Sundtek Support Forum

openPli 8.0 or VTI image/
Vu+solo4k/duo4k.
Visible only one tuner(not dual tuners).
openpli develop vusolo4k

vusolo4k login: root
Last login: Tue Dec 15 21:16:41 EET 2020 on pts/0
root@vusolo4k:~# /usr/sundtek/sun_dvb.sh info
--------------------------------------
DVB Tuner info
--------------------------------------
**** List of Media Hardware Devices ****
device 0: [MediaTV Digital Home III (EU)]  DVB-C, DVB-T, DVB-T2
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 3-1.2
  [SERIAL]:
     ID: U150511201402
  [DVB-C,DVB-T,DVB-T2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0

device 1: [             Dual S2]  DVB-S/S2, REMOTE-CONTROL, DVB-S/S2
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 3-1.4
  [SERIAL]:
     ID: U201009191237
  [DVB-S/S2]:
     FESTATUS: ACTIVE
     LNBVOLTAGE: DISABLED
     LNBSUPPLY: USBPOWER
     LNBSTATUS: OK
     FRONTEND: /dev/dvb/adapter2/frontend0
     DVR: /dev/dvb/adapter2/dvr0
     DMX: /dev/dvb/adapter2/demux0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0
  [DVB-S/S2]:
     FESTATUS: STANDBY
     FRONTEND: /dev/dvb/adapter3/frontend0
     DVR: /dev/dvb/adapter3/dvr0
     DMX: /dev/dvb/adapter3/demux0

NIM Socket 0:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 0
NIM Socket 1:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 1
NIM Socket 2:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 2
NIM Socket 3:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 3
NIM Socket 4:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 4
NIM Socket 5:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 5
NIM Socket 6:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 6
NIM Socket 7:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 7
NIM Socket 8:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(AVL6222)
        Frontend_Device: 8
        I2C_Device: 4
NIM Socket 9:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(AVL6222)
        Frontend_Device: 9
        I2C_Device: 4

NIM Socket 10:
        Type: DVB-T
        Name: Sundtek DVB-T (III) (1/0) (USB):VTUNER
        Frontend_Device: 10
NIM Socket 11:
        Type: DVB-S2
        Name: Sundtek DVB-S/S2 (VIII) (2/0) (USB):VTUNER
        Frontend_Device: 11root@vusolo4k:~#


Hi Sundtek
Solo4k/openPli/MediaTV Digital Home III (EU):mode DVB-T
root@vusolo4k:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [MediaTV Digital Home III (EU)]  DVB-C, DVB-T, DVB-T2
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 3-1
  [SERIAL]:
     ID: U150511201402
  [DVB-C,DVB-T,DVB-T2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0
Old drivers scan took 193987 ms/ 3min
root@vusolo4k:~# /opt/bin/mediaclient --build
Build date: 2018-12-20 13:50:32
root@vusolo4k:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [MediaTV Digital Home III (EU)]  DVB-C, DVB-T, DVB-T2
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 3-1
  [SERIAL]:
     ID: U150511201402
  [DVB-C,DVB-T,DVB-T2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0

root@vusolo4k:~# /opt/bin/mediaclient --blindscan 10
waiting for 1 seconds
OK 474000 0 FEC_AUTO QPSK INVERSION_OFF
OK 490000 0 FEC_AUTO QPSK INVERSION_OFF
OK 514000 0 FEC_AUTO QPSK INVERSION_OFF
OK 570000 0 FEC_AUTO QPSK INVERSION_OFF
OK 586000 0 FEC_AUTO QPSK INVERSION_OFF
OK 618000 0 FEC_AUTO QPSK INVERSION_OFF
scan took 193987 ms (found 6 muxes)
root@vusolo4k:~# /opt/bin/mediaclient --blindscan /dev/dvb/adapter0/frontend10
Succeeded this device supports Hardware Blindscan
MODE: DVB-T FREQUENCY: 474000000 BANDWIDTH: 8000000
MODE: DVB-T FREQUENCY: 490000000 BANDWIDTH: 8000000
MODE: DVB-T FREQUENCY: 514000000 BANDWIDTH: 8000000
MODE: DVB-T FREQUENCY: 570000000 BANDWIDTH: 8000000
MODE: DVB-T FREQUENCY: 586000000 BANDWIDTH: 8000000
MODE: DVB-T FREQUENCY: 618000000 BANDWIDTH: 8000000
Last drivers scan took 1046198 ms / 18min

1) Can you reduce scan times in drivers(old 3 min/last 18min)?
Or is it not possible?
Or is it just a problem with my old hardware(MediaTV Digital Home III)?

