937793@3] usb 1-2: Manufacturer: Sundtek
[  275.937795@3] usb 1-2: SerialNumber: U190406135620
[  275.949239@3] usb 1-2: Unsupported device
[  276.225388@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  276.225919@3] usb 1-2: USB disconnect, device number 5
[  276.444327@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  276.504282@3] usb 1-2: new high-speed USB device number 6 using xhci-hcd
[  276.636132@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  276.644428@3] usb 1-2: device descriptor read/all, error -71
[  276.644466@3] xhci-hcd xhci-hcd.0.auto: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[  276.644469@3] xhci-hcd xhci-hcd.0.auto: ep deq seg = ffffffc08e225900, deq ptr = ffffff800883b0c0
[  276.912162@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  276.972132@3] usb 1-2: new high-speed USB device number 7 using xhci-hcd
[  277.113390@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  277.113396@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  277.113398@3] usb 1-2: Product: eLight
[  277.113400@3] usb 1-2: Manufacturer: Sundtek
[  277.113401@3] usb 1-2: SerialNumber: U190406135620
[  277.133270@3] usb 1-2: Unsupported device
[  277.456890@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  277.456979@3] usb 1-2: USB disconnect, device number 7
[  277.687992@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  277.691638@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  277.747942@3] usb 1-2: new high-speed USB device number 8 using xhci-hcd
[  278.015879@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  278.075861@3] usb 1-2: device descriptor read/64, error -71
[  278.325066@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  278.325069@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  278.325071@3] usb 1-2: Product: eLight
[  278.325073@3] usb 1-2: Manufacturer: Sundtek
[  278.325075@3] usb 1-2: SerialNumber: U190406135620
[  278.349205@3] usb 1-2: Unsupported device
[  278.876512@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  278.876604@3] usb 1-2: USB disconnect, device number 8
[  279.099620@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  279.115262@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  279.159564@3] usb 1-2: new high-speed USB device number 9 using xhci-hcd
[  279.427499@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  279.487483@3] usb 1-2: device descriptor read/64, error -71
[  279.736610@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  279.736613@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  279.736615@3] usb 1-2: Product: eLight
[  279.736617@3] usb 1-2: Manufacturer: Sundtek
[  279.736619@3] usb 1-2: SerialNumber: U190406135620
[  279.757215@3] usb 1-2: Unsupported device
[  279.885140@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  279.885643@3] usb 1-2: USB disconnect, device number 9
[  280.123349@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  280.134512@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  280.183290@3] usb 1-2: new high-speed USB device number 10 using xhci-hcd
[  280.451251@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  280.511213@3] usb 1-2: device descriptor read/64, error -71
[  280.564622@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  280.887122@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  280.947085@3] usb 1-2: device descriptor read/64, error -71
[  281.175006@3] usb 1-2: new high-speed USB device number 11 using xhci-hcd
[  281.316317@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  281.316323@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  281.316325@3] usb 1-2: Product: eLight
[  281.316327@3] usb 1-2: Manufacturer: Sundtek
[  281.316329@3] usb 1-2: SerialNumber: U190406135620
[  281.325208@3] usb 1-2: Unsupported device
[  281.373258@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  281.373343@3] usb 1-2: USB disconnect, device number 11
[  281.598959@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  281.658895@3] usb 1-2: new high-speed USB device number 12 using xhci-hcd
[  281.808100@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  281.808105@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  281.808107@3] usb 1-2: Product: eLight
[  281.808109@3] usb 1-2: Manufacturer: Sundtek
[  281.808110@3] usb 1-2: SerialNumber: U190406135620
[  281.837273@3] usb 1-2: Unsupported device
[  281.977763@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  281.977826@3] usb 1-2: USB disconnect, device number 12
[  282.199381@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  282.258755@3] usb 1-2: new high-speed USB device number 13 using xhci-hcd
[  282.357888@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  282.379089@3] usb 1-2: Device not responding to setup address.
[  282.586673@3] usb 1-2: Device not responding to setup address.
[  282.794582@3] usb 1-2: device not accepting address 13, error -71
[  283.062524@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  283.102747@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  283.122494@3] usb 1-2: new high-speed USB device number 14 using xhci-hcd
[  283.390435@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  283.450427@3] usb 1-2: device descriptor read/64, error -71
[  283.537745@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  283.826348@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  283.886311@3] usb 1-2: device descriptor read/64, error -71
[  283.994282@3] usb usb1-port2: attempt power cycle
[  284.202264@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  284.578120@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  284.638092@3] usb 1-2: new high-speed USB device number 15 using xhci-hcd
[  284.659525@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  284.659528@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  284.659530@3] usb 1-2: Product: eLight
[  284.659532@3] usb 1-2: Manufacturer: Sundtek
[  284.659534@3] usb 1-2: SerialNumber: U190406135620
[  284.685213@3] usb 1-2: Unsupported device
[  284.754760@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  284.754814@3] usb 1-2: USB disconnect, device number 15
