Autor Thema: Treiber 190616 Verbindungsabbrüche  (Gelesen 994 mal)

rosenrot

  • Newbie
  • *
  • Beiträge: 17
    • Profil anzeigen
Treiber 190616 Verbindungsabbrüche
« am: Juni 18, 2019, 07:27:03 Vormittag »
Seit dem Update auf die Treiber Version 190616 verliert der SkyTV 8 direkt nach dem einschalten des Streams über TVHeadend die Verbindung.

Wie kann ich eine ältere Version des Treibers unter Kodi installieren?


[  249.837144@3] usb 1-2: Product: eLight
[  249.837146@3] usb 1-2: Manufacturer: Sundtek
[  249.837148@3] usb 1-2: SerialNumber: U190406135620
[  249.869223@3] usb 1-2: Unsupported device
[  251.883264@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  251.883348@3] usb 1-2: USB disconnect, device number 104
[  252.131267@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  252.191196@3] usb 1-2: new high-speed USB device number 105 using xhci-hcd
[  252.309382@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  252.311206@3] usb 1-2: Device not responding to setup address.
[  252.519099@3] usb 1-2: Device not responding to setup address.
[  252.727016@3] usb 1-2: device not accepting address 105, error -71
[  252.994999@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  253.054949@3] usb 1-2: new high-speed USB device number 106 using xhci-hcd
[  253.200194@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  253.200199@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  253.200201@3] usb 1-2: Product: eLight
[  253.200203@3] usb 1-2: Manufacturer: Sundtek
[  253.200205@3] usb 1-2: SerialNumber: U190406135620
[  253.229271@3] usb 1-2: Unsupported device
[  253.841137@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  253.841213@3] usb 1-2: USB disconnect, device number 106
[  254.070678@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  254.130643@3] usb 1-2: new high-speed USB device number 107 using xhci-hcd
[  254.271856@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  254.271861@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  254.271863@3] usb 1-2: Product: eLight
[  254.271865@3] usb 1-2: Manufacturer: Sundtek
[  254.271866@3] usb 1-2: SerialNumber: U190406135620
[  254.285214@3] usb 1-2: Unsupported device
[  254.801513@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  254.801578@3] usb 1-2: USB disconnect, device number 107
[  255.030661@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  255.042761@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  255.090355@3] usb 1-2: new high-speed USB device number 108 using xhci-hcd
[  255.358285@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  255.418252@3] usb 1-2: device descriptor read/64, error -71
[  255.469622@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  255.794121@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  255.854105@3] usb 1-2: device descriptor read/64, error -71
[  256.082024@3] usb 1-2: new high-speed USB device number 109 using xhci-hcd
[  256.223256@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  256.223259@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  256.223261@3] usb 1-2: Product: eLight
[  256.223263@3] usb 1-2: Manufacturer: Sundtek
[  256.223264@3] usb 1-2: SerialNumber: U190406135620
[  256.237216@3] usb 1-2: Unsupported device
[  256.905389@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  256.905462@3] usb 1-2: USB disconnect, device number 109
[  257.109803@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  257.169753@3] usb 1-2: new high-speed USB device number 110 using xhci-hcd
[  257.310987@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  257.310993@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  257.310995@3] usb 1-2: Product: eLight
[  257.310996@3] usb 1-2: Manufacturer: Sundtek
[  257.310998@3] usb 1-2: SerialNumber: U190406135620
[  257.325212@3] usb 1-2: Unsupported device
[  257.413763@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  257.413826@3] usb 1-2: USB disconnect, device number 110
[  257.625630@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  257.685584@3] usb 1-2: new high-speed USB device number 111 using xhci-hcd
[  257.827073@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  257.827078@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  257.827080@3] usb 1-2: Product: eLight
[  257.827082@3] usb 1-2: Manufacturer: Sundtek
[  257.827083@3] usb 1-2: SerialNumber: U190406135620
[  257.837285@3] usb 1-2: Unsupported device
[  257.961764@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  257.961823@3] usb 1-2: USB disconnect, device number 111
[  258.169484@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  258.229417@3] usb 1-2: new high-speed USB device number 112 using xhci-hcd
[  258.362010@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  258.373546@3] usb 1-2: device descriptor read/all, error -71
[  258.641309@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  258.701266@3] usb 1-2: new high-speed USB device number 113 using xhci-hcd
[  258.842529@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  258.842533@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  258.842535@3] usb 1-2: Product: eLight
[  258.842537@3] usb 1-2: Manufacturer: Sundtek
[  258.842538@3] usb 1-2: SerialNumber: U190406135620
[  258.848623@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  258.893013@3] usb 1-2: can't set config #1, error -71
