Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - Sundtek

Seiten: 1 ... 533 534 [535] 536 537 ... 568
8011
Treiber / Re:Update 11. Februar 2010
« am: März 01, 2010, 09:28:40 Vormittag »
Wir koennen das bestaetigen, es gibt einen Kernelbug zwischen 2.6.32.9 und 2.6.33. Der wird erst mit dem naechsten Kernelupdate ausgebessert. Wir koennen hierbei leider auch nicht mehr machen.
Ein SUSE Mitarbeiter wollte die USB Performance verbessern, hat dabei jedoch den Transfer beschaedigt.

8012
Sundtek MediaTV Pro / Neues im Maerz
« am: März 01, 2010, 08:22:16 Vormittag »
Da die Softwareangebote in naechster Zeit wachsen werden ist der Treiberabschnitt nur noch mit einem bestaetigten Account zugaenglich.

8013
Sundtek MediaTV Pro / Re:Installation unter OpenSuse 11.1/11.2 32 bit
« am: Februar 27, 2010, 11:32:58 Nachmittag »
Sofern Sie einen Remotezugang zu Ihrem System freischalten koennen, koennten wir uns Ihr Problem direkt ansehen. Dies wuerde das Problem wohl am schnellsten loesen da wir es lokal auch nicht nachvollziehen koennen.

8014
Sundtek MediaTV Pro / Re:Installation unter OpenSuse 11.1/11.2 32 bit
« am: Februar 27, 2010, 10:49:13 Nachmittag »
Koennen Sie uns noch Details geben welches ISO Sie installiert haben (damit wir ein gleiches Setup durchfuehren koennen)?

8015
Sundtek MediaTV Pro / Re:Installation unter OpenSuse 11.1/11.2 32 bit
« am: Februar 27, 2010, 08:22:45 Nachmittag »
Der Treiber sollte sich grundsaetzlich installieren lassen mit Suse 32bit.

Wir haben dies soeben mit OpenSuse 11.2/2.6.31.5 Gnome LiveCD getestet und es hat soweit alles funktioniert.

Koennen Sie die SHA1 Summe Ihres heruntergeladenen Paketes ueberpruefen:

Zitat
linux:/home/linux # wget http://www.sundtek.de/support/empia_installer_100222.sh
--2010-02-27 19:45:12--  http://www.sundtek.de/support/empia_installer_100222.sh
Resolving www.sundtek.de... 85.10.198.106
Connecting to www.sundtek.de|85.10.198.106|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4412217 (4.2M) [text/x-sh]
Saving to: `empia_installer_100222.sh'

100%[===================================================>] 4,412,217    894K/s   in 4.9s    

2010-02-27 19:45:17 (878 KB/s) - `empia_installer_100222.sh' saved [4412217/4412217]
linux:/home/linux # chmod 777 empia_installer_100222.sh
linux:/home/linux # sha1sum empia_installer_100222.sh
ff20a40e2d507d73d866b950ea490f01b8c29b28  empia_installer_100222.sh
linux:/home/linux # id
uid=0(root) gid=0(root) groups=0(root)
linux:/home/linux # cat /proc/version
Linux version 2.6.31.5-0.1-default (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4
-branch revision 150839] (SUSE Linux) ) #1 SMP 2009-10-26 15:49:03 +0100
linux:/home/linux # ./empia_installer_100222.sh

Welcome to the EETI em28xx linux driver setup

Legal notice:
This software comes without any warranty, use it at your own risk

Do you want to continue [Y/N]:
Nutzungsbedingungen:
Sundtek uebernimmt keinerlei Haftung fuer Schaeden welche eventuell durch
das System oder die angebotenen Dateien entstehen koennen.

Wollen Sie fortfahren [J/N]:
y
adding /opt/bin to environment paths
stopping old driver instance...
installing em28xx driver to /opt
unpacking...
checking system... testing libc OK 2.10.1
32Bit System detected
installing...
finalizing configuration... (can take a few seconds)
installing libmediaclient interception library
Starting driver...
done.

8016
Drivers / Re:Update 11. February 2010
« am: Februar 27, 2010, 08:15:40 Nachmittag »
We will check it again with a weaker signal, and try to speed it up if possible.

8017
Drivers / Re:Update 11. February 2010
« am: Februar 27, 2010, 07:52:43 Nachmittag »
It's not normal, we'll check it within the next days.
We are preparing a few more updates since pulseaudio (again) seems to cause trouble on some systems...