[  284.982052@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  285.042014@3] usb 1-2: new high-speed USB device number 16 using xhci-hcd
[  285.391177@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  285.391182@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  285.391184@3] usb 1-2: Product: eLight
[  285.391186@3] usb 1-2: Manufacturer: Sundtek
[  285.391188@3] usb 1-2: SerialNumber: U190406135620
[  285.421208@3] usb 1-2: Unsupported device
[  285.929639@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  285.929711@3] usb 1-2: USB disconnect, device number 16
[  286.133751@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  286.193698@3] usb 1-2: new high-speed USB device number 17 using xhci-hcd
[  286.273507@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  286.313711@3] usb 1-2: Device not responding to setup address.
[  286.521616@3] usb 1-2: Device not responding to setup address.
[  286.729547@3] usb 1-2: device not accepting address 17, error -71
[  286.997514@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  287.045133@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  287.057479@3] usb 1-2: new high-speed USB device number 18 using xhci-hcd
[  287.325405@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  287.385402@3] usb 1-2: device descriptor read/64, error -71
[  287.394006@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  287.765296@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  287.825281@3] usb 1-2: device descriptor read/64, error -71
[  287.933255@3] usb usb1-port2: attempt power cycle
[  288.141245@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  288.517088@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  288.577062@3] usb 1-2: new high-speed USB device number 19 using xhci-hcd
[  288.598502@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  288.598505@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  288.598507@3] usb 1-2: Product: eLight
[  288.598509@3] usb 1-2: Manufacturer: Sundtek
[  288.598511@3] usb 1-2: SerialNumber: U190406135620
[  288.621216@3] usb 1-2: Unsupported device
[  289.081887@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  289.081967@3] usb 1-2: USB disconnect, device number 19
[  289.308955@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  289.339388@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  289.368885@3] usb 1-2: new high-speed USB device number 20 using xhci-hcd
[  289.636817@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  289.696799@3] usb 1-2: device descriptor read/64, error -71
[  289.945981@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  289.945984@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  289.945986@3] usb 1-2: Product: eLight
[  289.945988@3] usb 1-2: Manufacturer: Sundtek
[  289.945990@3] usb 1-2: SerialNumber: U190406135620
[  289.965217@3] usb 1-2: Unsupported device
[  290.983261@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  290.983333@3] usb 1-2: USB disconnect, device number 20
[  291.192458@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  291.249515@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  291.252415@3] usb 1-2: new high-speed USB device number 21 using xhci-hcd
[  291.520328@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  291.580314@3] usb 1-2: device descriptor read/64, error -71
[  291.829507@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  291.829510@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  291.829512@3] usb 1-2: Product: eLight
[  291.829514@3] usb 1-2: Manufacturer: Sundtek
[  291.829516@3] usb 1-2: SerialNumber: U190406135620
[  291.853216@3] usb 1-2: Unsupported device
[  292.757013@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  292.757090@3] usb 1-2: USB disconnect, device number 21
[  292.987975@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  293.010512@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  293.047947@3] usb 1-2: new high-speed USB device number 22 using xhci-hcd
[  293.315873@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  293.375857@3] usb 1-2: device descriptor read/64, error -71
[  293.625076@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  293.625079@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  293.625081@3] usb 1-2: Product: eLight
[  293.625083@3] usb 1-2: Manufacturer: Sundtek
[  293.625085@3] usb 1-2: SerialNumber: U190406135620
[  293.645223@3] usb 1-2: Unsupported device
[  293.721385@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  293.721454@3] usb 1-2: USB disconnect, device number 22
[  293.943750@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  293.957885@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  294.003696@3] usb 1-2: new high-speed USB device number 23 using xhci-hcd
[  294.271670@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  294.304876@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  294.331620@3] usb 1-2: device descriptor read/64, error -71
[  294.707514@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  294.717246@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  294.767499@3] usb 1-2: device descriptor read/64, error -71
[  295.143402@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  295.149870@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  295.203372@3] usb 1-2: new high-speed USB device number 24 using xhci-hcd
[  295.471326@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  295.480745@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  295.531309@3] usb 1-2: device descriptor read/64, error -71
[  295.907207@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  295.967194@3] usb 1-2: device descriptor read/64, error -71
[  296.075168@3] usb usb1-port2: attempt power cycle
[  296.283159@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  296.659014@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  296.718988@3] usb 1-2: new high-speed USB device number 25 using xhci-hcd
[  296.723245@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--

