Autor Thema: Re:Sundtek Media TV Pro Linux Installation Problem  (Gelesen 7217 mal)

GoranC

  • Newbie
  • *
  • Beiträge: 1
    • Profil anzeigen
Re:Sundtek Media TV Pro Linux Installation Problem
« am: November 14, 2009, 11:37:57 Vormittag »
Good day,

I hoped that it would work out like that. However, I get no connection with my newly purchased MediaTV Pro.

The installation of the drives looks ok:

# bash empia_installer_091016.sh

Welcome to the EETI em28xx linux driver setup

Legal notice:
This software comes without any warranty, use it at your own risk
Nutzungsbedingungen:
Sundtek übernimmt keinerlei Haftung für Schäden welche eventuell durch
das System oder die angebotenen Dateien entstehen können.

Do you want to continue [Y/N]:
Wollen Sie fortfahren [J/N]:
Y
stopping old driver instance...
installing em28xx driver to /opt
unpacking...
checking system... 32Bit System detected
installing...
finalizing configuration... (can take a few seconds) 
installing libmediaclient interception library
Starting driver...
done.

I also have the unit in the USB port:
 
# lsusb
Bus 005 Device 020: ID 
...
...


Hoever, mediaclient has no list of hardware:
# /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****

# /opt/bin/mediaclient --setdtvmode=DVBT
Using device: /dev/dvb/adapter0/frontend0
unable to open device node: /dev/dvb/adapter0/frontend0

(No /dev/dvb node is created.)

Could you please give some advice on how I can get this to work?

Yours,
           Goran

Edit Sundtek:
we replaced the device.
« Letzte Änderung: April 09, 2010, 12:30:01 Nachmittag von Sundtek »

kaspernase

  • Newbie
  • *
  • Beiträge: 7
    • Profil anzeigen
Jetzt bei Sundtek MediaTV Digital Home und Raspberry Pi
« Antwort #1 am: April 18, 2013, 01:47:59 Nachmittag »
Hallo,
mein Problem klingt genau so wie das hier schon geschilderte, deshalb antworte ich mal auf einen schon recht betagten Artikel.

Bei mir hat heute die Installation auf dem Raspberry Pi mit der sundtek_netinst.sh geklappt (zwar erst, nachdem ich Sie nicht wie vorgegeben nach /tmp, sondern nach /home geladen und dort ausgeführt habe - vorher gabs ein "Permission denied").

Jetzt ergibt:
root@raspbmc:/tmp# /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
root@raspbmc:/tmp#
also nix.

Nächster Versuch:
root@raspbmc:/# /opt/bin/mediaclient --setdtvmode=DVBT
Using device: /dev/dvb/adapter0/frontend0
unable to open device node: /dev/dvb/adapter0/frontend0
root@raspbmc:/#

Allerdings findet lsusb den Stick und gibt neben den anderen Geräten auch die Zeile

Bus 001 Device 010: ID eb1a:51b2 eMPIA Technology, Inc.
aus.

Das Verzeichnis /dev/dvb ist leer.

Also alles genau so wie schon im Ursprungsartikel.

Ich bin ziemlich ratlos, wie ich ihn jetzt noch ans Laufen bringe.

Wenn vor drei Jahren auch nur ein Austausch half - was könnte ich tun?

Schöne Grüße
Thomas

- - -

Once again,

I opened a new german thread here: http://support.sundtek.com/index.php/topic,1297.0.html
« Letzte Änderung: April 18, 2013, 04:06:45 Nachmittag von kaspernase »