8018
Software / Sundtek Remote Control Manager
« am: Februar 27, 2010, 04:03:41 Nachmittag »
Sundtek Remote Control Manager



The Sundtek Remote Control Manager is now available within the latest driver package.
It can be started by running /opt/bin/sundtekremote, the configuration can be done in the GUI.

Macros
In order to use the correct devicenode with autorun applications there are currently 4 macros available which will fill out the corresponding newly created devicenode

Zitat
FRONTENDDEVICE  ... /dev/dvb/adapter[n]/frontend0
VIDEODEVICE  ... /dev/video[n]
RADIODEVICE ... /dev/radio[n]
OSSDEVICE ... /dev/dsp[n]

to autostart tvtime when the stick gets plugged in simply use following command
/usr/bin/tvtime -d VIDEODEVICE

After pressing return in that field the setting will be stored in a configuration file.

Please note this application is currently bound to Gtk, we are about to move it to Qt which has a better portability.

8019
Treiber / Re:Update 11. Februar 2010
« am: Februar 27, 2010, 12:20:43 Nachmittag »
Verwenden Sie zufaellig einen aelteren Browser?

aoss wird mit dem neueren firefox/iceweasel nicht mehr funktionieren (dies ist unabhaengig von unserem Treiber).

Wir werden unser Interface mit dem naechsten Update welches den Remote Control Manager hinzufuegt aktualisieren damit es soweit keine Probleme mit aoss gibt.

8020
Software / Sundtek Remote Control Manager
« am: Februar 27, 2010, 04:27:27 Vormittag »
Sundtek Remote Control Manager



Installation und Konfiguration

Einfach sundtekremote in /opt/bin ausfuehren.

Macros
Um dem jeweiligen Programm das jeweils neue Interface mitzuteilen gibt es 4 Macros welche automatisch aufgeloest werden:

Zitat
FRONTENDDEVICE  ... /dev/dvb/adapter[n]/frontend0
VIDEODEVICE  ... /dev/video[n]
RADIODEVICE ... /dev/radio[n]
OSSDEVICE ... /dev/dsp[n]

tvtime kann wie folgt gestartet werden:
/usr/bin/tvtime -d VIDEODEVICE

Nach der Eingabe und Bestaetigung mittels Return wird dies sofort uebernommen.

8021
Treiber / Re:Update 11. Februar 2010
« am: Februar 26, 2010, 09:37:40 Nachmittag »
Verwendet das System den opensource nvidia Treiber oder den closed source Treiber?

2 Prozesse sind normal, der 2. Prozess ist fuer Audio zustaendig. Dies wurde eingefuehrt da viele Pulseaudio Versionen sehr fehlerhaft sind, bei einem Absturtz wird lediglich der 2. Prozess beeinflusst und der Hauptprozess kann wieder versuchen die Audioausgabe neu zu starten.

Das System sollte definitiv schnell genug sein, da es bereits auf einem NVidia ION (mit Closed Source Treibern) einwandfrei funktioniert.

Es gab anscheinend zwei kleine Updates bei USBFS mit 2.6.32.9 wir werden diese umgehend auf ihre Funktionalitaet testen...
* http://lkml.org/lkml/2010/2/19/192 ( dieses Linux Kernelupdate hat das Problem verursacht )
* http://lkml.indiana.edu/hypermail/linux/kernel/1002.2/01532.html

Es handelt sich hierbei um einen Kernelbug, dies wurde soweit weitergeleitet und der Patch wird wohl in kuerze von den Kernelentwicklern rueckgaengig gemacht werden.

8022
Treiber / Re:Update 11. Februar 2010
« am: Februar 26, 2010, 12:49:00 Vormittag »
Dies sieht nach einem physikalischen Problem aus, ueberpruefen Sie bitte Ihre USB Verbindung zwischen PC und USB Stick. Wenn moeglich testen Sie auch andere USB Ports von Ihrem System.
Es sieht aus als ob die Videodaten bei der Uebertragung vom TV Geraet an den PC gestoert wurden.

Wenn Sie weitere USB Geraete an Ihrem USB Bus angeschlossen haben versuchen Sie diese zu entfernen. Analog USB TV Tuner benoetigen etwas mehr als 170 Mbit.

Bezueglich 'Ruckler' sollten Sie ueberpruefen ob es im Hintergrund eine Applikation gibt welche den CPU vollstaendig auslastet und diese gegebenenfalls stoppen oder pausieren. Was fuer ein System verwenden Sie hierbei (Graphikkarte/CPU?)

