Sundtek Support Forum

root@et8000:~#  cat /proc/bus/nim_sockets
NIM Socket 0:
        Type: DVB-C
        Name: TDA10024
        Has_Outputs: yes
        Frontend_Device: 0
        I2C_Device: 3
NIM Socket 1:
        Type: DVB-C
        Name: Sundtek DVB-C (192.168.1.200) (USB)
        Has_Outputs: no
        Frontend_Device: 1
        I2C_Device: -1
NIM Socket 2:
        Type: DVB-C
        Name: Sundtek DVB-C (192.168.1.200) (USB)
        Has_Outputs: no
        Frontend_Device: 2
        I2C_Device: -1

Driver is set to autostart, this is my sundtek.conf :

# sundtek configuration file - /etc/sundtek.conf
# created / modified: Jul 08 2014, 19:25h by sundtekcontrolcenter 1.4.0-20140223-r2

loglevel = off
autoupdate = off
dmhwpidfilter = off
vtuner_acceleration = off
enablenetwork = off

###### configuration network
[NETWORK]
device=192.168.1.200:0

###### configuration stick 1
[U120105091633]
netrecoverymode=on
initial_dvb_mode=DVBC
dreambox_support_fe1=on

Thank you for the info, the channels are working

I have a problem watching scrambled HD channels , on the channels I see a lot of errors on the screen and the sound is corrupt ( tick/hiks).

Unscrambled HD cannels play fine, I’m testing on a arml based with debian wheezy system with driver version 2013-03-15. On this system I’am running tvheadend as stream-server and oscam to descramble the channel. I have test it on a different systems ( vlc / xbmc / windows )

If I connect the usb dvb-c sticjk to a windows machine and use dvbviewer everything work fine. ( using the same oscam server to descramble )

Kind regards,
Jeroen Teeuw

Hello,

I just installed my suntek on a Qnap TS-119II and the problem that i have is the tuner is not detecting any channels ( see log )

 
2012-10-31 20:18:55 [6036] Sundtek MediaTV Driver loaded. This driver is licensed for non-commercial use
2012-10-31 20:18:55 [6036] with Sundtek MediaTV only
2012-10-31 20:18:55 [6036] Driver loaded within 7107 milliseconds
2012-10-31 20:18:55 [6036] Serial(0): U111215143813
2012-10-31 20:18:55 [6036] Initial devicescan done, switching detection mode
2012-10-31 20:18:55 [6036] received device attach message
2012-10-31 20:18:55 [6037] notify request: media device connected
2012-10-31 20:18:58 [6036] Submitting 4 failed (112800)
2012-10-31 20:18:58 [6036] RV: -1
2012-10-31 20:18:58 [6036] ERROR: Cannot allocate memory
2012-10-31 20:18:58 [6036] Error enabling USB transfer
2012-10-31 20:18:58 [6036] Setting Frequency: 164000000
2012-10-31 20:18:58 [6036] Setting Symbolrate: 6900000
2012-10-31 20:18:58 [6036] Setting Modulation: 3
2012-10-31 20:18:59 [6036] Submitting 5 failed (112800)
2012-10-31 20:18:59 [6036] RV: -1
2012-10-31 20:18:59 [6036] ERROR: Cannot allocate memory
2012-10-31 20:18:59 [6036] Error enabling USB transfer
2012-10-31 20:18:59 [6036] Submitting 4 failed (112800)
2012-10-31 20:18:59 [6036] RV: -1
2012-10-31 20:18:59 [6036] ERROR: Cannot allocate memory
2012-10-31 20:18:59 [6036] Error enabling USB transfer
2012-10-31 20:18:59 [6036] Submitting 4 failed (112800)
2012-10-31 20:18:59 [6036] RV: -1
2012-10-31 20:18:59 [6036] ERROR: Cannot allocate memory
2012-10-31 20:18:59 [6036] Error enabling USB transfer
2012-10-31 20:18:59 [6036] Submitting 4 failed (112800)
2012-10-31 20:18:59 [6036] RV: -1
2012-10-31 20:18:59 [6036] ERROR: Cannot allocate memory
2012-10-31 20:18:59 [6036] Error enabling USB transfer
2012-10-31 20:19:00 [6036] Submitting 4 failed (112800)
2012-10-31 20:19:00 [6036] RV: -1
2012-10-31 20:19:00 [6036] ERROR: Cannot allocate memory
2012-10-31 20:19:00 [6036] Error enabling USB transfer
2012-10-31 20:19:00 [6036] Current mode: Media Digital TV
2012-10-31 20:19:00 [6036] Requested mode: Media Analog TV
2012-10-31 20:19:00 [6036] PID: 6174
2012-10-31 20:19:00 [6036] Application: ld-linux.so.3
2012-10-31 20:19:00 [6036] current mode != requested mode .. but there are still users there! 2
2012-10-31 20:19:01 [6036] Channel found (164000000)