Autor Thema: Probleme beim Zugriff mit minisatip unter aktuellem LibreELEC  (Gelesen 9348 mal)

sboldt

  • Newbie
  • *
  • Beiträge: 11
    • Profil anzeigen
Probleme beim Zugriff mit minisatip unter aktuellem LibreELEC
« am: März 22, 2019, 11:44:51 Nachmittag »
Hallo lieber Support,

ich versuche meinen Sudtek DVB-C Adapter unter LibreELEC auf einem Raspberry Pi3 ans laufen zu bringen. Leider bekomme ich die Folgende Fehlermeldung beim Start der Software:

Could not open /dev/dvb/adapter0/frontend0 in RW mode (fe: -1, dvr: -1) error 6: No such device or address

Den Treiber habe ich mit dem aktuellen Sundtek Treiber für OpenELEC aktualisiert, was allerdings leider nichts geändert hat. Gelockt von einer anderen Anwendung sein dürfte der Adapter nicht sein:

LibreELEC:~/driver.dvb.sundtek-mediatv/bin # ./mediaclient --lc
**** List of Media Clients ****
/dev/dvb/adapter0/frontend0:
  No client connected
/dev/dvb/adapter0/dvr0:
  No client connected
/dev/dvb/adapter0/demux0:
  No client connected
/dev/mediainput0:
  No client connected

Hier noch ein paar Daten zur Analys:

LibreELEC:~/driver.dvb.sundtek-mediatv/bin # ./mediaclient -e
**** List of Media Hardware Devices ****
device 0: [MediaTV Digital Home III (EU)]  DVB-C, DVB-T, DVB-T2, REMOTE-CONTROL
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 1-1.4
  [SERIAL]:
     ID: U170318151943
  [DVB-C]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [DVB-T]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [DVB-T2]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0

LibreELEC:~/driver.dvb.sundtek-mediatv/bin # /storage/.kodi/addons/service.minisatip/bin/minisatip -f -F /tmp/log -l satip,dvb  -x 9999 -R /storage/.kodi/addons/service.minisatip/webif
[22/03 22:40:04.806 main]: module satip not recognised
[22/03 22:40:04.807 main]: minisatip version 0.7.16, compiled with s2api version: 050B
[22/03 22:40:04.807 main]: Built with dvbcsa
[22/03 22:40:04.807 main]: Built with CI
[22/03 22:40:04.807 main]: Built with dvbapi
[22/03 22:40:04.808 main]: Built with AES (OpenSSL)
[22/03 22:40:04.808 main]: Built with tables processing
[22/03 22:40:04.808 main]: Built with pmt processing
[22/03 22:40:04.808 main]: Built with satip client
[22/03 22:40:04.808 main]: Built with linux dvb client
[22/03 22:40:04.808 main]: Built with backtrace
[22/03 22:40:04.808 main]: Built without netceiver
[22/03 22:40:04.809 main]: New UDP socket 3 bound to 0.0.0.0:1900
[22/03 22:40:04.809 main]: setting multicast for 239.255.255.250
[22/03 22:40:04.809 main]: New UDP socket 4 bound to 239.255.255.250:1900 (mcast:239.255.255.250)
[22/03 22:40:04.810 main]: Mutex init 0x174350
[22/03 22:40:04.810 main]: Mutex init 0x4524e0
[22/03 22:40:04.810 main]: sockets_add: handle 3 (type 0) returning socket sock 0 [0.0.0.0:0] read: 0xd324
[22/03 22:40:04.810 main]: Mutex init 0x454758
[22/03 22:40:04.810 main]: sockets_add: handle 4 (type 0) returning socket sock 1 [0.0.0.0:0] read: 0xd324
[22/03 22:40:04.810 main]: Mutex init 0x454868
[22/03 22:40:04.810 main]: sockets_add: handle 5 (type 2) returning socket sock 2 [0.0.0.0:0] read: 0xefa0
[22/03 22:40:04.810 main]: Mutex init 0x454978
[22/03 22:40:04.810 main]: sockets_add: handle 6 (type 2) returning socket sock 3 [0.0.0.0:0] read: 0xefa0
[22/03 22:40:04.810 main]: Mutex init 0x454a88
[22/03 22:40:04.810 main]: sockets_add: handle -2 (type 0) returning socket sock 4 [0.0.0.0:0] read: 0xd324
[22/03 22:40:04.811 main]: set_socket_thread: thread 76dd5260 for sockets 4
[22/03 22:40:04.811 main]: Mutex init 0x454b98
[22/03 22:40:04.811 main]: sockets_add: handle -2 (type 0) returning socket sock 5 [0.0.0.0:0] read: 0xd324
[22/03 22:40:04.811 main]: set_socket_thread: thread 76dd5260 for sockets 5
[22/03 22:40:04.811 signal]: Starting select_and_execute on thread ID 76dd5260, thread_name signal
[22/03 22:40:04.811 main]: Mutex init 0x174310
[22/03 22:40:04.811 main]: Mutex init 0x1741d0
[22/03 22:40:04.823 main]: Mutex init 0x174190
[22/03 22:40:04.823 main]: Mutex init 0x463228
[22/03 22:40:04.823 main]: sockets_add: handle -2 (type 0) returning socket sock 6 [0.0.0.0:0] read: 0xd324
[22/03 22:40:04.823 main]: Mutex init 0x1742d0
[22/03 22:40:04.823 main]: starting init_all_hw 0
[22/03 22:40:04.823 main]: Mutex init 0x174110
[22/03 22:40:04.823 main]: find_dvb_adapter: adding 0 0 to the list of devices
[22/03 22:40:04.885 main]: Mutex init 0x465ec8
[22/03 22:40:04.885 main]: trying to open [0] adapter 0 and frontend 0
[22/03 22:40:04.913 main]: Could not open /dev/dvb/adapter0/frontend0 in RW mode (fe: -1, dvr: -1) error 6: No such device or address
[22/03 22:40:04.913 main]: Opening adapter 0 failed with error 1
[22/03 22:40:04.913 main]: opening adapter 0 failed with exit code 1537
[22/03 22:40:04.914 main]: Failed to init device 0 with return value 1
[22/03 22:40:04.914 main]: done init_hw 0
[22/03 22:40:04.914 main]: Initializing with 0 devices
[22/03 22:40:04.914 main]: Starting select_and_execute on thread ID 76fa7010, thread_name main
[22/03 22:40:05.165 main]: Mutex init 0x464120
[22/03 22:40:05.165 main]: sockets_add: handle 7 (type 1) returning socket sock 7 [192.168.222.114:53625] read: 0xd2b4
[22/03 22:40:05.166 main]: read HTTP from 7 sid: -1:
[22/03 22:40:05.166 main]: reply -> 7 (192.168.222.114:53625) CL:1208 [sock_id 7]:
[22/03 22:40:05.170 main]: Mutex init 0x465b88
[22/03 22:40:05.171 main]: sockets_add: handle 8 (type 1) returning socket sock 8 [192.168.222.114:53627] read: 0xd2b4
[22/03 22:40:05.171 main]: read HTTP from 8 sid: -1:
...

