Sundtek Support Forum

We only register our tuner in the system and use those interfaces which are available.
We have nothing to do with PiP.

This is not a problem with the internal DVB-T tuners.
I'll try to deal with this on an Enigma level.If possible.
When enigma if there is no error, then I'll get back to you.

Okay, another question.
TimeShift is not working tuners DVB-T/C or DVB-S2.
Like this?

Сhecked in ET85000/Formuler1/OS mini , tuners Sundtek DVB-T/C or DVB-S2
image openPLi

Example for test:
1)Activate PiP(live tv show service X/PiP window show service X)
2)Disable PiP --> PiP window close --> live tv stop video(pause) audio it runs at this moment.

The problem itself:
When close video decoder 1 --> video decoder 0(live tv) video not work

log:
<  1234.473> [eDVBCAService] new service 1:0:1:29E3:3CF0:13E:820000:0:0:0::Союз Int
<  1234.474> [eDVBCAService] add demux 0 to slot 0 service 1:0:1:29E3:3CF0:13E:820000:0:0:0::Союз Int
<  1234.474> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1234.475> [eDVBSectionReader] DMX_SET_FILTER pid=0
<  1234.475> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1234.476> [eDVBSectionReader] DMX_SET_FILTER pid=18
<  1234.480> RemovePopup, id = ZapError
<  1234.480> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1234.480> [eDVBSectionReader] DMX_SET_FILTER pid=0
<  1234.484> [eDVBFrontend] sleep 500ms
<  1234.847> [eDVBServicePMTHandler] PATready
<  1234.847> [eDVBServicePMTHandler] use pmtpid 00df for service_id 29e3
<  1234.847> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1234.848> [eDVBSectionReader] DMX_SET_FILTER pid=223
<  1234.848> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1234.848> [eDVBSectionReader] DMX_SET_FILTER pid=0
<  1234.850> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1234.850> [eDVBSectionReader] DMX_SET_FILTER pid=357
<  1234.851> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1234.851> [eDVBSectionReader] DMX_SET_FILTER pid=17
<  1235.034> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1235.034> [eDVBSectionReader] DMX_SET_FILTER pid=457
<  1235.036> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
<  1235.038> [eDVBServicePlay] have 1 video stream(s) (00f3), and 1 audio stream(s) (00fd), and the pcr pid is 00f3, and the text pid is ffffffff
<  1235.039> [eTSMPEGDecoder] decoder state: play, vpid=00f3, apid=00fd
<  1235.040> [eDVBVideo0] VIDEO_SLOWMOTION 0 ok
<  1235.040> [eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
<  1235.040> [eDVBVideo0] VIDEO_CONTINUE ok
<  1235.040> [eDVBAudio0] AUDIO_CONTINUE ok
<  1235.310> [eDVBCIInterfaces] gotPMT
<  1235.311> [eDVBCAService] don't build/send the same CA PMT twice
<  1235.311> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1235.311> [eDVBSectionReader] DMX_SET_FILTER pid=223
<  1235.317> [eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 544x576 aspect 2
<  1235.448> [eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 25000 fps
<  1235.448> [eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
<  1235.449> [eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 544x576 aspect 2
<  1235.577> [eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 25000 fps
<  1235.578> [eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
<  1235.579> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1235.580> [eDVBSectionReader] DMX_SET_FILTER pid=459
<  1235.582> [Dish] tuning failed
<  1235.727> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1235.727> [eDVBSectionReader] DMX_SET_FILTER pid=18
<  1235.854> [eDVBServicePMTHandler] sdt update done!
<  1241.584> action ->  ColorActions blue
<  1241.602> [SKIN] Parsing embedded skin <embedded-in-'PictureInPictureZapping'>
<  1241.634> [SKIN] Parsing embedded skin <embedded-in-'Dishpip'>
<  1241.690> playing pip service 1:0:1:29E3:3CF0:13E:820000:0:0:0::Союз Int
<  1241.691> [eDVBResourceManager] use cached_channel