[  258.893091@3] usb 1-2: USB disconnect, device number 113
[  259.097204@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  259.153763@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  259.157147@3] usb 1-2: new high-speed USB device number 114 using xhci-hcd
[  259.425073@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  259.485055@3] usb 1-2: device descriptor read/64, error -71
[  259.717497@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  259.733165@3] usb 1-2: device descriptor read/all, error -71
[  259.733199@3] xhci-hcd xhci-hcd.0.auto: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[  259.733202@3] xhci-hcd xhci-hcd.0.auto: ep deq seg = ffffffc09a3a10c0, deq ptr = ffffff800883b150
[  260.000892@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  260.060865@3] usb 1-2: new high-speed USB device number 115 using xhci-hcd
[  260.202131@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  260.202134@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  260.202137@3] usb 1-2: Product: eLight
[  260.202138@3] usb 1-2: Manufacturer: Sundtek
[  260.202140@3] usb 1-2: SerialNumber: U190406135620
[  260.205247@3] usb 1-2: Unsupported device
[  260.255263@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  260.255763@3] usb 1-2: USB disconnect, device number 115
[  260.480798@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  260.544740@3] usb 1-2: new high-speed USB device number 116 using xhci-hcd
[  260.689908@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  260.689914@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  260.689916@3] usb 1-2: Product: eLight
[  260.689918@3] usb 1-2: Manufacturer: Sundtek
[  260.689919@3] usb 1-2: SerialNumber: U190406135620
[  260.717278@3] usb 1-2: Unsupported device
[  261.561010@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  261.561073@3] usb 1-2: USB disconnect, device number 116
[  261.792425@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  261.800762@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  261.852375@3] usb 1-2: new high-speed USB device number 117 using xhci-hcd
[  262.120301@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  262.180280@3] usb 1-2: device descriptor read/64, error -71
[  262.429502@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  262.429505@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  262.429508@3] usb 1-2: Product: eLight
[  262.429510@3] usb 1-2: Manufacturer: Sundtek
[  262.429511@3] usb 1-2: SerialNumber: U190406135620
[  262.445217@3] usb 1-2: Unsupported device
[  263.445386@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  263.445452@3] usb 1-2: USB disconnect, device number 117
[  263.675890@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  263.678627@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  263.735833@3] usb 1-2: new high-speed USB device number 118 using xhci-hcd
[  264.003761@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  264.063742@3] usb 1-2: device descriptor read/64, error -71
[  264.312944@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  264.312947@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  264.312949@3] usb 1-2: Product: eLight
[  264.312951@3] usb 1-2: Manufacturer: Sundtek
[  264.312952@3] usb 1-2: SerialNumber: U190406135620
[  264.333213@3] usb 1-2: Unsupported device
[  264.497761@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  264.498232@3] usb 1-2: USB disconnect, device number 118
[  264.743582@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  264.758389@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  264.807519@3] usb 1-2: new high-speed USB device number 119 using xhci-hcd
[  265.075475@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  265.135433@3] usb 1-2: device descriptor read/64, error -71
[  265.384672@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  265.384675@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  265.384677@3] usb 1-2: Product: eLight
[  265.384679@3] usb 1-2: Manufacturer: Sundtek
[  265.384681@3] usb 1-2: SerialNumber: U190406135620
[  265.389206@3] usb 1-2: Unsupported device
[  266.512012@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  266.512077@3] usb 1-2: USB disconnect, device number 119
[  266.751053@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  266.810971@3] usb 1-2: new high-speed USB device number 120 using xhci-hcd
[  266.956214@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  266.956219@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  266.956222@3] usb 1-2: Product: eLight
[  266.956224@3] usb 1-2: Manufacturer: Sundtek
[  266.956225@3] usb 1-2: SerialNumber: U190406135620
[  266.957201@3] usb 1-2: Unsupported device
[  267.021261@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  267.021333@3] usb 1-2: USB disconnect, device number 120
[  267.266861@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  267.326822@3] usb 1-2: new high-speed USB device number 121 using xhci-hcd
[  267.414262@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  267.446845@3] usb 1-2: Device not responding to setup address.
[  267.654746@3] usb 1-2: Device not responding to setup address.
[  267.862648@3] usb 1-2: device not accepting address 121, error -71
[  268.130588@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  268.190551@3] usb 1-2: new high-speed USB device number 122 using xhci-hcd
