16
Beiträge anzeigen
Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.
17
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Jump Around: Bad reception or something else?
« am: Mai 23, 2020, 12:24:11 Vormittag »
I can confirm that strong wind/thunderstorm can cause this:
Hi,It would be much easier to adjust with some kind web app which should display all info in large font on tablet! What SNR we should target/be satisfied with? 14?
I have a Sundtek SkyTV Ultimate (Single) receiver, and the ammount of channels I'm able to tune in have been degraded quite considerably during the last months, which makes me believe that my antenna just shifted and needs readjustments.Code: [Auswählen]SIGNAL: [.............................. ] ( 90%)
SATQUALITY: 60% SNR: 6 BER: 0 LOCKED: YES
IF FREQ: 1704.5 MHz SYM: 27.5 MS/s POL: H
DEL SYS: DVB-S2 MOD: QPSK FEC_9_10 BAND: High
How can I interpret the singal strength results here? Is it a good reception or not? Could it be the LNB or Dish related? Noise? Or just bad software settings? Any ideas or extra input?
18
Sundtek MediaTV Pro (Europe) / Re: CAM / CI
« am: Dezember 26, 2018, 04:30:06 Nachmittag »
Similarly, we have lost hope that national broadcaster will switch to HD. Apparently, they will do it without much fanfare on satellite.
I have discovered that it is possible to use certain CI bridge with any tuner. There was even now dead DVBLink CI4All Edition.
It seems there is disadvantage because every app need to support it.
I have discovered that it is possible to use certain CI bridge with any tuner. There was even now dead DVBLink CI4All Edition.
It seems there is disadvantage because every app need to support it.
19
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re:HEVC on Sundtek
« am: Oktober 27, 2017, 04:39:07 Nachmittag »This is not hevc, this is still h264 (the codec is totally unrelated to this anyway)
Ok tks for the replyConclusion of this topic is that HEVC can be used for any resolution. In this case it will work only on UNO4k/Ultimo4k/Solo4k...
but now i cannot watch videos.. only audio on on Vu+
is my also needed an upgrade???
20
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Improve output
« am: September 16, 2017, 03:15:47 Nachmittag »
User may be confused by 12207(000)000 (k)Hz 
Code: [Auswählen]SIGNAL: [ ] ( 0%) QUALITY:0% SNR:0 BER: 0 FREQ: 12207 MHz LOCKED:NO SYS: DVB-S SYM: 27500 FEC: FEC_5_6 MOD: QPSK VOLTAGE: V(13V) TONE: ON
SIGNAL: [ ] ( 0%) SATQUALITY: 0% SNR: 0 BER: 0 FREQ: 12207000 Hz LOCKED: NO SYS: DVB-S SYM: 27500000 FEC: FEC_5_6 MOD: QPSK VOLTAGE: V(13V) TONE: ON
21
Sundtek Streaming Server / Re:Sundtek Streaming Server (Englisch / English)
« am: April 23, 2017, 06:30:16 Nachmittag »
It also seems that server use wrong address(localhost) when using UPnP feature of VLC from another computer.
It would be useful if server can announce availability of channels from current mux when first VLC is streaming(second VLC will only be able to tune to channels of current mux)
It would be useful if server can announce availability of channels from current mux when first VLC is streaming(second VLC will only be able to tune to channels of current mux)
22
Sundtek Streaming Server / Re:Sundtek Streaming Server (Englisch / English)
« am: April 09, 2017, 09:00:50 Nachmittag »
Hi!
Will there be eng setup? Auto scan is too long because it will scan many pay TV.
Please give us manual option to select few interesting mux.
Will there be eng setup? Auto scan is too long because it will scan many pay TV.
Please give us manual option to select few interesting mux.
23
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re:High CPU usage on network driver
« am: April 01, 2017, 11:41:09 Nachmittag »
I might add that there is also high CPU usage in DVBViewer Demo and DVB Dream on Win 7 
Always same thread:
Always same thread:
Code: [Auswählen]
SundtekSL.dll!DllGetClassObject
24
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re:Unknown modulation?
« am: Februar 19, 2017, 03:59:53 Nachmittag »Code: [Auswählen]
FEC: FEC_AUTO MOD: UNKNOWN VOLTAGE: V(13V) TONE: ONCan we have POL: V instead of voltage?It is also interesting to read research article about DVB-S2X:
Zitat von: Development of satellite high-definition television in Europe
In order to ensure transmission of the greatest possible number of HDTV and UHDTV channels via satellites, it is necessary to convert the satellite DVB-S transponders to DVB-S2 transponders. Conversion to the 16APSK modulation will result in the increased capacity for HDTV channels. Furthermore, in order to use satellite capacity as cost effectively as possible, the MPEG-4 compression standard should also be used for the transmission of SDTV channels.
25
{Single, Dual, Quad} Sundtek SkyTV Ultimate / High CPU usage on network driver
« am: Februar 11, 2017, 08:25:12 Nachmittag »
Hi,
I still try to find out why enabling network tuner in ProgDVB will cause high CPU usage. Easily can be seen that 2 threads are responsible for this:
Thanks.
I still try to find out why enabling network tuner in ProgDVB will cause high CPU usage. Easily can be seen that 2 threads are responsible for this:
Code: [Auswählen]
SundtekSL.dll!DllGetClassObject+0x4300
bda.Device!ProgModuleApi2_GetDeviceUnit2+0x11280Thanks.