6
{Single, Dual, Quad} Sundtek SkyTV Ultimate / SkyTV 8 standby minisatip
« am: Mai 16, 2019, 09:55:58 Nachmittag »
Wie kann ich herausfinden ob der SkyTV 8 in den Standby Modus wechselt? Ich verwende ihn gerade zusammen mit minisatip und habe das Gefühl dass der Adapter nicht in den Ruhezustand wechselt.

7
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Umschaltzeiten verkürzen
« am: Mai 04, 2019, 04:14:35 Nachmittag »
Ein weiteres Update:

Dieser Fehler kommt bereits während der Stream noch wunderbar läuft.

[12625.039821] usb 1-1.1: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 192 rq 187 len 1 ret -110
[12630.159825] usb 1-1.1: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 64 rq 187 len 1 ret -110
[12635.280114] usb 1-1.1: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 192 rq 187 len 1 ret -110
[12640.398875] usb 1-1.1: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 64 rq 187 len 1 ret -110
[12645.518649] usb 1-1.1: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 192 rq 187 len 1 ret -110
[12650.638734] usb 1-1.1: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 64 rq 187 len 1 ret -110

Sobald ich diesen Fehler sehe und einen Senderwechsel durchführen möchte läuft nichts mehr und ich muss den dvb-s2 abstecken und wieder anstecken. Bisher habe ich gedacht diese Fehler würde erst in dem Moment auftreten in dem nichts mehr funktioniert.

Ideen?

Ich habe gelesen, dass Error -110 aussagt, dass zuviel Strom gezogen wurde. Stimmt dies?

Warum wechselt der stick nicht von

LNBSUPPLY: USBPOWER

Auf ACPOWER wenn eine externe Stromversorgung angeschlossen ist? Kann dies erzwungen werden?

8
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Umschaltzeiten verkürzen
« am: Mai 04, 2019, 03:34:59 Nachmittag »
Gerade nochmal extern versorgt. Selbes Problem.

ir_disabled=1 hat bisher noch nichts gebracht.

root@odroid:~# mediaclient -e
**** List of Media Hardware Devices ****
device 0: [              eLight]  DVB-S/S2, REMOTE-CONTROL
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 1-1.1
  [SERIAL]:
     ID: U190406135620
  [DVB-S/S2]:
     FESTATUS: ACTIVE
     LNBVOLTAGE: DISABLED
     LNBSUPPLY: USBPOWER
     LNBSTATUS: OK
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

9
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Umschaltzeiten verkürzen
« am: Mai 04, 2019, 11:03:09 Vormittag »
Ich habe nun eine weitere odrdoid N2 box mit Ubuntu.

Wenn ich den skytv dvb-s2 nicht extern versorge erhalte, disconnected der usb adapter von zeit zu zeit.