8023
Wir werden dies morgen bearbeiten. Leider haben unsere Entwickler derzeit allerhand zu tun, wir unterstuetzen soweit ebenfalls Anfragen von einigen Distributionen.

8024
Sundtek MediaTV HD ISDB-T is the world's first USB ISDB-T (BCAS/Japan is available uppon request)
, AnalogTV, Composite, S-Video, FM-Radio device which is fully supported with Linux, our technology provides support for the entire 2.6.x Linux Kernel Series, unpatched Kernels are supported from 2.6.15 on. An installation usually takes a few seconds only.

http://www.sundtek.com/docs/sundtek_smart_facts.pdf

The driver installation is currently mainly done on the console, we are working on providing a graphical installer lateron. The driver is developed by Sundtek Ltd. and runs as normal application (in userspace), if unexpected problems occur the system will not be affected by it, aside of that it has the advantage that it is not bound to any particular kernel version which makes difficult compiling unnecessary.

Minimum System requirements Linux 2.6.15/libc2.4+ 32 or 64 bit (which is basically supported by all distributions which have been available for the last 4 years/since 2006), 1.5 Ghz


Supported Architectures:



* Intel/AMD x86 (32/64 bit)
* ARM
* IBM PowerPC (eg. Sony Playstation 3 - first revision)
* MIPS
* further builds are available uppon request

This installer supports following operating systems:


* Linux
* FreeBSD 8.0 (will be released soon)
* Apple (Sundtek MediaTV Gold/will be released soon, mediaclient commands will work, although the Apple support comes with an extra Mac based installer and extra TV application)

Please note that the linux 2.6.27 and 2.6.28 series have a bug in the USB System wich makes the memory usage of the Linux system grow, this causes the system to run out of memory after some time. You can read more about this issue and how to fix it on the Linux USB Mailinglist, it is probably easier to use Linux 2.6.15 - 2.6.26 or 2.6.29+.

The latest driver version can be downloaded from the Driver Board

open a console and run following line as root
Zitat
$ wget http://www.sundtek.de/support/sundtek_netinst.sh # this always points to the latest available driver
$ chmod 777 sundtek_netinst.sh
$ sudo ./sundtek_netinst.sh

Welcome to the Sundtek linux driver setup

Legal notice:
This software comes without any warranty, use it at your own risk
Nutzungsbedingungen:
Sundtek übernimmt keinerlei Haftung für Schäden welche eventuell durch
das System oder die angebotenen Dateien entstehen können.

Do you want to continue [Y/N]:
Wollen Sie fortfahren [J/N]:
y
stopping old driver instance...
installing driver to /opt
unpacking...
checking system... 64Bit System detected
installing...
finalizing configuration... (can take a few seconds)  
installing libmediaclient interception library
Starting driver...
done.

for identifying the device in the system you can run following command:

Zitat
$ /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [      Sundtek ISDB-T]  ISDB-T, ANALOG-TV, FM-RADIO, REMOTE-CONTROL, OSS-AUDIO
  [ISDB-T]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [ANALOG-TV]:
     VIDEO0: /dev/video1
     VBI0: /dev/vbi0
  [FM-RADIO]:
     RADIO0: /dev/radio0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0
  [OSS]:
     OSS0: /dev/dsp0

Deinterlacing
Deinterlacing is also supported:

Original (scrolling text):

Sundtek Enhanced Quality:


Activate deinterlacer:
$ /opt/bin/mediaclient -d /dev/video1 --vfilter=on
Deinterlacer deaktivieren:
$ /opt/bin/mediaclient -d /dev/video1 --vfilter=off

Analogue TV/Composite/S-Video

for starting analogTV with tvtime:
tvtime -d /dev/video1

by default most linux tv players do not support digital audio properly, in order to fix that problem our driver supports internal audio processing, which means that the driver automatically tries to play the available data to the default soundcard, while the TV application is just in charge of displaying the video.