[  268.331822@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  268.331825@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  268.331827@3] usb 1-2: Product: eLight
[  268.331829@3] usb 1-2: Manufacturer: Sundtek
[  268.331831@3] usb 1-2: SerialNumber: U190406135620
[  268.333208@3] usb 1-2: Unsupported device
[  269.297132@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  269.297191@3] usb 1-2: USB disconnect, device number 122
[  269.530255@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  269.590201@3] usb 1-2: new high-speed USB device number 123 using xhci-hcd
[  269.669131@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  269.710195@3] usb 1-2: Device not responding to setup address.
[  269.918087@3] usb 1-2: Device not responding to setup address.
[  270.126016@3] usb 1-2: device not accepting address 123, error -71
[  270.393947@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  270.453919@3] usb 1-2: new high-speed USB device number 124 using xhci-hcd
[  270.595174@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  270.595177@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  270.595179@3] usb 1-2: Product: eLight
[  270.595181@3] usb 1-2: Manufacturer: Sundtek
[  270.595182@3] usb 1-2: SerialNumber: U190406135620
[  270.605209@3] usb 1-2: Unsupported device
[  270.657757@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  270.657839@3] usb 1-2: USB disconnect, device number 124
[  270.873917@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  270.903886@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  270.937801@3] usb 1-2: new high-speed USB device number 125 using xhci-hcd
[  271.205776@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  271.214501@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  271.265723@3] usb 1-2: device descriptor read/64, error -71
[  271.641601@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  271.701588@3] usb 1-2: device descriptor read/64, error -71
[  272.137468@3] usb 1-2: new high-speed USB device number 126 using xhci-hcd
[  272.231377@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  272.257477@3] usb 1-2: Device not responding to setup address.
[  272.465399@3] usb 1-2: Device not responding to setup address.
[  272.673311@3] usb 1-2: device not accepting address 126, error -71
[  272.673339@3] usb usb1-port2: attempt power cycle
[  273.257161@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  273.317130@3] usb 1-2: new high-speed USB device number 127 using xhci-hcd
[  273.338562@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  273.338564@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  273.338567@3] usb 1-2: Product: eLight
[  273.338569@3] usb 1-2: Manufacturer: Sundtek
[  273.338570@3] usb 1-2: SerialNumber: U190406135620
[  273.357252@3] usb 1-2: Unsupported device
[  274.531386@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  274.531451@3] usb 1-2: USB disconnect, device number 127
[  274.744800@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  274.753262@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  274.804746@3] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[  275.072678@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  275.085872@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  275.132662@3] usb 1-2: device descriptor read/64, error -71
[  275.508542@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  275.568531@3] usb 1-2: device descriptor read/64, error -71
[  275.796451@3] usb 1-2: new high-speed USB device number 5 using xhci-hcd
[  275.937784@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  275.937790@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  275.937792@3] usb 1-2: Product: eLight
[  275.937793@3] usb 1-2: Manufacturer: Sundtek
[  275.937795@3] usb 1-2: SerialNumber: U190406135620
[  275.949239@3] usb 1-2: Unsupported device
[  276.225388@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  276.225919@3] usb 1-2: USB disconnect, device number 5
[  276.444327@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  276.504282@3] usb 1-2: new high-speed USB device number 6 using xhci-hcd
[  276.636132@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  276.644428@3] usb 1-2: device descriptor read/all, error -71
[  276.644466@3] xhci-hcd xhci-hcd.0.auto: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[  276.644469@3] xhci-hcd xhci-hcd.0.auto: ep deq seg = ffffffc08e225900, deq ptr = ffffff800883b0c0
[  276.912162@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  276.972132@3] usb 1-2: new high-speed USB device number 7 using xhci-hcd
[  277.113390@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  277.113396@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  277.113398@3] usb 1-2: Product: eLight
[  277.113400@3] usb 1-2: Manufacturer: Sundtek
[  277.113401@3] usb 1-2: SerialNumber: U190406135620
[  277.133270@3] usb 1-2: Unsupported device
[  277.456890@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  277.456979@3] usb 1-2: USB disconnect, device number 7
[  277.687992@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  277.691638@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  277.747942@3] usb 1-2: new high-speed USB device number 8 using xhci-hcd