<  1241.691> [eDVBServicePMTHandler] allocate Channel: res 0
<  1241.692> [eDVBCIInterfaces] addPMTHandler 1:0:1:29E3:3CF0:13E:820000:0:0:0::Союз Int
<  1241.692> [eDVBChannel] getDemux cap=01
<  1241.692> [eDVBServicePMTHandler] ok ... now we start!!
<  1241.692> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
<  1241.692> [eDVBServicePlay] have 1 video stream(s) (00f3), and 1 audio stream(s) (00fd), and the pcr pid is 00f3, and the text pid is ffffffff
<  1241.692> [eDVBChannel] getDemux cap=01
<  1241.693> [eTSMPEGDecoder] decoder state: play, vpid=00f3, apid=ffffffff
<  1241.693> [eDVBVideo] Video Device: /dev/dvb/adapter0/video1
<  1241.694> [eDVBVideo] demux device: /dev/dvb/adapter0/demux0
<  1241.694> [eDVBVideo1] VIDEO_SET_STREAMTYPE 0 - ok
<  1241.694> [eDVBVideo1] DMX_SET_PES_FILTER pid=0x00f3 ok
<  1241.694> [eDVBVideo1] DEMUX_START ok
<  1241.695> [eDVBVideo1] VIDEO_FREEZE ok
<  1241.695> [eDVBVideo1] VIDEO_PLAY ok
<  1241.700> [eDVBVideo1] VIDEO_SLOWMOTION 0 ok
<  1241.700> [eDVBVideo1] VIDEO_FAST_FORWARD 0 ok
<  1241.700> [eDVBVideo1] VIDEO_CONTINUE ok
<  1241.701> [eDVBCAService] add demux 0 to slot 1 service 1:0:1:29E3:3CF0:13E:820000:0:0:0::Союз Int
<  1241.701> [eDVBCAService] don't build/send the same CA PMT twice
<  1241.701> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1241.701> [eDVBSectionReader] DMX_SET_FILTER pid=0
<  1241.702> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1241.702> [eDVBSectionReader] DMX_SET_FILTER pid=18
<  1241.702> [eDVBChannel] getDemux cap=00
<  1241.993> [eDVBServicePMTHandler] PATready
<  1241.994> [eDVBServicePMTHandler] use pmtpid 00df for service_id 29e3
<  1241.994> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1241.994> [eDVBSectionReader] DMX_SET_FILTER pid=223
<  1241.995> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1241.995> [eDVBSectionReader] DMX_SET_FILTER pid=0
<  1241.996> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
<  1241.998> [eDVBServicePlay] have 1 video stream(s) (00f3), and 1 audio stream(s) (00fd), and the pcr pid is 00f3, and the text pid is ffffffff
<  1241.999> [eTSMPEGDecoder] decoder state: play, vpid=00f3, apid=ffffffff
<  1241.999> [eDVBVideo1] VIDEO_SLOWMOTION 0 ok
<  1241.999> [eDVBVideo1] VIDEO_FAST_FORWARD 0 ok
<  1241.999> [eDVBVideo1] VIDEO_CONTINUE ok
<  1242.001> [eDVBCIInterfaces] gotPMT
<  1242.001> [eDVBCAService] don't build/send the same CA PMT twice
<  1242.001> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1242.001> [eDVBSectionReader] DMX_SET_FILTER pid=223
<  1242.309> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
<  1242.309> [eDVBSectionReader] DMX_SET_FILTER pid=18
<  1242.467> [eDVBVideo1] VIDEO_GET_EVENT SIZE_CHANGED 544x576 aspect 2
<  1242.467> [eDVBVideo1] VIDEO_GET_EVENT FRAME_RATE_CHANGED 25000 fps
<  1242.467> [eDVBVideo1] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
<  1242.468> [eDVBVideo1] VIDEO_GET_EVENT SIZE_CHANGED 544x576 aspect 2
<  1242.468> [eDVBVideo1] VIDEO_GET_EVENT FRAME_RATE_CHANGED 25000 fps
<  1242.468> [eDVBVideo1] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
1088
<  1244.770> [eConsoleAppContainer] Starting /bin/sh
<  1244.777> [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 68(16)
<  1245.909> action ->  myShowHideActions hide
<  1247.145> action ->  MsgBoxActions ok
<  1247.168> [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
<  1247.169> [eDVBVideo1] DEMUX_STOP  ok
<  1247.210> [eDVBVideo1] VIDEO_STOP ok
<  1247.210> [eDVBVideo1] destroy
<  1247.210> [eDVBCAService] free slot 0 demux 0 for service 1:0:1:29E3:3CF0:13E:820000:0:0:0::Союз Int
<  1247.211> [eDVBCAService] don't build/send the same CA PMT twice
<  1249.649> [eDVBLocalTimerHandler] diff is 0
<  1249.650> [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
<  1249.650> [eDVBLocalTimerHandler] not changed
<  1249.652> [eDVBChannel] getDemux cap=00
<  1251.242> action ->  GlobalActions volumeUp


I see this problem for two years.