LibreELEC:~/driver.dvb.sundtek-mediatv/bin # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.19.23 (jenkins@tsuboi) (gcc version 8.2.0 (GCC)) #1 SMP Thu Feb 21 04:04:42 CET 2019
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 8 MiB at 0x2f800000
[    0.000000] On node 0 totalpages: 196608
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:63
[    0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4a8 with crng_init=0
[    0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s41036 r8192 d24500 u73728
[    0.000000] pcpu-alloc: s41036 r8192 d24500 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 194880
[    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  boot=UUID=2102-0115 disk=UUID=d329bc25-f333-48f3-856f-419d8fa68360 quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 754556K/786432K available (9216K kernel code, 688K rwdata, 1988K rodata, 3072K init, 527K bss, 23684K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xb0800000 - 0xff800000   (1264 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xb0000000   ( 768 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (3072 kB)
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 689 kB)
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 528 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 29545 entries in 87 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000017] Switching to timer-based delay loop, resolution 52ns
[    0.000270] Console: colour dummy device 80x30
[    0.000295] console [tty0] enabled
[    0.000345] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
[    0.000368] pid_max: default: 32768 minimum: 301
[    0.000612] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000633] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001896] Disabling memory control group subsystem
[    0.001937] CPU: Testing write buffer coherency: ok
[    0.002486] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003353] Setting up static identity map for 0x100000 - 0x10003c
[    0.003536] rcu: Hierarchical SRCU implementation.
[    0.006239] smp: Bringing up secondary CPUs ...
[    0.007316] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.008419] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.009462] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.009621] smp: Brought up 1 node, 4 CPUs
[    0.009636] SMP: Total of 4 processors activated (153.00 BogoMIPS).
[    0.009646] CPU: All CPU(s) started in HYP mode.
[    0.009655] CPU: Virtualization extensions available.
[    0.010619] devtmpfs: initialized
[    0.023254] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.023543] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.023568] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.024195] pinctrl core: initialized pinctrl subsystem
[    0.025211] NET: Registered protocol family 16
[    0.028853] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.034040] cpuidle: using governor ladder
[    0.034085] cpuidle: using governor menu
[    0.034619] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.034631] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.034858] Serial: AMBA PL011 UART driver
[    0.038767] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.080457] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[    0.082453] SCSI subsystem initialized
[    0.082683] usbcore: registered new interface driver usbfs
[    0.082743] usbcore: registered new interface driver hub
[    0.082864] usbcore: registered new device driver usb
[    0.087885] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-02-12 19:46, variant start_x
[    0.090374] raspberrypi-firmware soc:firmware: Firmware hash is 8eff5e4023657a8b3b59e1f90dc966f62d74908c
[    0.095253] clocksource: Switched to clocksource arch_sys_counter
[    0.194185] FS-Cache: Loaded
[    0.205132] NET: Registered protocol family 2
[    0.205872] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.205916] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.206030] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.206220] TCP: Hash tables configured (established 8192 bind 8192)
[    0.206374] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.206425] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.206739] NET: Registered protocol family 1
[    0.207425] RPC: Registered named UNIX socket transport module.
[    0.207435] RPC: Registered udp transport module.
[    0.207445] RPC: Registered tcp transport module.
[    0.207454] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.363773] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.366402] Initialise system trusted keyrings
[    0.366600] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.376481] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.377331] FS-Cache: Netfs 'nfs' registered for caching
[    0.378136] NFS: Registering the id_resolver key type
[    0.378169] Key type id_resolver registered
[    0.378179] Key type id_legacy registered
[    0.378199] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.378721] FS-Cache: Netfs 'cifs' registered for caching
[    0.386767] Key type asymmetric registered
[    0.386782] Asymmetric key parser 'x509' registered
[    0.386851] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.386864] io scheduler noop registered (default)
[    0.386875] io scheduler deadline registered
[    0.387078] io scheduler cfq registered
[    0.387090] io scheduler mq-deadline registered
[    0.387101] io scheduler kyber registered
[    0.387272] io scheduler bfq registered
[    0.391802] BCM2708FB: allocated DMA memory 0xef850000
[    0.391837] BCM2708FB: allocated DMA channel 0
[    0.442129] Console: switching to colour frame buffer device 228x61
[    0.475370] bcm2835-rng 3f104000.rng: hwrng registered
[    0.475614] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.476246] vc-sm: Videocore shared memory driver
[    0.489139] brd: module loaded
[    0.489286] loop: module loaded
[    0.511807] usbcore: registered new interface driver rtsx_usb
[    0.511824] Loading iSCSI transport class v2.0-870.
[    0.512388] iscsi: registered transport (tcp)
[    0.512922] libphy: Fixed MDIO Bus: probed
[    0.512967] tun: Universal TUN/TAP device driver, 1.6
[    0.513238] usbcore: registered new interface driver lan78xx
[    0.513293] usbcore: registered new interface driver dm9601
[    0.513367] usbcore: registered new interface driver smsc95xx
[    0.513415] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.541428] dwc_otg 3f980000.usb: base=(ptrval)
[    0.741722] Core Release: 2.80a
[    0.741735] Setting default values for core params
[    0.741764] Finished setting default values for core params
[    0.942116] Using Buffer DMA mode
[    0.942127] Periodic Transfer Interrupt Enhancement - disabled
[    0.942136] Multiprocessor Interrupt Enhancement - disabled
[    0.942147] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.942170] Dedicated Tx FIFOs mode
[    0.942702] WARN::dwc_otg_hcd_init:1049: FIQ DMA bounce buffers: virt = af844000 dma = 0xef844000 len=9024
[    0.942731] FIQ FSM acceleration enabled for :
[    0.942731] Non-periodic Split Transactions
[    0.942731] Periodic Split Transactions
[    0.942731] High-Speed Isochronous Endpoints
[    0.942731] Interrupt/Control Split Transaction hack enabled
[    0.942743] dwc_otg: Microframe scheduler enabled
[    0.942806] WARN::hcd_init_fiq:457: FIQ on core 1
[    0.942817] WARN::hcd_init_fiq:458: FIQ ASM at 80722400 length 36
[    0.942828] WARN::hcd_init_fiq:484: MPHI regs_base at f0006000
[    0.942916] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.942955] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.942997] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[    0.943049] Init: Port Power? op_state=1
[    0.943059] Init: Power Port (0)
[    0.943426] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.943442] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.943456] usb usb1: Product: DWC OTG Controller
[    0.943469] usb usb1: Manufacturer: Linux 4.19.23 dwc_otg_hcd
[    0.943481] usb usb1: SerialNumber: 3f980000.usb
[    0.944176] hub 1-0:1.0: USB hub found
[    0.944236] hub 1-0:1.0: 1 port detected
[    0.944974] dwc_otg: FIQ enabled