26
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re:Unknown modulation?
« am: Februar 11, 2017, 08:13:29 Nachmittag »
Thanks. I will wait for next opportunity. In any case, tool will not recognize 16-APSK.
Manual tuning also can be expanded -M modulation (QPSK, 8PSK,...)
Manual tuning also can be expanded -M modulation (QPSK, 8PSK,...)
27
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Unknown modulation?
« am: Februar 09, 2017, 10:42:29 Nachmittag »
Hi,
I know this is unlikely, but some users may encounter undefined modulation in blindscan.
Read signal should display 8-PSK and 16-APSK(although real property names are PSK_8 and APSK_16).
Best part in all this is that somehow it is possible to receive such broadcasts in Tvheadend.
Thanks.
I know this is unlikely, but some users may encounter undefined modulation in blindscan.
Read signal should display 8-PSK and 16-APSK(although real property names are PSK_8 and APSK_16).
Best part in all this is that somehow it is possible to receive such broadcasts in Tvheadend.
Thanks.
28
Sundtek MediaTV Pro (Europe) / Sundtek Sky TV Pro Linux usage
« am: November 21, 2016, 07:58:13 Nachmittag »
Hi! Any improvements of output on blindscan and readsignal?
TAB can be used to avoid misaligned text with 4 digit SR?
TAB can be used to avoid misaligned text with 4 digit SR?
Code: [Auswählen]
Scanning HL
MODE FREQUENCY(MHz) SYMBOL_RATE MODULATION POL TONE
DVB-S 10962 4249 QPSK H OFF
DVB-S2 10980 27500 8PSK H OFFvs current:Code: [Auswählen]
Succeeded! This device supports Hardware Blindscan
Scanning 13V Lowband
MODE: DVB-S FREQUENCY(MHz): 10718 SYMBOL_RATE: 27500 MODULATION: QPSK VOLTAGE: 13V TONE: OFFReadsignal should use default 0 adapter/frontend when -d is not specified.
29
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re:Sundtek SkyTV Ultimate IV keine Stream mehr nach Treiberupdate
« am: Juni 05, 2016, 01:32:56 Nachmittag »mediaclient --readsignal=0 -d /dev/dvb/adapter0/frontend0 --band UNIVERSAL-S 23500000?Code: [Auswählen]SIGNAL: [.............................. ] ( 90%) SATQUALITY: 86% SNR: 15 BER: 0 FREQ: 11362000 Hz LOCKED: YES SYS: DVB-S2 SYM: 22000000 FEC: FEC_2_3 MOD: PSK_8 VOLTAGE: H(18V) TONE: OFF
SIGNAL(%) Q(%) SNR BER LOCKED FREQ(MHz) SYS SYM FEC MOD POL TONE
[.............................. ] 90 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
[............................. ] 89 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
[............................. ] 89 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
[............................. ] 89 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
[............................. ] 89 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
[............................. ] 89 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
[............................. ] 89 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
[............................. ] 89 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
[............................. ] 89 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
[............................. ] 89 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
[.............................. ] 90 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
[............................. ] 89 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
[............................. ] 89 86 15 0 YES 11362 DVB-S2 22000 FEC_2_3 PSK_8 H(18V) OFF
SIGNAL(%) Q(%) SNR BER LOCKED FREQ(MHz) SYS SYM FEC MOD POL TONE
mediaclient -m DVBS -f 964000 -M QPSK -S 22000000 -V H -E 5/6
http://wiki.sundtek.de/index.php/Mediaclient#Tuning_DVB-S2
30
VU+ - VU Duo Settopbox / Re:Blindscan on VU+ Solo2 with OpenPLI image
« am: April 10, 2016, 10:34:31 Nachmittag »SuperCleaner output?Code: [Auswählen]root@et8500:~# /opt/bin/mediaclient --blindscan /dev/dvb/adapter0/frontend4
Succeeded this device supports Hardware Blindscan
MODE: DVB-T FREQUENCY: 474000000 BANDWIDTH: 8000000
MODE: DVB-T FREQUENCY: 490000000 BANDWIDTH: 8000000
^C
root@et8500:~# /opt/bin/mediaclient --blindscan /dev/dvb/adapter0/frontend5
Succeeded this device supports Hardware Blindscan
Scanning 13V Lowband
MODE: DVB-S FREQUENCY(MHz): 10718 SYMBOL_RATE: 27500 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 10757 SYMBOL_RATE: 27499 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 10795 SYMBOL_RATE: 27500 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
^C
Code: [Auswählen]
root@et8500:~# mediaclient --blindscan /dev/dvb/adapter0/frontend4
Succeeded this device supports Hardware Blindscan
MODE FREQUENCY BANDWIDTH
DVB-T 474.000 8
DVB-T 490.000 8
^C
root@et8500:~# mediaclient --blindscan /dev/dvb/adapter0/frontend5
Succeeded this device supports Hardware Blindscan
Scanning 13V Lowband(TONE: OFF)
MODE FREQUENCY(MHz) SYMBOL_RATE POL MODULATION
DVB-S 10718 27500 V QPSK
DVB-S2 10757 27499 V 8PSK
DVB-S2 10795 27500 V 8PSK
^C
Can you confirm overlap of some results(like 11824 both in Lowband and highband)?Also add option for scanning only 1 band(--range VL)?