[  278.015879@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  278.075861@3] usb 1-2: device descriptor read/64, error -71
[  278.325066@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  278.325069@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  278.325071@3] usb 1-2: Product: eLight
[  278.325073@3] usb 1-2: Manufacturer: Sundtek
[  278.325075@3] usb 1-2: SerialNumber: U190406135620
[  278.349205@3] usb 1-2: Unsupported device
[  278.876512@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  278.876604@3] usb 1-2: USB disconnect, device number 8
[  279.099620@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  279.115262@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  279.159564@3] usb 1-2: new high-speed USB device number 9 using xhci-hcd
[  279.427499@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  279.487483@3] usb 1-2: device descriptor read/64, error -71
[  279.736610@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  279.736613@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  279.736615@3] usb 1-2: Product: eLight
[  279.736617@3] usb 1-2: Manufacturer: Sundtek
[  279.736619@3] usb 1-2: SerialNumber: U190406135620
[  279.757215@3] usb 1-2: Unsupported device
[  279.885140@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  279.885643@3] usb 1-2: USB disconnect, device number 9
[  280.123349@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  280.134512@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  280.183290@3] usb 1-2: new high-speed USB device number 10 using xhci-hcd
[  280.451251@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  280.511213@3] usb 1-2: device descriptor read/64, error -71
[  280.564622@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  280.887122@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  280.947085@3] usb 1-2: device descriptor read/64, error -71
[  281.175006@3] usb 1-2: new high-speed USB device number 11 using xhci-hcd
[  281.316317@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  281.316323@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  281.316325@3] usb 1-2: Product: eLight
[  281.316327@3] usb 1-2: Manufacturer: Sundtek
[  281.316329@3] usb 1-2: SerialNumber: U190406135620
[  281.325208@3] usb 1-2: Unsupported device
[  281.373258@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  281.373343@3] usb 1-2: USB disconnect, device number 11
[  281.598959@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  281.658895@3] usb 1-2: new high-speed USB device number 12 using xhci-hcd
[  281.808100@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  281.808105@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  281.808107@3] usb 1-2: Product: eLight
[  281.808109@3] usb 1-2: Manufacturer: Sundtek
[  281.808110@3] usb 1-2: SerialNumber: U190406135620
[  281.837273@3] usb 1-2: Unsupported device
[  281.977763@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  281.977826@3] usb 1-2: USB disconnect, device number 12
[  282.199381@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  282.258755@3] usb 1-2: new high-speed USB device number 13 using xhci-hcd
[  282.357888@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  282.379089@3] usb 1-2: Device not responding to setup address.
[  282.586673@3] usb 1-2: Device not responding to setup address.
[  282.794582@3] usb 1-2: device not accepting address 13, error -71
[  283.062524@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  283.102747@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  283.122494@3] usb 1-2: new high-speed USB device number 14 using xhci-hcd
[  283.390435@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  283.450427@3] usb 1-2: device descriptor read/64, error -71
[  283.537745@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  283.826348@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  283.886311@3] usb 1-2: device descriptor read/64, error -71
[  283.994282@3] usb usb1-port2: attempt power cycle
[  284.202264@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  284.578120@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  284.638092@3] usb 1-2: new high-speed USB device number 15 using xhci-hcd
[  284.659525@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  284.659528@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  284.659530@3] usb 1-2: Product: eLight
[  284.659532@3] usb 1-2: Manufacturer: Sundtek
[  284.659534@3] usb 1-2: SerialNumber: U190406135620
[  284.685213@3] usb 1-2: Unsupported device
[  284.754760@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  284.754814@3] usb 1-2: USB disconnect, device number 15
[  284.982052@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  285.042014@3] usb 1-2: new high-speed USB device number 16 using xhci-hcd
[  285.391177@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  285.391182@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  285.391184@3] usb 1-2: Product: eLight
[  285.391186@3] usb 1-2: Manufacturer: Sundtek
[  285.391188@3] usb 1-2: SerialNumber: U190406135620
[  285.421208@3] usb 1-2: Unsupported device
[  285.929639@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  285.929711@3] usb 1-2: USB disconnect, device number 16
[  286.133751@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  286.193698@3] usb 1-2: new high-speed USB device number 17 using xhci-hcd
