Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - MikeT23

Seiten: [1]
1
Thanks for the very quick reply. You're right, as usual. I used w_scan to tune and then mplayer and it worked so I'll have to try troubleshooting in MythTV.

2
{Single, Dual, Quad} Sundtek SkyTV Ultimate / SkyTV Ultimate III Permissions on Linux
« am: Oktober 20, 2020, 11:10:54 Nachmittag »
Hi,

I bought a SkyTV Ultimate III about 8 years ago but after I updated my OS a couple of years ago I was unable to use the device. Only now have I found the time to return to this problem.

My OS is openSUSE Leap 15.2 and I would like to use the device with MythTV. When I try to tune to the channels I get the failure "Error parsing parameters".

After digging around I find (ls /dev/dvb/adapter0 -la) that the permissions are owner: root, group:root. I was expecting it to be owner:root, group:video because in file 50-udev-default.rules I have the line SUBSYSTEM=="dvb", GROUP="video". If I log in as root, I can use the device.

Can anyone please advise me how to get it working again.

Thanks,
Mike

3
Solved.

In openSUSE, there is something called lvm2-activation-generator
which is invoked by 2 service files: lvm2-activation-early.service and
lvm2-activation.service.

I have no idea why installing the Sundtek driver causes a problem with these but as I don't use LVM, I've followed the advice to mask these two services and now my boot time is back to a few seconds.

The commands to disable them (as root):

systemctl mask lvm2-activation-early.service
systemctl mask lvm2-activation.service

4
I have recently updated to OpenSuse 13.2 (complete re-installation) on a 64 bit computer.
After I installed the Sundtek driver for my Sundtek USB DVB-S/S2, booting now takes
3 minutes. If I remove the driver, the boot process is again very fast. With
the same device on the same computer running OpenSuse 12.2, I had no problems, it
installed easily & had no problems.
Can anyone please help or advise what to do?

The boot.log contains:
g for udev Wait for Complete Device Initialization (55s / 2min 59s)
[  *** ] A start job is running for udev Wait for Complete Device Initialization (56s / 2min 59s)
[   ***] A start job is running for udev Wait for Complete Device Initialization (56s / 2min 59s)
[    **] A start job is running for udev Wait for Complete Device Initialization (57s / 2min 59s)
[     *] A start job is running for udev Wait for Complete Device Initialization (57s / 2min 59s)
.....
..... the same for 3 minutes ....
.....
[ ***  ] A start job is running for udev Wait for Complete Device Initialization (2min 58s / 2min 59s)
[***   ] A start job is running for udev Wait for Complete Device Initialization (2min 58s / 2min 59s)
[**    ] A start job is running for udev Wait for Complete Device Initialization (2min 59s / 2min 59s)
[*     ] A start job is running for udev Wait for Complete Device Initialization (2min 59s / 2min 59s)
[FAILED] Failed to start udev Wait for Complete Device Initialization.
See "systemctl status systemd-udev-settle.service" for details.
         Starting Activation of LVM2 logical volumes...
[  OK  ] Started Activation of LVM2 logical volumes.
[  OK  ] Reached target Encrypted Volumes.
         Starting Activation of LVM2 logical volumes...
[  OK  ] Started Activation of LVM2 logical volumes.
[  OK  ] Reached target Local File Systems.
         Starting Shadow /etc/init.d/boot.localfs...
[  OK  ] Started Shadow /etc/init.d/boot.localfs.
         Starting LSB: Set default boot entry if called...
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting Trigger Flushing of Journal to Persistent Storage...
         Starting Create Volatile Files and Directories...
[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
[  OK  ] Started Create Volatile Files and Directories.
         Starting LSB: AppArmor initialization...
         Starting Security Auditing Service...
[  OK  ] Started LSB: Set default boot entry if called.
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
[  OK  ] Started Security Auditing Service.
         Starting Update UTMP about System Reboot/Shutdown...
[  OK  ] Started Update UTMP about System Reboot/Shutdown.
[  OK  ] Started LSB: AppArmor initialization.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on Open-iSCSI iscsid Socket.
[  OK  ] Listening on PC/SC Smart Card Daemon Activation Socket.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Timers.
         Starting Restore Sound Card State...
[  OK  ] Reached target Basic System.
         Starting Machine Check Exception Logging Daemon...
[  OK  ] Started Machine Check Exception Logging Daemon.
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Permit User Sessions...
         Starting Name Service Cache Daemon...
         Starting WPA Supplicant daemon...
         Starting Modem Manager...
         Starting irqbalance daemon...
[  OK  ] Started irqbalance daemon.
         Starting Sundtek MediaTV...
         Starting /etc/init.d/boot.local Compatibility...
         Starting D-Bus System Message Bus...
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started WPA Supplicant daemon.
         Starting SuSEfirewall2 phase 1...
[  OK  ] Started Restore Sound Card State.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Name Service Cache Daemon.
[  OK  ] Started Sundtek MediaTV.
         Starting Authorization Manager...
[  OK  ] Reached target User and Group Name Lookups.
         Starting Login Service...
[  OK  ] Reached target Host and Network Name Lookups.
         Starting X Display Manager...
[  OK  ] Started Sundtek MediaTV.
[  OK  ] Started Login Service.
         Starting Locale Service...
[  OK  ] Started Sundtek MediaTV.
[  OK  ] Started Authorization Manager.
[  OK  ] Started Locale Service.
[  OK  ] Started Modem Manager.
[  OK  ] Started Sundtek MediaTV.
[  OK  ] Started Sundtek MediaTV.
[  OK  ] Started Sundtek MediaTV.
[  OK  ] Started Sundtek MediaTV.
[  OK  ] Started Sundtek MediaTV.
[  OK  ] Started X Display Manager.
[  OK  ] Created slice system-systemd\x2drfkill.slice.
         Starting Load/Save RF Kill Switch Status of rfkill0...
         Starting Bluetooth service...
[  OK  ] Started Load/Save RF Kill Switch Status of rfkill0.
[  OK  ] Started Bluetooth service.
[  OK  ] Reached target Bluetooth.
         Starting Hostname Service...