[33102.540949@1] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 64 rq 187 len 1 ret -110
[33107.660708@1] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 192 rq 187 len 1 ret -110
[33112.780489@0] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 64 rq 187 len 1 ret -110
[33117.900321@0] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 192 rq 187 len 1 ret -110
[33123.019973@0] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 64 rq 187 len 1 ret -110

Dies passiert nicht wenn er extern versorgt wird.

Der dvb-s2 ist im moment über das mitgelieferte usb2.0 kabel verbunden. Kann der dvb-s2 mehr strom ziehen, wenn er über einen usb3.0 adapter oder direkt verbunden wird? usb3.0 könnte doch genug strom liefern.

10
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Umschaltzeiten verkürzen
« am: April 30, 2019, 10:55:25 Nachmittag »
Here you can see a dmesg. It shows the Sundtek disconnecting and some bad error of the mediasrv at the end. Is there something I could do?

http://ix.io/1HGF

I just tried to update the driver but I get an error message telling me "unsupported hardware"??

11
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Umschaltzeiten verkürzen
« am: April 20, 2019, 03:01:49 Nachmittag »
Netzteil wird verwendet. USB sollte gut verbunden sein.

12
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Umschaltzeiten verkürzen
« am: April 19, 2019, 10:01:39 Nachmittag »
Folgendes passiert auf meiner Coreelec box. Dies passierte einfach so während der Nutzung des DVB-S2.

Code: [Auswählen]
[33102.540949@1] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 64 rq 187 len 1 ret -110
[33107.660708@1] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 192 rq 187 len 1 ret -110
[33112.780489@0] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 64 rq 187 len 1 ret -110
[33117.900321@0] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 192 rq 187 len 1 ret -110
[33123.019973@0] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 64 rq 187 len 1 ret -110
[33128.139704@0] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 192 rq 187 len 1 ret -110
[33133.259494@0] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 64 rq 187 len 1 ret -110
[33138.379272@0] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 192 rq 187 len 1 ret -110
[33143.498948@0] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 64 rq 187 len 1 ret -110
[33148.618712@0] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 192 rq 187 len 1 ret -110

Kommt das von Coreelec oder ist dies ein anderes Problem?

13
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: Umschaltzeiten verkürzen
« am: April 18, 2019, 08:59:25 Nachmittag »
Danke für den Tipp mit der Umschaltzeit. Ich werde es mal mit Netzteil versuchen.

In Coreelec ist die Datei hier zu finden: /storage/.kodi/addons/driver.dvb.sundtek-mediatv/lib/libmediaclient.so


Wenn ich in den Treibereinstellungen das Suspend/restart erlaube dann verliert meine Box den Tuner nach einiger Zeit und er kommt nicht mehr zurück, erst nach dem Restart des Sundtek Addons. Mache ich etwas falsch oder weshalb ist dies so?

14
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re: DVB-S/S2 via Netzwerk (von Linux zu Linux/Windows)
« am: April 18, 2019, 10:23:09 Vormittag »
Die Links funktionieren leider nicht mehr?! Würde mich sehr interessieren.

15
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Umschaltzeiten verkürzen
« am: April 18, 2019, 10:11:47 Vormittag »
Ich habe den Sundtek Ultimate 8 DVB-S2 gestern erhalten und direkt gestestet. Es kommt mir vor als wären die Umschaltzeiten im Vergleich zu meiner alten billigen Box aus China relative lange. Habt ihr eine Idee was ich ändern könnte? Ist der SVB-S2 Stick USB3 fähig? Würde es etwas bringen die mitgelieferte Verlängerung (USB2) nicht zu nutzen?

Ich habe Coreelec mit TVH am laufen. Ich wollte minisatip ausprobieren aber erhalte leider folgenden Fehler:

[18/04 10:01:59.269 main]: trying to open
  • adapter 0 and frontend 0
    • [18/04 10:01:59.279 main]: Could not open /dev/dvb/adapter0/frontend0 in RW mode (fe: -1, dvr: -1) error 6: No such device or address

    Ideen sind willkommen.

Seiten: [1] 2