Seit dem Update auf die Treiber Version 190616 verliert der SkyTV 8 direkt nach dem einschalten des Streams über TVHeadend die Verbindung.
Wie kann ich eine ältere Version des Treibers unter Kodi installieren?
[ 249.837144@3] usb 1-2: Product: eLight
[ 249.837146@3] usb 1-2: Manufacturer: Sundtek
[ 249.837148@3] usb 1-2: SerialNumber: U190406135620
[ 249.869223@3] usb 1-2: Unsupported device
[ 251.883264@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 251.883348@3] usb 1-2: USB disconnect, device number 104
[ 252.131267@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 252.191196@3] usb 1-2: new high-speed USB device number 105 using xhci-hcd
[ 252.309382@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 252.311206@3] usb 1-2: Device not responding to setup address.
[ 252.519099@3] usb 1-2: Device not responding to setup address.
[ 252.727016@3] usb 1-2: device not accepting address 105, error -71
[ 252.994999@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 253.054949@3] usb 1-2: new high-speed USB device number 106 using xhci-hcd
[ 253.200194@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 253.200199@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 253.200201@3] usb 1-2: Product: eLight
[ 253.200203@3] usb 1-2: Manufacturer: Sundtek
[ 253.200205@3] usb 1-2: SerialNumber: U190406135620
[ 253.229271@3] usb 1-2: Unsupported device
[ 253.841137@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 253.841213@3] usb 1-2: USB disconnect, device number 106
[ 254.070678@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 254.130643@3] usb 1-2: new high-speed USB device number 107 using xhci-hcd
[ 254.271856@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 254.271861@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 254.271863@3] usb 1-2: Product: eLight
[ 254.271865@3] usb 1-2: Manufacturer: Sundtek
[ 254.271866@3] usb 1-2: SerialNumber: U190406135620
[ 254.285214@3] usb 1-2: Unsupported device
[ 254.801513@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 254.801578@3] usb 1-2: USB disconnect, device number 107
[ 255.030661@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 255.042761@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 255.090355@3] usb 1-2: new high-speed USB device number 108 using xhci-hcd
[ 255.358285@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 255.418252@3] usb 1-2: device descriptor read/64, error -71
[ 255.469622@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 255.794121@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 255.854105@3] usb 1-2: device descriptor read/64, error -71
[ 256.082024@3] usb 1-2: new high-speed USB device number 109 using xhci-hcd
[ 256.223256@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 256.223259@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 256.223261@3] usb 1-2: Product: eLight
[ 256.223263@3] usb 1-2: Manufacturer: Sundtek
[ 256.223264@3] usb 1-2: SerialNumber: U190406135620
[ 256.237216@3] usb 1-2: Unsupported device
[ 256.905389@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 256.905462@3] usb 1-2: USB disconnect, device number 109
[ 257.109803@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 257.169753@3] usb 1-2: new high-speed USB device number 110 using xhci-hcd
[ 257.310987@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 257.310993@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 257.310995@3] usb 1-2: Product: eLight
[ 257.310996@3] usb 1-2: Manufacturer: Sundtek
[ 257.310998@3] usb 1-2: SerialNumber: U190406135620
[ 257.325212@3] usb 1-2: Unsupported device
[ 257.413763@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 257.413826@3] usb 1-2: USB disconnect, device number 110
[ 257.625630@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 257.685584@3] usb 1-2: new high-speed USB device number 111 using xhci-hcd
[ 257.827073@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 257.827078@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 257.827080@3] usb 1-2: Product: eLight
[ 257.827082@3] usb 1-2: Manufacturer: Sundtek
[ 257.827083@3] usb 1-2: SerialNumber: U190406135620
[ 257.837285@3] usb 1-2: Unsupported device
[ 257.961764@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 257.961823@3] usb 1-2: USB disconnect, device number 111
[ 258.169484@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 258.229417@3] usb 1-2: new high-speed USB device number 112 using xhci-hcd
[ 258.362010@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 258.373546@3] usb 1-2: device descriptor read/all, error -71
[ 258.641309@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 258.701266@3] usb 1-2: new high-speed USB device number 113 using xhci-hcd
[ 258.842529@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 258.842533@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 258.842535@3] usb 1-2: Product: eLight
[ 258.842537@3] usb 1-2: Manufacturer: Sundtek
[ 258.842538@3] usb 1-2: SerialNumber: U190406135620
[ 258.848623@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 258.893013@3] usb 1-2: can't set config #1, error -71