[    0.944984] dwc_otg: NAK holdoff enabled
[    0.944993] dwc_otg: FIQ split-transaction FSM enabled
[    0.945007] Module dwc_common_port init
[    0.945346] usbcore: registered new interface driver usb-storage
[    0.945547] mousedev: PS/2 mouse device common for all mice
[    0.945982] i2c /dev entries driver
[    0.947879] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.948282] bcm2835-cpufreq: min=600000 max=1200000
[    0.949011] sdhci: Secure Digital Host Controller Interface driver
[    0.949020] sdhci: Copyright(c) Pierre Ossman
[    0.949557] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[    0.950118] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    0.950297] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.953459] ledtrig-cpu: registered to indicate activity on CPUs
[    0.953571] hidraw: raw HID events driver (C) Jiri Kosina
[    0.955053] usbcore: registered new interface driver usbhid
[    0.955057] usbhid: USB HID core driver
[    0.955618] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[    0.956825] [vc_sm_connected_init]: start
[    0.966501] [vc_sm_connected_init]: end - returning 0
[    0.968875] NET: Registered protocol family 10
[    0.970055] Segment Routing with IPv6
[    0.970145] NET: Registered protocol family 17
[    0.970279] Key type dns_resolver registered
[    0.970620] Registering SWP/SWPB emulation handler
[    0.971338] Loading compiled-in X.509 certificates
[    0.980236] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    0.980345] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[    0.983067] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    0.983081] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    1.008805] sdhost: log_buf @ (ptrval) (ef847000)
[    1.043051] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.044690] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.046415] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.049372] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.056793] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    1.058556] console [netcon0] enabled
[    1.058601] netconsole: network logging started
[    1.058611] of_cfs_init
[    1.058635] of_cfs_init: OK
[    1.069168] Freeing unused kernel memory: 3072K
[    1.092142] Run /init as init process
[    1.132601] random: fast init done
[    1.148698] Indeed it is in host mode hprt0 = 00021501
[    1.216554] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.221169] mmc0: new high speed SDXC card at address aaaa
[    1.221882] mmcblk0: mmc0:aaaa SL64G 59.5 GiB
[    1.225205]  mmcblk0: p1 p2
[    1.236546] mmc1: new high speed SDIO card at address 0001
[    1.331935] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.332034] Indeed it is in host mode hprt0 = 00001101
[    1.532262] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[    1.532278] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.532978] hub 1-1:1.0: USB hub found
[    1.533092] hub 1-1:1.0: 5 ports detected
[    1.811962] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.902248] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[    1.902264] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.904927] smsc95xx v1.0.6
[    1.959581] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:80:cd:08
[    2.165296] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[    2.286808] usb 1-1.3: New USB device found, idVendor=1784, idProduct=0004, bcdDevice= 1.00
[    2.286830] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.286843] usb 1-1.3: Product: USB RF Combo Device
[    2.286856] usb 1-1.3: Manufacturer: TopSeed Technology Corp.
[    2.305603] input: TopSeed Technology Corp. USB RF Combo Device  as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:1784:0004.0001/input/input0
[    2.362649] topseed 0003:1784:0004.0001: input,hidraw0: USB HID v1.00 Keyboard [TopSeed Technology Corp. USB RF Combo Device ] on usb-3f980000.usb-1.3/input0
[    2.394366] input: TopSeed Technology Corp. USB RF Combo Device  as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1784:0004.0002/input/input1
[    2.449205] topseed 0003:1784:0004.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [TopSeed Technology Corp. USB RF Combo Device ] on usb-3f980000.usb-1.3/input1
[    2.521949] usb 1-1.4: new high-speed USB device number 5 using dwc_otg
[    2.614984] usb 1-1.4: New USB device found, idVendor=2659, idProduct=1401, bcdDevice=40.01
[    2.614994] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.615001] usb 1-1.4: Product: MediaTV Digital Home III (EU)
[    2.615007] usb 1-1.4: Manufacturer: Sundtek
[    2.615014] usb 1-1.4: SerialNumber: U170318151943
[    2.798697] EXT4-fs (mmcblk0p2): recovery complete
[    2.803363] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.275764] systemd[1]: System time before build time, advancing clock.
[    3.284958] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[    3.285388] systemd[1]: Detected architecture arm.
[    3.287791] systemd[1]: Set hostname to <LibreELEC>.
[    3.428801] random: systemd: uninitialized urandom read (16 bytes read)
[    3.431873] systemd[1]: Starting Show Version...
[    3.432221] random: systemd: uninitialized urandom read (16 bytes read)
[    3.432793] systemd[1]: Created slice User and Session Slice.
[    3.432898] random: systemd: uninitialized urandom read (16 bytes read)
[    3.433419] systemd[1]: Listening on udev Control Socket.
[    3.433953] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.434216] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.435077] systemd[1]: Listening on Journal Socket.
[    3.437775] systemd[1]: Mounting Variable Directory...
[    3.613909] kernel-overlays-setup: setup base modules
[    3.674808] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.23
[    3.712396] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[    3.712593] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[    3.716406] kernel-overlays-setup: done
[    3.899244] systemd-journald[195]: Received request to flush runtime journal from PID 1
[    4.492922] random: crng init done
[    4.492934] random: 7 urandom warning(s) missed due to ratelimiting
[    4.974064] Console: switching to colour dummy device 80x30
[    5.106545] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    5.348721] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.362325] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.452874] input: eventlircd as /devices/virtual/input/input3
[    5.474008] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    5.474237] usbcore: registered new interface driver brcmfmac
[    5.718044] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    5.718144] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[    5.719313] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[    5.840091] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    5.840500] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.108222] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.108235] brcmfmac: power management disabled
[    6.117883] uart-pl011 3f201000.serial: no DMA platform data
[    7.305415] Under-voltage detected! (0x00050005)
[    7.820338] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    9.388484] input: Sundtek Remote Control as /devices/virtual/input/input4
[   10.858187] Bluetooth: Core ver 2.22
[   10.858347] NET: Registered protocol family 31
[   10.858353] Bluetooth: HCI device and connection manager initialized
[   10.858373] Bluetooth: HCI socket layer initialized
[   10.858391] Bluetooth: L2CAP socket layer initialized
[   10.858440] Bluetooth: SCO socket layer initialized
[   10.888155] Bluetooth: HCI UART driver ver 2.3
[   10.888168] Bluetooth: HCI UART protocol H4 registered
[   10.888277] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   10.888550] Bluetooth: HCI UART protocol Broadcom registered
[   30.773980] Voltage normalised (0x00000000)
[   49.975644] Under-voltage detected! (0x00050005)
[   62.776571] Voltage normalised (0x00000000)
[   64.910080] Under-voltage detected! (0x00050005)
[   69.176982] Voltage normalised (0x00000000)
[  170.377403] input: Sundtek Remote Control as /devices/virtual/input/input5

