Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - redstorm

Seiten: [1]
1
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re:LNB No Signal Optus D1
« am: Mai 14, 2012, 07:49:49 Vormittag »
root@xbmc:/opt/bin# ./mediaclient --readsignal=2 -d /dev/dvb/adapter1/frontend0
== reading digital TV signal ==
SIGNAL: [..............................   ] ( 91%)  BER:      0 FREQ: 1706000    Hz LOCKED: YES SYS: DVB-S SYM: 22500000 FEC: FEC_3_4 VOLTAGE: H(18V) TONE: OFF
SIGNAL: [..............................   ] ( 91%)  BER:      0 FREQ: 1706000    Hz LOCKED: YES SYS: DVB-S SYM: 22500000 FEC: FEC_3_4 VOLTAGE: H(18V) TONE: OFF

Progress.. ill be back if i get stuck with the S2

2
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re:LNB No Signal Optus D1
« am: Mai 14, 2012, 07:39:17 Vormittag »
root@xbmc:/opt/bin# ./mediaclient --readsignal=2 -d /dev/dvb/adapter1/frontend0 --band UNIVERSAL
== reading digital TV signal ==
SIGNAL: [                                 ] (  0%)  BER:      0 FREQ: 12306000   Hz LOCKED:  NO SYS: DVB-S SYM: 22500000 FEC: FEC_3_4 VOLTAGE: H(18V) TONE: ON
SIGNAL: [                                 ] (  0%)  BER:      0 FREQ: 12306000   Hz LOCKED:  NO SYS: DVB-S SYM: 22500000 FEC: FEC_3_4 VOLTAGE: H(18V) TONE: ON

3
{Single, Dual, Quad} Sundtek SkyTV Ultimate / LNB No Signal Optus D1
« am: Mai 14, 2012, 07:27:08 Vormittag »
I have the 10750 dual throat LNB on a standard Sky dish and have followed the instructions hear on how to add the LNB settings to TVheadend. I've tested the output voltage on the sky decoder and on the DVB-S/S2 both to be 18Volts

http://www.geekzone.co.nz/forums.asp?forumid=84&topicid=96515

dvb_satconf.c

if(!strcmp(id, "Universal")) {
    *f_low    = 10750000;
    *f_hi     = 10750000;
    *f_switch = 10750000;
  }

The frontend status comes back with "No Signal", the mux info is from lyngsat
http://www.lyngsat.com/Optus-D1.html
12456 H DVB-S 22500-3/4
12483 H DVB-S 22500-3/4

adding 000 for tvheadend for kHz

any ideas, it looks like nothing coming back from the LNB but plug it back into sky and all is well...

root@xbmc:/opt/bin# ./mediaclient --readsignal=2 -d /dev/dvb/adapter1/frontend0
== reading digital TV signal ==
SIGNAL: [                                 ] (  0%)  BER:      0 FREQ: 1706000    Hz LOCKED:  NO SYS: DVB-S SYM: 22500000 FEC: FEC_3_4 VOLTAGE: H(18V) TONE: ON
SIGNAL: [                                 ] (  0%)  BER:      0 FREQ: 1706000    Hz LOCKED:  NO SYS: DVB-S SYM: 22500000 FEC: FEC_3_4 VOLTAGE: H(18V) TONE: ON


The LNB settings
To setup for 10,750MHz
●LNB Power:ON
●Set 22kHz Tone Use:Satellite/LNB switching
●Set Local Oscillator Low Band Frequency:10750MHz
●Set Local Oscillator High Band Frequency:11800MHz
●Enable 22kHz Tone at Orbital Position:156.0 East – Optus D2

 

Seiten: [1]