[  286.273507@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  286.313711@3] usb 1-2: Device not responding to setup address.
[  286.521616@3] usb 1-2: Device not responding to setup address.
[  286.729547@3] usb 1-2: device not accepting address 17, error -71
[  286.997514@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  287.045133@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  287.057479@3] usb 1-2: new high-speed USB device number 18 using xhci-hcd
[  287.325405@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  287.385402@3] usb 1-2: device descriptor read/64, error -71
[  287.394006@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  287.765296@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  287.825281@3] usb 1-2: device descriptor read/64, error -71
[  287.933255@3] usb usb1-port2: attempt power cycle
[  288.141245@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  288.517088@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  288.577062@3] usb 1-2: new high-speed USB device number 19 using xhci-hcd
[  288.598502@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  288.598505@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  288.598507@3] usb 1-2: Product: eLight
[  288.598509@3] usb 1-2: Manufacturer: Sundtek
[  288.598511@3] usb 1-2: SerialNumber: U190406135620
[  288.621216@3] usb 1-2: Unsupported device
[  289.081887@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  289.081967@3] usb 1-2: USB disconnect, device number 19
[  289.308955@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  289.339388@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  289.368885@3] usb 1-2: new high-speed USB device number 20 using xhci-hcd
[  289.636817@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  289.696799@3] usb 1-2: device descriptor read/64, error -71
[  289.945981@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  289.945984@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  289.945986@3] usb 1-2: Product: eLight
[  289.945988@3] usb 1-2: Manufacturer: Sundtek
[  289.945990@3] usb 1-2: SerialNumber: U190406135620
[  289.965217@3] usb 1-2: Unsupported device
[  290.983261@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  290.983333@3] usb 1-2: USB disconnect, device number 20
[  291.192458@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  291.249515@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  291.252415@3] usb 1-2: new high-speed USB device number 21 using xhci-hcd
[  291.520328@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  291.580314@3] usb 1-2: device descriptor read/64, error -71
[  291.829507@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  291.829510@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  291.829512@3] usb 1-2: Product: eLight
[  291.829514@3] usb 1-2: Manufacturer: Sundtek
[  291.829516@3] usb 1-2: SerialNumber: U190406135620
[  291.853216@3] usb 1-2: Unsupported device
[  292.757013@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  292.757090@3] usb 1-2: USB disconnect, device number 21
[  292.987975@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  293.010512@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  293.047947@3] usb 1-2: new high-speed USB device number 22 using xhci-hcd
[  293.315873@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  293.375857@3] usb 1-2: device descriptor read/64, error -71
[  293.625076@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[  293.625079@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  293.625081@3] usb 1-2: Product: eLight
[  293.625083@3] usb 1-2: Manufacturer: Sundtek
[  293.625085@3] usb 1-2: SerialNumber: U190406135620
[  293.645223@3] usb 1-2: Unsupported device
[  293.721385@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  293.721454@3] usb 1-2: USB disconnect, device number 22
[  293.943750@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  293.957885@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  294.003696@3] usb 1-2: new high-speed USB device number 23 using xhci-hcd
[  294.271670@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  294.304876@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  294.331620@3] usb 1-2: device descriptor read/64, error -71
[  294.707514@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  294.717246@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  294.767499@3] usb 1-2: device descriptor read/64, error -71
[  295.143402@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  295.149870@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  295.203372@3] usb 1-2: new high-speed USB device number 24 using xhci-hcd
[  295.471326@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  295.480745@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  295.531309@3] usb 1-2: device descriptor read/64, error -71
[  295.907207@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  295.967194@3] usb 1-2: device descriptor read/64, error -71
[  296.075168@3] usb usb1-port2: attempt power cycle
[  296.283159@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[  296.659014@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[  296.718988@3] usb 1-2: new high-speed USB device number 25 using xhci-hcd
[  296.723245@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
« Letzte Änderung: Juni 18, 2019, 10:57:43 Nachmittag von rosenrot »