LibreELEC:~/driver.dvb.sundtek-mediatv/bin # cat /etc/issue
##############################################
#                 LibreELEC                  #
#            https://libreelec.tv            #
##############################################

LibreELEC (official): 9.0.1 (RPi2.arm)


Grüße
Stephan

sboldt

  • Newbie
  • *
  • Beiträge: 11
    • Profil anzeigen
Re: Probleme beim Zugriff mit minisatip unter aktuellem LibreELEC
« Antwort #1 am: März 22, 2019, 11:45:34 Nachmittag »
Hier noch die Ausgabe von lsof:


LibreELEC:~/driver.dvb.sundtek-mediatv/bin # lsof
1 /usr/lib/systemd/systemd /dev/null
1 /usr/lib/systemd/systemd /dev/null
1 /usr/lib/systemd/systemd /dev/null
1 /usr/lib/systemd/systemd socket:[14568]
1 /usr/lib/systemd/systemd /dev/kmsg
1 /usr/lib/systemd/systemd anon_inode:[eventpoll]
1 /usr/lib/systemd/systemd anon_inode:[signalfd]
1 /usr/lib/systemd/systemd anon_inode:inotify
1 /usr/lib/systemd/systemd /sys/fs/cgroup/unified
1 /usr/lib/systemd/systemd anon_inode:[timerfd]
1 /usr/lib/systemd/systemd socket:[8266]
1 /usr/lib/systemd/systemd anon_inode:[eventpoll]
1 /usr/lib/systemd/systemd anon_inode:inotify
1 /usr/lib/systemd/systemd /proc/1/mountinfo
1 /usr/lib/systemd/systemd anon_inode:inotify
1 /usr/lib/systemd/systemd /proc/swaps
1 /usr/lib/systemd/systemd socket:[8267]
1 /usr/lib/systemd/systemd socket:[8269]
1 /usr/lib/systemd/systemd socket:[8270]
1 /usr/lib/systemd/systemd socket:[8271]
1 /usr/lib/systemd/systemd socket:[8280]
1 /usr/lib/systemd/systemd socket:[8284]
1 /usr/lib/systemd/systemd anon_inode:inotify
1 /usr/lib/systemd/systemd socket:[8289]
1 /usr/lib/systemd/systemd socket:[8292]
1 /usr/lib/systemd/systemd anon_inode:[timerfd]
1 /usr/lib/systemd/systemd socket:[7102]
1 /usr/lib/systemd/systemd /run/initctl
1 /usr/lib/systemd/systemd socket:[8169]
1 /usr/lib/systemd/systemd socket:[8170]
1 /usr/lib/systemd/systemd socket:[8173]
1 /usr/lib/systemd/systemd socket:[8176]
1 /usr/lib/systemd/systemd anon_inode:inotify
1 /usr/lib/systemd/systemd socket:[1232]
1 /usr/lib/systemd/systemd anon_inode:bpf-map
1 /usr/lib/systemd/systemd anon_inode:bpf-map
1 /usr/lib/systemd/systemd anon_inode:bpf-prog
1 /usr/lib/systemd/systemd anon_inode:bpf-prog
1 /usr/lib/systemd/systemd socket:[1289]
1 /usr/lib/systemd/systemd anon_inode:bpf-map
1 /usr/lib/systemd/systemd anon_inode:bpf-map
1 /usr/lib/systemd/systemd anon_inode:bpf-prog
1 /usr/lib/systemd/systemd anon_inode:bpf-prog
1 /usr/lib/systemd/systemd socket:[11614]
1 /usr/lib/systemd/systemd socket:[11622]
1 /usr/lib/systemd/systemd socket:[11543]
1 /usr/lib/systemd/systemd socket:[11625]
1 /usr/lib/systemd/systemd socket:[11649]
1 /usr/lib/systemd/systemd anon_inode:bpf-map
1 /usr/lib/systemd/systemd anon_inode:bpf-map
1 /usr/lib/systemd/systemd anon_inode:bpf-prog
1 /usr/lib/systemd/systemd anon_inode:bpf-prog
1 /usr/lib/systemd/systemd socket:[13464]
1 /usr/lib/systemd/systemd socket:[13531]
1 /usr/lib/systemd/systemd socket:[11687]
1 /usr/lib/systemd/systemd socket:[11713]
1 /usr/lib/systemd/systemd socket:[11718]
1 /usr/lib/systemd/systemd socket:[11790]
1 /usr/lib/systemd/systemd socket:[13585]
1 /usr/lib/systemd/systemd socket:[13665]
1 /usr/lib/systemd/systemd socket:[14542]
195 /usr/lib/systemd/systemd-journald /dev/null
195 /usr/lib/systemd/systemd-journald /dev/null
195 /usr/lib/systemd/systemd-journald /dev/null
195 /usr/lib/systemd/systemd-journald socket:[8284]
195 /usr/lib/systemd/systemd-journald socket:[8289]
195 /usr/lib/systemd/systemd-journald socket:[8292]
195 /usr/lib/systemd/systemd-journald /dev/kmsg
195 /usr/lib/systemd/systemd-journald anon_inode:[eventpoll]
195 /usr/lib/systemd/systemd-journald /dev/kmsg
195 /usr/lib/systemd/systemd-journald /proc/sys/kernel/hostname
195 /usr/lib/systemd/systemd-journald anon_inode:[signalfd]
195 /usr/lib/systemd/systemd-journald anon_inode:[signalfd]
195 /usr/lib/systemd/systemd-journald anon_inode:[signalfd]
195 /usr/lib/systemd/systemd-journald socket:[11290]
195 /usr/lib/systemd/systemd-journald anon_inode:[timerfd]
195 /usr/lib/systemd/systemd-journald socket:[14542]
195 /usr/lib/systemd/systemd-journald socket:[11614]
195 /usr/lib/systemd/systemd-journald socket:[13464]
195 /usr/lib/systemd/systemd-journald socket:[11713]
195 /usr/lib/systemd/systemd-journald socket:[11687]
195 /usr/lib/systemd/systemd-journald socket:[13531]
195 /usr/lib/systemd/systemd-journald socket:[11543]
195 /usr/lib/systemd/systemd-journald socket:[11718]
195 /usr/lib/systemd/systemd-journald socket:[11790]
195 /usr/lib/systemd/systemd-journald socket:[13585]
195 /usr/lib/systemd/systemd-journald socket:[14568]
195 /usr/lib/systemd/systemd-journald socket:[13665]
