USB dvb-c make tuner-b fail

[Pade2204]

Hi Sundtek,

I have connected my USB stick and it starts ok - I install the sundtek center.

Info on Vu+ - Tuner C is the USB stick and default registered as dvb-T:
https://www.dropbox.com/sc/xbq8rjw79vc1uo9/AAAlKXTe6f036rsa00z2Mu0Na

Tuner settings:
https://www.dropbox.com/sc/ai70a6kcce1y9yw/AACQupXkNdUFq4qKbAQP0N91a

Sundtek Controlcenter:
https://www.dropbox.com/sc/fdfgz6xlvnx7xr8/AAC5ISYq0kriC9T430d_5KPSa

My problem - when I go into tuner settings and set the TUNER C for dvb-c, only tuner A works. In other words tuner starts "Tuner failed"

Then when I unplug the USB stick it works again.


What should I do ?

Please help !

THANKS

[Sundtek]

What do you want to use DVB-C or DVB-T/T2?

[Pade2204]

I want to use dvb-C

So at the end I have 3 x dvb-c tuners.

[Sundtek]

Let me update our windows settopbox installer .. I think I can test it until 10pm today.
The device is in DVB-T2 mode so basically that's the reason.

[Pade2204]

OK.

When I go into Tuner Settings and put the TUNER-C into DVB-C thats where it fails.


Then the USB tuner works, but it makes TUNER-B fail!

I tried to update to latest Sundtek center as well - still same :/


The windows intaller is another way of installing driver and so on, through windows and not via plugins - correct ?

[Pade2204]

And thanks for taking the time in this late hours :-)

[Sundtek]

I just tested the Settopbox Installer and it works properly.
Try to use the Sundtek Settopbox Installer

Windows:
http://sundtek.de/media/ssi.rar
Mac::
http://sundtek.de/media/ssi_mac.zip

The Sundtek Controlcenter still needs some updates for VU+ boxes, originally it was made for Dreamboxes.
To delete the settings which were made by the sundtek controlcenter, delete /etc/sundtek.conf before using the Settopbox Installer.

[Pade2204]

Do I check all ?

Like this:
https://www.dropbox.com/s/walxs0k6qfyzm0s/Udklip.JPG

[Pade2204]

I installed everything (checked all)

Autostart tuner dvb-c  and so on.

But everything is still the same. (I deleted the Center plugin and the "/etc/sundtek.conf " file.


It starts up, and I see the USB tuner is dvb-t2

[Sundtek]

Ok, then we have to check it on VU+ Settopboxes seems like they work different here than Dreamboxes.
I'll check that tomorrow morning, just don't have any VU+ set up here at the moment.

[Pade2204]

Thats OK.

I will wait.

Thank you very much!

[Pade2204]

Any news about VU+ compability ?

:-)

[Sundtek]

Will be checked today.

[Pade2204]

OK, sounds good!

[Sundtek]

Can you update everything using the Settopbox Installer Application?

Does it work now?

You might have to switch the Tuner to DVB-C mode (if it is set to DVB-T2) in the Tuner Configuration

1. Tuner Configuration
2. Sundtek DVB-C
3. Tuner Type DVB-C

Done.

We just added a small update in order to support the Sundtek Control Center properly on VU+ systems.

However the tuner itself just works and worked fine.