Sundtek Support Forum

Habe den Stick problemlos zum Laufen gebracht und nutze Me-Tv als Frontend.
Wenn ich den Rechner neu starte und Me-Tv öffne bekomme ich die Meldung "keine Frontend vorhanden."
Über die Konsole gebe ich dann:
/opt/bin/mediaclient -D DVBT
Using device: /dev/dvb/adapter0/frontend0
Setting Frontend Properties to: DVBT
Done.ein.
Zum Verständnis: Muss das jedesmal vorm Starten von MeTv ausführen?

Hier noch ein paar Daten zum Rechner etc.:
inxi -Fz
System:    Host: pegasus Kernel: 4.4.0-53-generic x86_64 (64 bit) Desktop: KDE Plasma 5.6.5
           Distro: Linux Mint 18 Sarah
Machine:   System: ASUS product: All Series
           Mobo: ASUSTeK model: H97-PRO GAMER v: Rev X.0x
           Bios: American Megatrends v: 2502 date: 12/08/2015
CPU:       Quad core Intel Xeon E3-1231 v3 (-HT-MCP-) cache: 8192 KB
           clock speeds: max: 3800 MHz 1: 2000 MHz 2: 2716 MHz 3: 2499 MHz 4: 3324 MHz 5: 3401 MHz
           6: 3400 MHz 7: 2653 MHz 8: 3402 MHz
Graphics:  Card: NVIDIA GM204 [GeForce GTX 970]
           Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: fbdev,vesa,nouveau)
           Resolution: 1920x1080@60.00hz
           GLX Renderer: GeForce GTX 970/PCIe/SSE2 GLX Version: 4.5.0 NVIDIA 370.28
Audio:     Card-1 NVIDIA GM204 High Definition Audio Controller driver: snd_hda_intel
           Card-2 Intel 9 Series Family HD Audio Controller driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.4.0-53-generic
Network:   Card: Intel Ethernet Connection (2) I218-V driver: e1000e
           IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 888.2GB (30.1% used) ID-1: /dev/sda model: Samsung_SSD_850 size: 512.1GB
           ID-2: /dev/sdb model: Samsung_SSD_840 size: 120.0GB
           ID-3: /dev/sdc model: Samsung_SSD_850 size: 256.1GB
Partition: ID-1: / size: 14G used: 11G (78%) fs: ext4 dev: /dev/sda1
           ID-2: /home size: 455G used: 150G (35%) fs: ext4 dev: /dev/sda2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 44C
           Fan Speeds (in rpm): cpu: 0
Info:      Processes: 248 Uptime: 17 min Memory: 975.1/7926.0MB Client: Shell (bash) inxi: 2.2.35
und

/opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [MediaTV Pro III USB (EU)]  DVB-C, DVB-T, DVB-T2, ANALOG-TV, FM-RADIO, REMOTE-CONTROL, OSS-AUDIO, RDS
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 3-10
  [SERIAL]:
     ID: U16122816....
  [DVB-C]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [DVB-T]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [DVB-T2]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [ANALOG-TV]:
     VIDEO0: /dev/video0
     VBI0: /dev/vbi0
  [FM-RADIO]:
     RADIO0: /dev/radio0
     RDS: /dev/rds0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0
  [OSS]:
     OSS0: /dev/dsp0

Sollte ich das falsche Sub-Forum erwischt haben, dann bitte verschieben, danke!!  

Gruß
CX5-Fahrer