195 /usr/lib/systemd/systemd-journald /run/log/journal/3266145df924ad5f144804955b2cd976/system@4959f9709843474e9728d11eb3e4c068-000000000000019f-00056f3919686f76.journal
195 /usr/lib/systemd/systemd-journald /run/log/journal/3266145df924ad5f144804955b2cd976/system.journal
222 /usr/bin/rpcbind /dev/null
222 /usr/bin/rpcbind socket:[10532]
222 /usr/bin/rpcbind socket:[10532]
222 /usr/bin/rpcbind socket:[7102]
222 /usr/bin/rpcbind socket:[8169]
222 /usr/bin/rpcbind socket:[8170]
222 /usr/bin/rpcbind socket:[8173]
222 /usr/bin/rpcbind socket:[8176]
222 /usr/bin/rpcbind /run/rpcbind.lock
222 /usr/bin/rpcbind socket:[1330]
222 /usr/bin/rpcbind socket:[1327]
222 /usr/bin/rpcbind socket:[1328]
238 /usr/lib/systemd/systemd-udevd /dev/null
238 /usr/lib/systemd/systemd-udevd socket:[1383]
238 /usr/lib/systemd/systemd-udevd socket:[1383]
238 /usr/lib/systemd/systemd-udevd socket:[1232]
238 /usr/lib/systemd/systemd-udevd socket:[8280]
238 /usr/lib/systemd/systemd-udevd socket:[1386]
238 /usr/lib/systemd/systemd-udevd /run/hwdb.bin
238 /usr/lib/systemd/systemd-udevd socket:[1388]
238 /usr/lib/systemd/systemd-udevd socket:[1389]
238 /usr/lib/systemd/systemd-udevd anon_inode:inotify
238 /usr/lib/systemd/systemd-udevd anon_inode:[eventpoll]
238 /usr/lib/systemd/systemd-udevd anon_inode:[signalfd]
238 /usr/lib/systemd/systemd-udevd anon_inode:[timerfd]
238 /usr/lib/systemd/systemd-udevd anon_inode:[timerfd]
252 /usr/bin/dbus-daemon /dev/null
252 /usr/bin/dbus-daemon socket:[10699]
252 /usr/bin/dbus-daemon socket:[10699]
252 /usr/bin/dbus-daemon socket:[11622]
252 /usr/bin/dbus-daemon anon_inode:[eventpoll]
252 /usr/bin/dbus-daemon anon_inode:inotify
252 /usr/bin/dbus-daemon socket:[1564]
252 /usr/bin/dbus-daemon socket:[1565]
252 /usr/bin/dbus-daemon socket:[1566]
252 /usr/bin/dbus-daemon socket:[1567]
252 /usr/bin/dbus-daemon socket:[13551]
252 /usr/bin/dbus-daemon socket:[13552]
252 /usr/bin/dbus-daemon socket:[13570]
252 /usr/bin/dbus-daemon socket:[13576]
252 /usr/bin/dbus-daemon socket:[1916]
252 /usr/bin/dbus-daemon socket:[1738]
252 /usr/bin/dbus-daemon socket:[1749]
252 /usr/bin/dbus-daemon socket:[1917]
252 /usr/bin/dbus-daemon socket:[1918]
252 /usr/bin/dbus-daemon socket:[1921]
252 /usr/bin/dbus-daemon socket:[1923]
257 /usr/lib/systemd/systemd-logind /dev/null
257 /usr/lib/systemd/systemd-logind socket:[12329]
257 /usr/lib/systemd/systemd-logind socket:[12329]
257 /usr/lib/systemd/systemd-logind socket:[1416]
257 /usr/lib/systemd/systemd-logind anon_inode:[eventpoll]
257 /usr/lib/systemd/systemd-logind anon_inode:[signalfd]
257 /usr/lib/systemd/systemd-logind anon_inode:[timerfd]
257 /usr/lib/systemd/systemd-logind /sys/devices/virtual/tty/tty0/active
257 /usr/lib/systemd/systemd-logind socket:[1419]
257 /usr/lib/systemd/systemd-logind socket:[1420]
257 /usr/lib/systemd/systemd-logind socket:[1424]
257 /usr/lib/systemd/systemd-logind socket:[1425]
257 /usr/lib/systemd/systemd-logind socket:[1426]
257 /usr/lib/systemd/systemd-logind anon_inode:[timerfd]
257 /usr/lib/systemd/systemd-logind /dev/tty6
257 /usr/lib/systemd/systemd-logind /dev/input/event0
257 /usr/lib/systemd/systemd-logind /dev/input/event1
257 /usr/lib/systemd/systemd-logind /dev/input/event3
257 /usr/lib/systemd/systemd-logind /run/systemd/inhibit/1.ref
258 /usr/sbin/eventlircd /dev/null
258 /usr/sbin/eventlircd socket:[12389]
258 /usr/sbin/eventlircd socket:[12389]
258 /usr/sbin/eventlircd socket:[1421]
258 /usr/sbin/eventlircd socket:[1423]
258 /usr/sbin/eventlircd /dev/input/event0
258 /usr/sbin/eventlircd /dev/input/event1
258 /usr/sbin/eventlircd /dev/uinput
258 /usr/sbin/eventlircd socket:[15715]
258 /usr/sbin/eventlircd socket:[15717]
260 /usr/bin/pulseaudio /dev/null
260 /usr/bin/pulseaudio socket:[12455]
260 /usr/bin/pulseaudio socket:[12455]
260 /usr/bin/pulseaudio pipe:[13543]
260 /usr/bin/pulseaudio pipe:[13543]
260 /usr/bin/pulseaudio pipe:[13544]
260 /usr/bin/pulseaudio pipe:[13544]
260 /usr/bin/pulseaudio socket:[1639]
260 /usr/bin/pulseaudio anon_inode:[eventfd]
260 /usr/bin/pulseaudio anon_inode:[eventfd]
260 /usr/bin/pulseaudio anon_inode:[eventfd]
260 /usr/bin/pulseaudio anon_inode:[eventfd]
260 /usr/bin/pulseaudio socket:[1643]
260 /usr/bin/pulseaudio socket:[1645]
260 /usr/bin/pulseaudio pipe:[1646]
260 /usr/bin/pulseaudio pipe:[1646]
260 /usr/bin/pulseaudio anon_inode:[eventfd]
260 /usr/bin/pulseaudio anon_inode:[eventfd]
260 /usr/bin/pulseaudio anon_inode:[eventfd]
260 /usr/bin/pulseaudio anon_inode:[eventfd]
260 /usr/bin/pulseaudio socket:[13569]
260 /usr/bin/pulseaudio socket:[1647]
260 /usr/bin/pulseaudio socket:[1648]
359 /usr/sbin/sshd /dev/null
359 /usr/sbin/sshd socket:[13530]
359 /usr/sbin/sshd socket:[13530]