The Sundtek driver was installed with:

# cd /tmp
# wget http://www.sundtek.de/media/sundtek_netinst.sh
# chmod 777 sundtek_netinst.sh
# sudo ./sundtek_netinst.sh

with no errors:

Wollen Sie fortfahren [J/N]:
y
adding /opt/bin to environment paths
unpacking...
checking system... testing libc OK 2.19.0
64Bit System detected
installing (netinstall mode) ...
Downloading architecture specific driver ... 64bit
Download finished, installing now ...
installing remote control support
finalizing configuration... (can take a few seconds) 
installing libmediaclient interception library
Starting driver...
done.
linux-s7qt:/tmp #

The problem seems to be related to something called systemd-udev-settle.service

mike@linux-s7qt:~> systemctl status systemd-udev-settle.service
systemd-udev-settle.service - udev Wait for Complete Device Initialization
   Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service; static)
   Active: failed (Result: timeout) since Sat 2014-12-06 15:53:03 GMT; 26min ago
     Docs: man:udev(7)
           man:systemd-udevd.service(8)
  Process: 468 ExecStart=/usr/bin/udevadm settle (code=killed, signal=TERM)
 Main PID: 468 (code=killed, signal=TERM)

5
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re:Kaffeine - No device Found
« am: Dezember 07, 2012, 03:26:26 Nachmittag »
Success! I rebuilt Kaffeine with the patches.

I've now noticed that this topic is already in these forum pages as several threads (auf Deutsch). (Ich muss mein Deutsch verbessern).
I found the thread titled "HOWTO: Kaffeine patch .diff" useful.

In summary I downloaded the Kaffeine code with git, applied the sundtek_0.3.diff patch with the patch command and then rebuilt kaffeine as instructed by the README file.

Kaffeine now plays DVDs & TV perfectly - with VAAPI - I might add.

I've tried Ubuntu & Kubuntu and I prefer OpenSuse. It seems to me that it's better supported and has a more responsive forum.

Thanks for the advice & help.
M

6
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re:Kaffeine - No device Found
« am: Dezember 07, 2012, 01:05:01 Vormittag »
Yes, I've spent many hours trying to install missing plugins & codecs. As a newbie, I'm stumped. I've followed loads of advice on other forums and downloaded all sorts of packages (literally hundreds of items) and nothing has worked. I'm now very frustrated. I've now no idea what to install from where & how. Any help would be appreciated.

7
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Kaffeine - No device Found
« am: Dezember 06, 2012, 02:43:07 Nachmittag »
Hello,
I recently bought a Sundtek SkyTV USB DVB-S/S2 and found that in Kaffeine there was no device detected.
Markus (at Sundtek) kindly sent me this info:

opensuse requires some modified kaffeine Version, someone already updated suse packages:
The repositories are here:
http://download.opensuse.org/repositories/home:/Max1:/branches:/openSUSE:/12.1:/Update/standard/
http://download.opensuse.org/repositories/home:/Max1:/branches:/openSUSE:/12.1:/Update/openSUSE_12.2/
So I added these to my repositories and reinstalled Kaffeine.
The device is now recognised and I have tuned it but when I try to play TV I get the message:
Cannot find demux plugin for MRL "fifo:/home/mike/.kde4/share/apps/kaffeine/dvbpipe.m2t".Also I cannot play DVDs any more - I get the message:
This version of Xine lacks support for playing DVD discs for legal reasons.
Please go to http://www.opensuse.org/XINE#Legal_Matters for further details.
I have tried to follow the link but ultimately i get to the page below and I have no idea which downloads I need:
http://packman.links2linux.org/package/xine-lib/332744
Can anyone help - I need to know how to get Kaffeine to play TV and to do these seemingly "illegal" things like play a DVD?

Thanks, in advance.
M

Seiten: [1]