Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - Tryon

Seiten: 1 2 [3]
31
Sundtek MediaTV Pro (Europe) / Option requires an argument
« am: März 13, 2016, 06:53:54 Nachmittag »
Thanks. That was only quote, but my intention was also to apply it for DVB-S?

Another small improvements include optional arguments for blindscan, readsignal, tsscan?

readsignal should use some default number of read times. It will stop without display when started without -d?

Code: [Auswählen]
[                           ] (  0%)   0%         0     0     0     NO     DVB-S  0   FEC_NONE  QPSK    OFF      OFF
[                           ] (  0%)   0%         0     0     0     NO     DVB-S  0   FEC_NONE  QPSK    OFF      OFF
SIGNAL:                             SATQUALITY   SNR   BER  FREQ  LOCKED    SYS  SYM    FEC     MOD    VOLTAGE   TONE

32
Drivers / Re:Linux driver 16. February 2016 (recommended)
« am: März 07, 2016, 12:59:53 Vormittag »
Hi!
I think it is recommended to update units in output of bandwidth check:
Code: [Auswählen]
[2011-10-02 11:18:33]    4444160 bytes |    4340.00 KiB |       4.24 MiB transferred

33
Wishlist / Complete Power Solutions
« am: Februar 28, 2016, 10:24:53 Nachmittag »
Zitat von: Sundtek am Februar 24, 2016, 08:25:21 Nachmittag
There is a drawback if you use a Y cable, the tuner will become warmer since the current is higher (it's usually no problem as long as you don't have passive LNB switches in between, and the worst thing that can happen is a thermal shutdown).
Hi!
There is also drawback when using AC adapter that some weird users will also need master/slave power strip to turn it off when not used.

In same time they might already have quality ATX PSU with up to 7 years warranty. Tuner can be placed inside some 5.25" bay storage box and powered from standard 4 pin molex. There are even similar brackets for external devices.

Delock 61824 - eSATAp(USB + 12V)?

And finally this option would help Raspberry Pi users to reduce number of (unnecessary) power supplies:
  • This 2A “laptop brick” supply outputs both 5V and 12VDC and is terminated with a 4-pin Molex connector.

34
Software / Re:Raspberry PI2/Openelec 6.0/MediaPro III : Freeze or "no data" after some hours
« am: Februar 28, 2016, 09:21:21 Nachmittag »
Zitat von: Want2Play am Januar 13, 2016, 03:51:05 Nachmittag
Now, if I want finish my multimedia center, It would be perfect to have the remote command to control it ;)
I reactive my other thread.
In my case there is some success with TV remote control(CEC support on Pi) :-\

35
Drivers / Re:MacOSX Driver 19. July 2015
« am: Februar 28, 2016, 04:39:43 Nachmittag »
MacOSX Installation
it would be easier to manual tune in file manager style console app similar to Setup mode of OpenPCtv

36
Sundtek MediaTV Pro (Europe) / Legacy readsignal
« am: Februar 28, 2016, 10:59:09 Vormittag »
Zitat von: cody_rocco
Code: [Auswählen]
root@home:/# /opt/bin/mediaclient  --scan-network
Scanning network for IPTV media servers
------------------------------------------------------------------------------
 IP address       | ID  |  devicename          | Users | Capabilities | Serial
------------------------------------------------------------------------------
 192.168.99.1     | 0   | Sundtek MediaTV Pro (USB 2.0)  |  0   | DVB-T, DVB-C | U111029013012
-  1 IPTV server found -------------------------------------------------------
if i'm setting manually the device, eq
Code: [Auswählen]
mediaclient -m DVBC -f 306000000 -S 6900000 -M Q64i'm able to use channels on that transponder.
progdvb will function correct.
another small improvements:
Code: [Auswählen]
Scanning network for IPTV media server

╔═══════════════╤═════╤══════════════════════════════════╤════════╤═════════════════╤═════════════════╗
║  IP address   │  ID │           devicename             │  Users │  Capabilities   │     Serial      ║
╠───────────────┼─────┼──────────────────────────────────┼────────┼─────────────────┼─────────────────╢
║ 192.168.99.1  │  0  │  Sundtek MediaTV Pro (USB 2.0)   │    2   │  DVB-T, DVB-C   │  U111029013012  ║
╠───────────────┴─────┴──────────────────────────────────┴────────┴─────────────────┴─────────────────╢
╙< - 1 IPTV server found >════════════════════════════════════════════════════════════════════════════╝

more importantly for DVB-S
Code: [Auswählen]
╔══════════════════════════════════╤══════════════════════════════════╗
║          Signal:   %             │            Quality:   %          ║
╠──────────────────────────────────┼──────────────────────────────────╢
║██████████████████████████████    │█████████████████████████         ║
╠──────────────────────────────────┴──────────────────────────────────╢
╙BER: 0.00E-           SNR:  dB
It should be easy to count number of chars(correct alignment even if IPv6 address)?

37
Sundtek MediaTV Pro (Europe) / Re:Sundtek Media TV Pro Linux Installation
« am: Februar 28, 2016, 10:40:52 Vormittag »
Zitat von: Sundtek
Code: [Auswählen]
$ /opt/bin/mediaclient -m DVBT -f 506000000 -b 8
Using device: /dev/dvb/adapter0/frontend0
Checking for lock:
. [LOCKED]
$ mplayer /dev/dvb/adapter0/dvr0
oder
$ cat /dev/dvb/adapter0/dvr0 | mplayer -cache 10240 -
DVB-C
Code: [Auswählen]
$ /opt/bin/mediaclient -m DVBC -f 113000000 -S 6900000 -M Q64
Using device: /dev/dvb/adapter0/frontend0
Checking for lock:
. [LOCKED]
one improvement could be accepting also 113 and 6900?

38
Wishlist / Quality Without Compromise
« am: Februar 24, 2016, 07:57:34 Nachmittag »
Every customer should be aware of setup and select appropriate option. Just like when one may select only Raspberry Pi or bundle/kit.

There is no need to pay adapter which will never be used!

Zitat von: Sundtek am Februar 22, 2016, 02:20:51 Vormittag
If the usb port is not able to provide enough power for the LNB the AC adapter will be needed.
Before using AC adapter, user may try to use Y cable
  • Delock 65306
User may get additional ports from mobo by bracket or front panel hub.

AC adapter comes after all above options. Of course, only highly reliable one like:
GST18A12-P1J

Power cord provided by user anywhere in the world.

39
Wishlist / Re:Optional AC Adapter
« am: Februar 23, 2016, 09:04:21 Nachmittag »
Thank you for reply.

Idea is not to ship AC adapter in above cases.

My other concern is that currently chosen adapter is not best option for possible power surges and unwanted EMI.

Is tuner protected from that?
  • Transil for low noise block protection
  • USB 2.0 A Male to Female Cable w/ Ferrite-Core

Additionality, it would be good to warn users in pdf FAQ about importance of this:
http://www.spaun.de/?lang=en&modul=faq&category=1&id=1c6c3#1c6c3

40
Wishlist / Optional AC Adapter
« am: Februar 22, 2016, 02:06:19 Vormittag »
Hi!

That adapter is not needed for all SkytV users and those who need it can order one of higher quality?

41
Drivers / auto-detect the language of the OS
« am: Februar 22, 2016, 02:05:48 Vormittag »
Zitat von: Sundtek am März 19, 2012, 07:12:54 Vormittag
As we are moving forward quickly with this it's work in progress, if you have any issues with it please let us know!
Hi!
Maybe it would be good idea to use translated version when detected OS language is not DE?

Seiten: 1 2 [3]