359 /usr/sbin/sshd socket:[13559]
359 /usr/sbin/sshd socket:[13566]
360 /usr/bin/busybox /dev/null
360 /usr/bin/busybox socket:[13463]
360 /usr/bin/busybox socket:[13463]
360 /usr/bin/busybox socket:[13901]
364 /usr/sbin/connmand /dev/null
364 /usr/sbin/connmand /dev/null
364 /usr/sbin/connmand /dev/null
364 /usr/sbin/connmand anon_inode:[eventfd]
364 /usr/sbin/connmand anon_inode:[signalfd]
364 /usr/sbin/connmand socket:[11126]
364 /usr/sbin/connmand socket:[11127]
364 /usr/sbin/connmand /dev/urandom
364 /usr/sbin/connmand anon_inode:inotify
364 /usr/sbin/connmand anon_inode:inotify
364 /usr/sbin/connmand socket:[11131]
364 /usr/sbin/connmand /dev/rfkill
364 /usr/sbin/connmand socket:[13889]
364 /usr/sbin/connmand /dev/urandom
364 /usr/sbin/connmand socket:[13708]
364 /usr/sbin/connmand socket:[13896]
372 /usr/bin/wpa_supplicant /dev/null
372 /usr/bin/wpa_supplicant socket:[1734]
372 /usr/bin/wpa_supplicant socket:[1734]
372 /usr/bin/wpa_supplicant socket:[15438]
372 /usr/bin/wpa_supplicant socket:[13658]
372 /usr/bin/wpa_supplicant socket:[15439]
372 /usr/bin/wpa_supplicant socket:[15440]
372 /usr/bin/wpa_supplicant socket:[15441]
372 /usr/bin/wpa_supplicant socket:[15455]
372 /usr/bin/wpa_supplicant /dev/rfkill
372 /usr/bin/wpa_supplicant socket:[15445]
372 /usr/bin/wpa_supplicant socket:[15446]
376 /usr/sbin/avahi-daemon /dev/null
376 /usr/sbin/avahi-daemon socket:[15426]
376 /usr/sbin/avahi-daemon socket:[15426]
376 /usr/sbin/avahi-daemon socket:[15428]
376 /usr/sbin/avahi-daemon pipe:[15430]
376 /usr/sbin/avahi-daemon pipe:[15430]
376 /usr/sbin/avahi-daemon pipe:[15431]
376 /usr/sbin/avahi-daemon pipe:[15431]
376 /usr/sbin/avahi-daemon socket:[15432]
376 /usr/sbin/avahi-daemon socket:[15434]
376 /usr/sbin/avahi-daemon anon_inode:inotify
376 /usr/sbin/avahi-daemon socket:[15435]
376 /usr/sbin/avahi-daemon socket:[15436]
376 /usr/sbin/avahi-daemon socket:[15437]
399 /usr/bin/busybox /dev/null
399 /usr/bin/busybox socket:[14541]
399 /usr/bin/busybox socket:[14541]
399 /usr/bin/busybox /usr/lib/kodi/kodi.sh
404 /usr/lib/kodi/kodi.bin /dev/null
404 /usr/lib/kodi/kodi.bin socket:[14541]
404 /usr/lib/kodi/kodi.bin socket:[14541]
404 /usr/lib/kodi/kodi.bin /dev/vcsm
404 /usr/lib/kodi/kodi.bin /dev/vcio
404 /usr/lib/kodi/kodi.bin /proc/stat
404 /usr/lib/kodi/kodi.bin /sys/devices/virtual/thermal/thermal_zone0/temp
404 /usr/lib/kodi/kodi.bin /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq
404 /usr/lib/kodi/kodi.bin socket:[14544]
404 /usr/lib/kodi/kodi.bin /storage/.kodi/temp/kodi.log
404 /usr/lib/kodi/kodi.bin anon_inode:[eventpoll]
404 /usr/lib/kodi/kodi.bin anon_inode:[timerfd]
404 /usr/lib/kodi/kodi.bin socket:[14546]
404 /usr/lib/kodi/kodi.bin /dev/input/event2
404 /usr/lib/kodi/kodi.bin anon_inode:[eventpoll]
404 /usr/lib/kodi/kodi.bin socket:[15716]
404 /usr/lib/kodi/kodi.bin /storage/.kodi/userdata/Database/Addons27.db
404 /usr/lib/kodi/kodi.bin socket:[15736]
404 /usr/lib/kodi/kodi.bin socket:[15740]
404 /usr/lib/kodi/kodi.bin /run/systemd/inhibit/1.ref
404 /usr/lib/kodi/kodi.bin socket:[1919]
404 /usr/lib/kodi/kodi.bin anon_inode:[eventfd]
404 /usr/lib/kodi/kodi.bin /dev/vchiq
404 /usr/lib/kodi/kodi.bin socket:[13877]
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Regular.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Regular.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Regular.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Regular.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Regular.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Regular.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Regular.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Regular.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/Roboto-Thin.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Bold.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Bold.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Bold.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Bold.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Bold.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Bold.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Bold.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Bold.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Bold.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoSans-Bold.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/fonts/NotoMono-Regular.ttf
404 /usr/lib/kodi/kodi.bin /usr/share/kodi/addons/skin.estuary/media/Textures.xbt
404 /usr/lib/kodi/kodi.bin /storage/.kodi/userdata/Database/Textures13.db
404 /usr/lib/kodi/kodi.bin socket:[15765]
404 /usr/lib/kodi/kodi.bin socket:[13902]
404 /usr/lib/kodi/kodi.bin anon_inode:[eventfd]
