9
« am: September 30, 2015, 06:10:12 Nachmittag »
lsusb -t liefert
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
|__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 12M
|__ Port 1: Dev 3, If 1, Class=Vendor Specific Class, Driver=, 12M
|__ Port 1: Dev 3, If 2, Class=Vendor Specific Class, Driver=, 12M
|__ Port 1: Dev 3, If 3, Class=Vendor Specific Class, Driver=, 12M
|__ Port 1: Dev 3, If 4, Class=Vendor Specific Class, Driver=, 12M
|__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
der Sundtek ist hier gar nicht dabei?
Der Device ist aber vorhanden.
mediaclient -e liefert:
**** List of Media Hardware Devices ****
device 0: [MediaTV Digital Home III (EU)] DVB-C, DVB-T, DVB-T2, REMOTE-CONTROL
[INFO]:
STATUS: STANDBY
[BUS]:
ID: 2-1
[SERIAL]:
ID: U140310153439
[DVB-C]:
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
[DVB-T]:
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
[DVB-T2]:
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
[REMOTECONTROL]:
INPUT0: /dev/mediainput0