[ 258.893091@3] usb 1-2: USB disconnect, device number 113
[ 259.097204@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 259.153763@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 259.157147@3] usb 1-2: new high-speed USB device number 114 using xhci-hcd
[ 259.425073@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 259.485055@3] usb 1-2: device descriptor read/64, error -71
[ 259.717497@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 259.733165@3] usb 1-2: device descriptor read/all, error -71
[ 259.733199@3] xhci-hcd xhci-hcd.0.auto: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[ 259.733202@3] xhci-hcd xhci-hcd.0.auto: ep deq seg = ffffffc09a3a10c0, deq ptr = ffffff800883b150
[ 260.000892@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 260.060865@3] usb 1-2: new high-speed USB device number 115 using xhci-hcd
[ 260.202131@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 260.202134@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 260.202137@3] usb 1-2: Product: eLight
[ 260.202138@3] usb 1-2: Manufacturer: Sundtek
[ 260.202140@3] usb 1-2: SerialNumber: U190406135620
[ 260.205247@3] usb 1-2: Unsupported device
[ 260.255263@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 260.255763@3] usb 1-2: USB disconnect, device number 115
[ 260.480798@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 260.544740@3] usb 1-2: new high-speed USB device number 116 using xhci-hcd
[ 260.689908@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 260.689914@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 260.689916@3] usb 1-2: Product: eLight
[ 260.689918@3] usb 1-2: Manufacturer: Sundtek
[ 260.689919@3] usb 1-2: SerialNumber: U190406135620
[ 260.717278@3] usb 1-2: Unsupported device
[ 261.561010@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 261.561073@3] usb 1-2: USB disconnect, device number 116
[ 261.792425@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 261.800762@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 261.852375@3] usb 1-2: new high-speed USB device number 117 using xhci-hcd
[ 262.120301@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 262.180280@3] usb 1-2: device descriptor read/64, error -71
[ 262.429502@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 262.429505@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 262.429508@3] usb 1-2: Product: eLight
[ 262.429510@3] usb 1-2: Manufacturer: Sundtek
[ 262.429511@3] usb 1-2: SerialNumber: U190406135620
[ 262.445217@3] usb 1-2: Unsupported device
[ 263.445386@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 263.445452@3] usb 1-2: USB disconnect, device number 117
[ 263.675890@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 263.678627@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 263.735833@3] usb 1-2: new high-speed USB device number 118 using xhci-hcd
[ 264.003761@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 264.063742@3] usb 1-2: device descriptor read/64, error -71
[ 264.312944@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 264.312947@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 264.312949@3] usb 1-2: Product: eLight
[ 264.312951@3] usb 1-2: Manufacturer: Sundtek
[ 264.312952@3] usb 1-2: SerialNumber: U190406135620
[ 264.333213@3] usb 1-2: Unsupported device
[ 264.497761@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 264.498232@3] usb 1-2: USB disconnect, device number 118
[ 264.743582@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 264.758389@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 264.807519@3] usb 1-2: new high-speed USB device number 119 using xhci-hcd
[ 265.075475@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 265.135433@3] usb 1-2: device descriptor read/64, error -71
[ 265.384672@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 265.384675@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 265.384677@3] usb 1-2: Product: eLight
[ 265.384679@3] usb 1-2: Manufacturer: Sundtek
[ 265.384681@3] usb 1-2: SerialNumber: U190406135620
[ 265.389206@3] usb 1-2: Unsupported device
[ 266.512012@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 266.512077@3] usb 1-2: USB disconnect, device number 119
[ 266.751053@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 266.810971@3] usb 1-2: new high-speed USB device number 120 using xhci-hcd
[ 266.956214@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 266.956219@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 266.956222@3] usb 1-2: Product: eLight
[ 266.956224@3] usb 1-2: Manufacturer: Sundtek
[ 266.956225@3] usb 1-2: SerialNumber: U190406135620
[ 266.957201@3] usb 1-2: Unsupported device
[ 267.021261@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 267.021333@3] usb 1-2: USB disconnect, device number 120
[ 267.266861@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 267.326822@3] usb 1-2: new high-speed USB device number 121 using xhci-hcd
[ 267.414262@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 267.446845@3] usb 1-2: Device not responding to setup address.