404 /usr/lib/kodi/kodi.bin socket:[15777]
404 /usr/lib/kodi/kodi.bin socket:[15778]
404 /usr/lib/kodi/kodi.bin socket:[15767]
404 /usr/lib/kodi/kodi.bin socket:[15775]
404 /usr/lib/kodi/kodi.bin socket:[15799]
404 /usr/lib/kodi/kodi.bin socket:[15804]
404 /usr/lib/kodi/kodi.bin pipe:[15766]
404 /usr/lib/kodi/kodi.bin pipe:[15766]
404 /usr/lib/kodi/kodi.bin socket:[15769]
404 /usr/lib/kodi/kodi.bin socket:[15770]
404 /usr/lib/kodi/kodi.bin /dev/urandom
404 /usr/lib/kodi/kodi.bin socket:[15807]
404 /usr/lib/kodi/kodi.bin /storage/.kodi/userdata/Database/TV32.db
404 /usr/lib/kodi/kodi.bin socket:[15776]
404 /usr/lib/kodi/kodi.bin socket:[14580]
404 /usr/lib/kodi/kodi.bin pipe:[2000]
404 /usr/lib/kodi/kodi.bin pipe:[2000]
404 /usr/lib/kodi/kodi.bin socket:[2001]
404 /usr/lib/kodi/kodi.bin /storage/.kodi/userdata/Database/Epg12.db
404 /usr/lib/kodi/kodi.bin /dev/input/event3
457 /usr/bin/hciattach /dev/ttyAMA0
464 /usr/lib/bluetooth/bluetoothd /dev/null
464 /usr/lib/bluetooth/bluetoothd socket:[13862]
464 /usr/lib/bluetooth/bluetoothd socket:[13862]
464 /usr/lib/bluetooth/bluetoothd anon_inode:[eventfd]
464 /usr/lib/bluetooth/bluetoothd anon_inode:[signalfd]
464 /usr/lib/bluetooth/bluetoothd socket:[13863]
464 /usr/lib/bluetooth/bluetoothd socket:[13864]
464 /usr/lib/bluetooth/bluetoothd socket:[13866]
464 /usr/lib/bluetooth/bluetoothd socket:[13867]
464 /usr/lib/bluetooth/bluetoothd socket:[13868]
464 /usr/lib/bluetooth/bluetoothd socket:[14574]
464 /usr/lib/bluetooth/bluetoothd /dev/rfkill
464 /usr/lib/bluetooth/bluetoothd socket:[15741]
464 /usr/lib/bluetooth/bluetoothd socket:[15742]
464 /usr/lib/bluetooth/bluetoothd socket:[15743]
464 /usr/lib/bluetooth/bluetoothd socket:[15744]
464 /usr/lib/bluetooth/bluetoothd socket:[15745]
464 /usr/lib/bluetooth/bluetoothd socket:[15746]
464 /usr/lib/bluetooth/bluetoothd socket:[15747]
481 /usr/sbin/sshd /dev/null
481 /usr/sbin/sshd /dev/null
481 /usr/sbin/sshd /dev/null
481 /usr/sbin/sshd socket:[13897]
481 /usr/sbin/sshd pipe:[14587]
481 /usr/sbin/sshd pipe:[14587]
481 /usr/sbin/sshd socket:[15763]
481 /usr/sbin/sshd /dev/ptmx
481 /usr/sbin/sshd /dev/ptmx
481 /usr/sbin/sshd /dev/ptmx
508 /usr/bin/busybox /dev/pts/0
508 /usr/bin/busybox /dev/pts/0
508 /usr/bin/busybox /dev/pts/0
508 /usr/bin/busybox /dev/tty
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv /dev/null
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv /dev/null
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv /dev/null
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv socket:[15826]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[15827]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[15827]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv /var/log/mediasrv.log
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16386]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16386]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16387]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16387]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16388]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16388]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16389]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16389]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16390]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16392]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16392]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16391]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16393]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16393]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[13932]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv socket:[15828]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv socket:[15829]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[13932]
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv /dev/sundtek/usb/001/005
628 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv /dev/uinput
629 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv /dev/null
629 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv /dev/null
629 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv /dev/null
629 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[13930]
629 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[13930]
629 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[13931]
629 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv /var/log/mediasrv.log
629 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[13931]
629 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16390]
629 /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/mediasrv pipe:[16391]