Sundtek

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 8047
    • Profil anzeigen
Re: Treiber 190616 Verbindungsabbrüche
« Antwort #1 am: Juni 18, 2019, 09:16:35 Vormittag »
Ist das Netzteil angeschlossen?

Ansonsten die USB Paketgröße hat sich im letzten Treiberupdate verändert damit diverse NAS Systeme damit funktionieren.
Was für ein Amlogic System ist das?
Failure is a good thing! I'll fix it

rosenrot

  • Newbie
  • *
  • Beiträge: 17
    • Profil anzeigen
Re: Treiber 190616 Verbindungsabbrüche
« Antwort #2 am: Juni 18, 2019, 09:27:18 Vormittag »
Das Netzteil ist nicht angesteckt, war es aber auch zuvor nicht und es lief problemlos.

Es handelt sich um ein Odroid N2.

Kann die Paketgrösse angepasst werden? Wie bekomme ich es wieder zu laufen?

Sundtek

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 8047
    • Profil anzeigen
Re: Treiber 190616 Verbindungsabbrüche
« Antwort #3 am: Juni 18, 2019, 01:09:51 Nachmittag »
Danke für die Information, kannst Du heute in den Chat kommen? Ich sah das du am Vormittag bereits dort warst da habe ich leider nicht auf den Chat geachtet
Failure is a good thing! I'll fix it

rosenrot

  • Newbie
  • *
  • Beiträge: 17
    • Profil anzeigen
Re: Treiber 190616 Verbindungsabbrüche
« Antwort #4 am: Juni 18, 2019, 01:56:36 Nachmittag »
Klar, ich bin jetzt im Chat!

Sundtek

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 8047
    • Profil anzeigen
Re: Treiber 190616 Verbindungsabbrüche
« Antwort #5 am: Juni 18, 2019, 10:21:44 Nachmittag »
Also aktueller Stand, das Problem ist nicht reproduzierbar, eventuell war das USB Kabel nicht "fest" angeschlossen. Falls es wieder auftritt einfach melden.
Failure is a good thing! I'll fix it

rosenrot

  • Newbie
  • *
  • Beiträge: 17
    • Profil anzeigen
Re: Treiber 190616 Verbindungsabbrüche
« Antwort #6 am: Juni 18, 2019, 10:54:28 Nachmittag »
Vielen Dank für Deine Hilfe. Die Verbindungsabbrüche sind nicht mehr vorhanden. Ich erhalte nun allerdings vermehrt

H264 @ #255 Continuity counter error (total 2750)
AC3 @ #260 Continuity counter error (total 353)

in TVHeadend.

Die Signalqualität sieht gut aus:

_10 MOD: QPSK VOLTAGE: H(18V) TONE: ON
SIGNAL: [............................     ] ( 85%) SATQUALITY:  66%  SNR:   8  BER:      0 FREQ: 12382500   Hz LOCKED: YES SYS: DVB-S2 SYM: 27500000 FEC: FEC_9_10 MOD: QPSK VOLTAGE: H(18V) TONE: ON

Ich bleibe dran.
« Letzte Änderung: Juni 18, 2019, 10:57:11 Nachmittag von rosenrot »

Sundtek

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 8047
    • Profil anzeigen
Re: Treiber 190616 Verbindungsabbrüche
« Antwort #7 am: Juni 19, 2019, 09:34:57 Vormittag »
Ich würde Dir vorschlagen das Netzteil zu verwenden.

Dein System-Netzteil hat 12V, eventuell ist der Wandler des ARM Boards für 12V -> 5V nicht für so eine Last ausgerichtet. Zudem testen schadet nicht damit man Vergleichswerte hat.

Du könntest versuchen eine Weiche beim System-Netzteil zu verwenden, damit das System-Netzteil den ARM und den Stick direkt mit 12V versorgt.
Die 12V beim Stick wird ja nur für den Betrieb des LNBs verwendet, der Stick an sich benötigt ca 200mA bei 5V (im warmen Zustand, im kalten Zustand 180mA).
Failure is a good thing! I'll fix it

Pampat2014

  • Newbie
  • *
  • Beiträge: 1
    • Profil anzeigen
Re: Treiber 190616 Verbindungsabbrüche
« Antwort #8 am: Juni 21, 2019, 05:36:01 Nachmittag »
Ich habe zb Probleme mit dem odroid, usb Verbindung bricht oft ab. Mach mal nen dmesg log.

Sundtek

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 8047
    • Profil anzeigen
Re: Treiber 190616 Verbindungsabbrüche
« Antwort #9 am: Juni 21, 2019, 06:53:09 Nachmittag »
Das scheint ein (behebbares) Problem mit dem USB Controller bzw. der Hardware zu sein.

Bitte folgendes:
1. genaue Bezeichnung des Netzteils online stellen, besser noch ein Foto vom gesamten Setup
2. uname -r und dmesg
Failure is a good thing! I'll fix it