2)If you use the format /opt/bin/mediaclient --blindscan 10 , new found transponders are visible on the screen.
Example:
show data output
waiting for 1 secondspause N sec
OK 474000 0 FEC_AUTO QPSK INVERSION_OFFpause N sec
OK 490000 0 FEC_AUTO QPSK INVERSION_OFF
If you use the format /opt/bin/mediaclient --blindscan /dev/dvb/adapter0/frontend10 , new found transponders are not visible on the screen.
show only first data output
Succeeded this device supports Hardware Blindscannext  data output not visible all data comes at the end and immediately starts scanning channels
In telnet everything is as it should be, line by line, but in enigma there is a problem, there is only one line at the end of the scan.
It seems that some special character is missing at the end of each line that is in the line 'Succeeded this device supports Hardware Blindscan'.
It's easy to check:
https://github.com/OpenPLi/enigma2/blob/a009c97448fc4bf3450df5d68afd045b65ad210d/lib/python/Screens/ScanSetup.py#L563
replace
if self.terrestrial_tunerName.startswith("Sundtek"):
- cmd = "/opt/bin/mediaclient --blindscan /dev/dvb/adapter0/frontend%d" % nim_idx
+ cmd = "/opt/bin/mediaclient --blindscan %d" % nim_idx
print "SCAN CMD : ",cmd
self.terrestrial_search_container.execute(cmd)Use Sundtek DVB-T/T2

Menu/Setup/Service searching/Manual scan/select Sundtek tuner DVB-T/T2:
   Type of scan --> Complete
   Scan options --> All frequency

@Sundtek
Transcoding is possible on your tuners?

Sundtek
About this question...
http://support.sundtek.com/index.php/topic,1833.msg17003.html#msg17003

You can make changes to the drivers.
Return the DTV_STAT_SIGNAL_STRENGTH / DTV_STAT_CNR value as zero.
Or at least add a key to start the driver DTV_STAT_SIGNAL_STRENGTH/ DTV_STAT_CNR S with zero.

Please help .

problem here     def updateDeviceList
mc_lines=device.split("\n")if (len(net_result)>0) and len(device_choices)>i: need devices
net_result ?there is no such variable

use this one for ARM

Thanks,work fine...
root@vusolo4k:~# mediaclient --blindscan 11
waiting for 1 seconds
Scanning 13V Lowband
OK DVB-S 968361 27500 QPSK V OFF
OK DVB-S2 1006490 27499 8PSK V OFF
OK DVB-S2 1045633 27500 8PSK V OFF
OK DVB-S2 1083311 27501 8PSK V OFF
OK DVB-S 1122257 27500 QPSK V OFF
OK DVB-S2 1160689 27501 8PSK V OFF
....


What does ls /dev/dvb/frontend* show up?

mediaclient old
yes, /dev/dvb/adapter0/frontend11 work
root@vusolo4k:~# /opt/bin/mediaclient --blindscan 11
root@vusolo4k:~# /opt/bin/mediaclient --blindscan /dev/dvb/adapter0/frontend11
Succeeded this device supports Hardware Blindscan
Scanning 13V Lowband
MODE: DVB-S  FREQUENCY(MHz): 10718 SYMBOL_RATE: 27500 MODULATION: QPSK VOLTAGE: 13V TONE: OFF
MODE: DVB-S2 FREQUENCY(MHz): 10757 SYMBOL_RATE: 27499 MODULATION: PSK8 VOLTAGE:
I had just made:
https://github.com/OpenPLi/enigma2-plugins/blob/master/blindscan/src/plugin.py#L788

test
root@vusolo4k:~# //opt/bin/mediaclient
//opt/bin/mediaclient: line 1: syntax error: unexpected "("
root@vusolo4k:~# uname -a
Linux vusolo4k 3.14.28-1.8 #1 SMP Fri Sep 9 01:28:49 EEST 2016 armv7l GNU/Linux


Just for your information.
New drivers 2016-10-20
vusolo4k login: root
root@vusolo4k:~# cat /proc/bus/nim_sockets
NIM Socket 0:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 0
NIM Socket 1:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 1
NIM Socket 2:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 2
NIM Socket 3:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 3
NIM Socket 4:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 4
NIM Socket 5:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 5
NIM Socket 6:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 6
NIM Socket 7:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(7376 FBC)
        Frontend_Device: 7
NIM Socket 8:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(AVL6222)
        Frontend_Device: 8
        I2C_Device: 4
NIM Socket 9:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(AVL6222)
        Frontend_Device: 9
        I2C_Device: 4

NIM Socket 10:
        Type: DVB-T
        Name: Sundtek DVB-T (III) (1/0) (USB)
        Frontend_Device: 10
NIM Socket 11:
        Type: DVB-S2
        Name: Sundtek DVB-S/S2 (IV) (0/0) (USBDVB-S2
        Frontend_Device: 11root@vusolo4k:~#

info NIM Socket 11