[ 267.654746@3] usb 1-2: Device not responding to setup address.
[ 267.862648@3] usb 1-2: device not accepting address 121, error -71
[ 268.130588@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 268.190551@3] usb 1-2: new high-speed USB device number 122 using xhci-hcd
[ 268.331822@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 268.331825@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 268.331827@3] usb 1-2: Product: eLight
[ 268.331829@3] usb 1-2: Manufacturer: Sundtek
[ 268.331831@3] usb 1-2: SerialNumber: U190406135620
[ 268.333208@3] usb 1-2: Unsupported device
[ 269.297132@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 269.297191@3] usb 1-2: USB disconnect, device number 122
[ 269.530255@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 269.590201@3] usb 1-2: new high-speed USB device number 123 using xhci-hcd
[ 269.669131@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 269.710195@3] usb 1-2: Device not responding to setup address.
[ 269.918087@3] usb 1-2: Device not responding to setup address.
[ 270.126016@3] usb 1-2: device not accepting address 123, error -71
[ 270.393947@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 270.453919@3] usb 1-2: new high-speed USB device number 124 using xhci-hcd
[ 270.595174@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 270.595177@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 270.595179@3] usb 1-2: Product: eLight
[ 270.595181@3] usb 1-2: Manufacturer: Sundtek
[ 270.595182@3] usb 1-2: SerialNumber: U190406135620
[ 270.605209@3] usb 1-2: Unsupported device
[ 270.657757@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 270.657839@3] usb 1-2: USB disconnect, device number 124
[ 270.873917@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 270.903886@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 270.937801@3] usb 1-2: new high-speed USB device number 125 using xhci-hcd
[ 271.205776@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 271.214501@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 271.265723@3] usb 1-2: device descriptor read/64, error -71
[ 271.641601@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 271.701588@3] usb 1-2: device descriptor read/64, error -71
[ 272.137468@3] usb 1-2: new high-speed USB device number 126 using xhci-hcd
[ 272.231377@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 272.257477@3] usb 1-2: Device not responding to setup address.
[ 272.465399@3] usb 1-2: Device not responding to setup address.
[ 272.673311@3] usb 1-2: device not accepting address 126, error -71
[ 272.673339@3] usb usb1-port2: attempt power cycle
[ 273.257161@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 273.317130@3] usb 1-2: new high-speed USB device number 127 using xhci-hcd
[ 273.338562@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 273.338564@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 273.338567@3] usb 1-2: Product: eLight
[ 273.338569@3] usb 1-2: Manufacturer: Sundtek
[ 273.338570@3] usb 1-2: SerialNumber: U190406135620
[ 273.357252@3] usb 1-2: Unsupported device
[ 274.531386@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 274.531451@3] usb 1-2: USB disconnect, device number 127
[ 274.744800@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 274.753262@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 274.804746@3] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[ 275.072678@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 275.085872@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 275.132662@3] usb 1-2: device descriptor read/64, error -71
[ 275.508542@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 275.568531@3] usb 1-2: device descriptor read/64, error -71
[ 275.796451@3] usb 1-2: new high-speed USB device number 5 using xhci-hcd
[ 275.937784@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 275.937790@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 275.937792@3] usb 1-2: Product: eLight
[ 275.937793@3] usb 1-2: Manufacturer: Sundtek
[ 275.937795@3] usb 1-2: SerialNumber: U190406135620
[ 275.949239@3] usb 1-2: Unsupported device
[ 276.225388@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 276.225919@3] usb 1-2: USB disconnect, device number 5
[ 276.444327@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 276.504282@3] usb 1-2: new high-speed USB device number 6 using xhci-hcd
[ 276.636132@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 276.644428@3] usb 1-2: device descriptor read/all, error -71
[ 276.644466@3] xhci-hcd xhci-hcd.0.auto: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[ 276.644469@3] xhci-hcd xhci-hcd.0.auto: ep deq seg = ffffffc08e225900, deq ptr = ffffff800883b0c0
[ 276.912162@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 276.972132@3] usb 1-2: new high-speed USB device number 7 using xhci-hcd
[ 277.113390@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 277.113396@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 277.113398@3] usb 1-2: Product: eLight
[ 277.113400@3] usb 1-2: Manufacturer: Sundtek
[ 277.113401@3] usb 1-2: SerialNumber: U190406135620
[ 277.133270@3] usb 1-2: Unsupported device
[ 277.456890@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 277.456979@3] usb 1-2: USB disconnect, device number 7
[ 277.687992@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 277.691638@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 277.747942@3] usb 1-2: new high-speed USB device number 8 using xhci-hcd