The problem is related to the channel scan.
blindscan_13E_14-04-2016_18-17-04.xml
Please see:
<?xml version="1.0" encoding="iso-8859-1"?>

<!--
File created on Четверг, 14 of апреля 2016, 18:17:04
using et8500 receiver running Enigma2 image, version 2016-03-17,
image Openpli 4, with the Blind scan plugin

Search parameters:
Тюнер F: Sundtek DVB-S/S2 (IV) (0/0) (USB) (DVB-S2)
Satellite: 13.0E Eutelsat Hot Bird 13B/13C/13D
Start frequency: 10700MHz
Stop frequency: 12750MHz
Polarization: vertical and horizontal
Lower symbol rate: 2000
Upper symbol rate: 45000
Only save unknown tranponders: yes
Filter out adjacent satellites: up to 3 degrees
-->

<satellites>
<sat name="13.0E Eutelsat Hot Bird 13B/13C/13D" flags="0" position="130">
<transponder frequency="10774000" symbol_rate="27500000" polarization="0" fec_inner="0" system="0" modulation="1"/>
</sat>
</satellites>After scan tuner (sundtek sky tv ultimate 5) --> 0 channels found
After scan any internal tuner  --> 2 channels found

Use manual scan, if set System_DVB_S2 --> scan tuner (sundtek sky tv ultimate 5) --> 2 channels found

It should not be.
This is a bug in the drivers.
It can be fixed?

The principle is (universal lnb):

OK frequency 27500 FEC_AUTO NOT_IMPLEMENTED INVERSION_OFF
13V Lowband
-----------
Frequency: frequency KHz+9750000
Polarisation: vertical

13V Highband
-----------
Frequency: frequency KHz+10600000
Polarisation: vertical

18V Lowband
-----------
Frequency: frequency KHz+9750000
Polarisation: horizontal

18V Highband
Frequency: frequency KHz+10600000
Polarisation: horizontal


That's right?

Universal LNB
Scanning 18V Lowband
OK 1024288 27500 FEC_AUTO NOT_IMPLEMENTED INVERSION_OFF
That's right?

FREQUENCY: 1024288+9750000
Polarisation: Horizontal

?

Please help, give me a command response DVB-C mode,I do not use DVB-C:
1)
/opt/bin/mediaclient --blindscan [nim_socket]

2)
/opt/bin/mediaclient --blindscan /dev/dvb/adapter0/frontend[nim_socket]
First, see [nim_socket]:
cat /proc/bus/nim_sockets


Super
root@et8500:~# /opt/bin/mediaclient  --blindscan /dev/dvb/adapter0/frontend4
Succeeded this device supports Hardware Blindscan
MODE: DVB-T FREQUENCY: 474000000 BANDWIDTH: 8000000
MODE: DVB-T FREQUENCY: 490000000 BANDWIDTH: 8000000
^C
root@et8500:~# /opt/bin/mediaclient  --blindscan /dev/dvb/adapter0/frontend5
Succeeded this device supports Hardware Blindscan
Scanning 13V Lowband
MODE: DVB-S  FREQUENCY(MHz): 10718 SYMBOL_RATE: 27500 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 10757 SYMBOL_RATE: 27499 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 10795 SYMBOL_RATE: 27500 MODULATION: PSK8 VOLTAGE: 13V TONE: OFF
^C


Sorry, this is С++.
I need Python code.
C-BAND? where does this matter?

OK 968531 27500 FEC_AUTO NOT_IMPLEMENTED INVERSION_OFF
MODE: DVB-S  FREQUENCY(MHz): 10718 SYMBOL_RATE: 27500 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
this is egual value.Only different formats.

is 968531 need 10718 why?