For using the device with mplayer:
$ mplayer tv:// -tv driver=v4l2:device=/dev/video1
MPlayer SVN-r29305-4.3.2 (C) 2000-2009 MPlayer Team

Playing tv://.
TV file format detected.
Selected driver: v4l2
 name: Video 4 Linux 2 input
 author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
 comment: first try, more to come ;-)
Selected device: Sundtek MediaTV
 Tuner cap: STEREO
 Tuner rxs:
 Capabilites:  video capture  VBI capture device  tuner  audio  read/write  streaming
 supported norms: 0 = PAL-BG; 1 = PAL-DK; 2 = PAL-I; 3 = PAL-M; 4 = NTSC-M;
 inputs: 0 = Television; 1 = Composite; 2 = S-Video;
 Current input: 0
 Current format: YUYV

The driver automatically tries to figure out the correct audio playback.



For using analogue TV with vlc, just start up VLC and select the corresponding capturedevice eg. /dev/video1 in our case



FM Radio

/opt/bin/mediaclient -f 90100000 -m RADIO -d /dev/radio0 -t 0

/opt/bin/mediaclient -m RADIO -d /dev/radio0 -c internal

/opt/bin/mediaclient -m RADIO -d /dev/radio0 --mute off

for disabling audio in the background:
/opt/bin/mediaclient -m RADIO -d /dev/radio0 --mute on

ISDB-T

Please note the device very much does all the carrier detection, because of that only the Frequency is needed in order to tune in an ISDB-T transponder
 
mplayer
$ /opt/bin/mediaclient -m ISDBT -f 113000000
Using device: /dev/dvb/adapter0/frontend0
Checking for lock:
. [LOCKED]

$ mplayer /dev/dvb/adapter0/dvr0
oder
$ cat /dev/dvb/adapter0/dvr0 | mplayer -cache 10240 -

[/img]

to remove the driver from the system:
./sundtek_netinst.sh -u

Sundtek linux driver setup

stopping driver...
removing driver
.......
driver successfully removed from system

Powersaving
The powersaving will be activated after 15 seconds of inactivity, after this time the device will start to cool down. Powersaving also increases the lifetime of the USB TV device.

Troubleshooting

it's possible that some applications already access the device driver during the bootup. This will cause the device to be set to the corresponding device mode.
To check which applications are accessing the driver you can run following command:

Zitat
$ /opt/bin/mediaclient --lc
**** List of Media Clients ****
/dev/dvb/adapter0/frontend0:
  No client connected
/dev/dvb/adapter0/dvr0:
  No client connected
/dev/dvb/adapter0/demux0:
  No client connected
/dev/video1:
  329 ... tvtime
/dev/vbi0:
  No client connected
/dev/radio0:
  No client connected
/dev/mediainput0:
  No client connected
/dev/dsp0:
  28289 ... mediasrv

please note tvtime does not support audio playback by itself, the multimedia framework itself is taking care about it, this also shows up the audio process being connected to the driver.

In order to disconnect (not to kill) tvtime from the driver following command can be used:

Zitat
$ /opt/bin/mediaclient --dc 329

Pulseaudio

There are some useful pulseaudio tools available (for example pavucontrol). Pavucontrol allows to individually configure the audio volume. Since pulseaudio is not stable yet it might happen that the driver switches back to Alsa during the runtime.

pavucontrol:


pavumeter:


NVidia graphicdrivers:
http://www.nvidia.de/Download/index.aspx?lang=de

ATI  graphicdrivers:
http://support.amd.com/de/gpudownload/Pages/index.aspx

Restricted Formats/Codecs Suse:
http://opensuse-community.org/Restricted_Formats/11.0
http://opensuse-community.org/Restricted_Formats/11.1

8025
Treiber / Re:Update 11. Februar 2010
« am: Februar 24, 2010, 02:51:15 Vormittag »
Dies hat durchaus Struktur, es wurde von Anfang an angekuendigt das 2 weitere Hotfixes eingespielt werden in diese Release (SECAM-L sowie eine Verbesserung bei VDR/wobei hierbei unter anderem auch Support fuer mehrfache Geraete gemeint wurde). Zudem sogar das Datum fuer diese Aenderungen angegeben wurde.

Der Fehler ist auch mit der alten Version bei uns mit Ubuntu 9.10 AMD64 nicht reproduzierbar.

Sollte dieses Problem erneut bei Ihnen auftreten bitten wir Sie unseren Support direkt ueber Skype zu kontaktieren um diesem Problem ggf. genauer auf den Grund zu gehen. Da wir mittlerweile so einige Geraete im Umlauf haben waere dies sicherlich bereits anderen Kunden auch aufgefallen und ein Sammelthread haette sich diesbezueglich im Forum entwickelt.

Seiten: 1 ... 533 534 [535] 536 537 ... 568