[ 278.015879@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 278.075861@3] usb 1-2: device descriptor read/64, error -71
[ 278.325066@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 278.325069@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 278.325071@3] usb 1-2: Product: eLight
[ 278.325073@3] usb 1-2: Manufacturer: Sundtek
[ 278.325075@3] usb 1-2: SerialNumber: U190406135620
[ 278.349205@3] usb 1-2: Unsupported device
[ 278.876512@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 278.876604@3] usb 1-2: USB disconnect, device number 8
[ 279.099620@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 279.115262@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 279.159564@3] usb 1-2: new high-speed USB device number 9 using xhci-hcd
[ 279.427499@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 279.487483@3] usb 1-2: device descriptor read/64, error -71
[ 279.736610@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 279.736613@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 279.736615@3] usb 1-2: Product: eLight
[ 279.736617@3] usb 1-2: Manufacturer: Sundtek
[ 279.736619@3] usb 1-2: SerialNumber: U190406135620
[ 279.757215@3] usb 1-2: Unsupported device
[ 279.885140@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 279.885643@3] usb 1-2: USB disconnect, device number 9
[ 280.123349@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 280.134512@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 280.183290@3] usb 1-2: new high-speed USB device number 10 using xhci-hcd
[ 280.451251@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 280.511213@3] usb 1-2: device descriptor read/64, error -71
[ 280.564622@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 280.887122@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 280.947085@3] usb 1-2: device descriptor read/64, error -71
[ 281.175006@3] usb 1-2: new high-speed USB device number 11 using xhci-hcd
[ 281.316317@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 281.316323@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 281.316325@3] usb 1-2: Product: eLight
[ 281.316327@3] usb 1-2: Manufacturer: Sundtek
[ 281.316329@3] usb 1-2: SerialNumber: U190406135620
[ 281.325208@3] usb 1-2: Unsupported device
[ 281.373258@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 281.373343@3] usb 1-2: USB disconnect, device number 11
[ 281.598959@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 281.658895@3] usb 1-2: new high-speed USB device number 12 using xhci-hcd
[ 281.808100@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 281.808105@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 281.808107@3] usb 1-2: Product: eLight
[ 281.808109@3] usb 1-2: Manufacturer: Sundtek
[ 281.808110@3] usb 1-2: SerialNumber: U190406135620
[ 281.837273@3] usb 1-2: Unsupported device
[ 281.977763@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 281.977826@3] usb 1-2: USB disconnect, device number 12
[ 282.199381@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 282.258755@3] usb 1-2: new high-speed USB device number 13 using xhci-hcd
[ 282.357888@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 282.379089@3] usb 1-2: Device not responding to setup address.
[ 282.586673@3] usb 1-2: Device not responding to setup address.
[ 282.794582@3] usb 1-2: device not accepting address 13, error -71
[ 283.062524@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 283.102747@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 283.122494@3] usb 1-2: new high-speed USB device number 14 using xhci-hcd
[ 283.390435@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 283.450427@3] usb 1-2: device descriptor read/64, error -71
[ 283.537745@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 283.826348@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 283.886311@3] usb 1-2: device descriptor read/64, error -71
[ 283.994282@3] usb usb1-port2: attempt power cycle
[ 284.202264@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 284.578120@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 284.638092@3] usb 1-2: new high-speed USB device number 15 using xhci-hcd
[ 284.659525@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 284.659528@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 284.659530@3] usb 1-2: Product: eLight
[ 284.659532@3] usb 1-2: Manufacturer: Sundtek
[ 284.659534@3] usb 1-2: SerialNumber: U190406135620
[ 284.685213@3] usb 1-2: Unsupported device
[ 284.754760@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 284.754814@3] usb 1-2: USB disconnect, device number 15
[ 284.982052@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 285.042014@3] usb 1-2: new high-speed USB device number 16 using xhci-hcd
[ 285.391177@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 285.391182@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 285.391184@3] usb 1-2: Product: eLight
[ 285.391186@3] usb 1-2: Manufacturer: Sundtek
[ 285.391188@3] usb 1-2: SerialNumber: U190406135620
[ 285.421208@3] usb 1-2: Unsupported device
[ 285.929639@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 285.929711@3] usb 1-2: USB disconnect, device number 16
[ 286.133751@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 286.193698@3] usb 1-2: new high-speed USB device number 17 using xhci-hcd
[ 286.273507@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 286.313711@3] usb 1-2: Device not responding to setup address.