sboldt

  • Newbie
  • *
  • Beiträge: 11
    • Profil anzeigen
Re: Probleme beim Zugriff mit minisatip unter aktuellem LibreELEC
« Antwort #2 am: März 22, 2019, 11:46:27 Nachmittag »
...und die Rechte dürften auch stimmen:

LibreELEC:~/driver.dvb.sundtek-mediatv/bin # ls -l /dev/dvb/adapter0/frontend0
crwxrwxrwx    1 root     root      212,   0 Mar 22 22:22 /dev/dvb/adapter0/frontend0

Sundtek

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 8604
    • Profil anzeigen
Re: Probleme beim Zugriff mit minisatip unter aktuellem LibreELEC
« Antwort #3 am: März 26, 2019, 01:33:35 Vormittag »
Was geben folgende Befehle aus:

Zitat
mediaclient --arch
file /bin/ls
Failure is a good thing! I'll fix it

sboldt

  • Newbie
  • *
  • Beiträge: 11
    • Profil anzeigen
Re: Probleme beim Zugriff mit minisatip unter aktuellem LibreELEC
« Antwort #4 am: April 07, 2019, 12:33:24 Vormittag »
LibreELEC:~ # mediaclient --arch
Architecture: armsysvhf
LibreELEC:~ # file /bin/ls
-sh: file: not found
LibreELEC:~ # ls -l /bin/ls
lrwxrwxrwx    1 root     root             7 Feb 21 05:13 /bin/ls -> busybox
« Letzte Änderung: April 07, 2019, 12:36:46 Vormittag von sboldt »

Sundtek

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 8604
    • Profil anzeigen
Re: Probleme beim Zugriff mit minisatip unter aktuellem LibreELEC
« Antwort #5 am: April 07, 2019, 06:36:05 Vormittag »
minisatip ist 64bit?
Failure is a good thing! I'll fix it

sboldt

  • Newbie
  • *
  • Beiträge: 11
    • Profil anzeigen
Re: Probleme beim Zugriff mit minisatip unter aktuellem LibreELEC
« Antwort #6 am: April 07, 2019, 01:25:27 Nachmittag »
minisatip ist 64bit?

Wie finde ich das heraus? Es ist die Version die beim aktuellen LibreELEC mitgeliefert wird...

Sundtek

  • Administrator
  • Hero Member
  • *****
  • Beiträge: 8604
    • Profil anzeigen
Re: Probleme beim Zugriff mit minisatip unter aktuellem LibreELEC
« Antwort #7 am: April 07, 2019, 04:15:22 Nachmittag »
Der einfachste weg wäre das minisatip binary an kontakt at sundtek de zu schicken.
Failure is a good thing! I'll fix it

sboldt

  • Newbie
  • *
  • Beiträge: 11
    • Profil anzeigen
Re: Probleme beim Zugriff mit minisatip unter aktuellem LibreELEC
« Antwort #8 am: April 07, 2019, 07:22:13 Nachmittag »
Der einfachste weg wäre das minisatip binary an kontakt at sundtek de zu schicken.

Hab die binary per mail an die angegebene Adresse geschickt.