[ 286.521616@3] usb 1-2: Device not responding to setup address.
[ 286.729547@3] usb 1-2: device not accepting address 17, error -71
[ 286.997514@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 287.045133@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 287.057479@3] usb 1-2: new high-speed USB device number 18 using xhci-hcd
[ 287.325405@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 287.385402@3] usb 1-2: device descriptor read/64, error -71
[ 287.394006@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 287.765296@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 287.825281@3] usb 1-2: device descriptor read/64, error -71
[ 287.933255@3] usb usb1-port2: attempt power cycle
[ 288.141245@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 288.517088@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 288.577062@3] usb 1-2: new high-speed USB device number 19 using xhci-hcd
[ 288.598502@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 288.598505@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 288.598507@3] usb 1-2: Product: eLight
[ 288.598509@3] usb 1-2: Manufacturer: Sundtek
[ 288.598511@3] usb 1-2: SerialNumber: U190406135620
[ 288.621216@3] usb 1-2: Unsupported device
[ 289.081887@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 289.081967@3] usb 1-2: USB disconnect, device number 19
[ 289.308955@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 289.339388@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 289.368885@3] usb 1-2: new high-speed USB device number 20 using xhci-hcd
[ 289.636817@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 289.696799@3] usb 1-2: device descriptor read/64, error -71
[ 289.945981@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 289.945984@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 289.945986@3] usb 1-2: Product: eLight
[ 289.945988@3] usb 1-2: Manufacturer: Sundtek
[ 289.945990@3] usb 1-2: SerialNumber: U190406135620
[ 289.965217@3] usb 1-2: Unsupported device
[ 290.983261@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 290.983333@3] usb 1-2: USB disconnect, device number 20
[ 291.192458@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 291.249515@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 291.252415@3] usb 1-2: new high-speed USB device number 21 using xhci-hcd
[ 291.520328@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 291.580314@3] usb 1-2: device descriptor read/64, error -71
[ 291.829507@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 291.829510@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 291.829512@3] usb 1-2: Product: eLight
[ 291.829514@3] usb 1-2: Manufacturer: Sundtek
[ 291.829516@3] usb 1-2: SerialNumber: U190406135620
[ 291.853216@3] usb 1-2: Unsupported device
[ 292.757013@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 292.757090@3] usb 1-2: USB disconnect, device number 21
[ 292.987975@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 293.010512@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 293.047947@3] usb 1-2: new high-speed USB device number 22 using xhci-hcd
[ 293.315873@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 293.375857@3] usb 1-2: device descriptor read/64, error -71
[ 293.625076@3] usb 1-2: New USB device found, idVendor=2659, idProduct=1805
[ 293.625079@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 293.625081@3] usb 1-2: Product: eLight
[ 293.625083@3] usb 1-2: Manufacturer: Sundtek
[ 293.625085@3] usb 1-2: SerialNumber: U190406135620
[ 293.645223@3] usb 1-2: Unsupported device
[ 293.721385@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 293.721454@3] usb 1-2: USB disconnect, device number 22
[ 293.943750@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 293.957885@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 294.003696@3] usb 1-2: new high-speed USB device number 23 using xhci-hcd
[ 294.271670@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 294.304876@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 294.331620@3] usb 1-2: device descriptor read/64, error -71
[ 294.707514@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 294.717246@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 294.767499@3] usb 1-2: device descriptor read/64, error -71
[ 295.143402@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 295.149870@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 295.203372@3] usb 1-2: new high-speed USB device number 24 using xhci-hcd
[ 295.471326@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 295.480745@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 295.531309@3] usb 1-2: device descriptor read/64, error -71
[ 295.907207@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 295.967194@3] usb 1-2: device descriptor read/64, error -71
[ 296.075168@3] usb usb1-port2: attempt power cycle
[ 296.283159@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
[ 296.659014@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(1) tuning for host cf(xhci_hub_control)--
[ 296.718988@3] usb 1-2: new high-speed USB device number 25 using xhci-hcd
[ 296.723245@3] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Recovery port(1) tuning for host cf(xhci_irq)--
