Sundtek Support Forum

Liebes Supportteam,

ich brauche bei der Inbetriebnahme meines USB Sticks etwas Hilfe.

Linuxtreiber ist installiert und scheint zu funktionieren

john@Ani ~ $ /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [MediaTV Pro III USB (EU)]  DVB-C, DVB-T, DVB-T2, ANALOG-TV, FM-RADIO, REMOTE-CONTROL, OSS-AUDIO, RDS
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 2-1.2
  [SERIAL]:
     ID: U140108172814
  [DVB-C]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [DVB-T]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [DVB-T2]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [ANALOG-TV]:
     VIDEO0: /dev/video1
     VBI0: /dev/vbi0
  [FM-RADIO]:
     RADIO0: /dev/radio0
     RDS: /dev/rds0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0
  [OSS]:
     OSS0: /dev/dsp0

Ich tune z.B. auf die Frequenz von WDR Aachen, dass ich in Aachen auf 602MHz empfangen können müsste
Ausschnitt aus /usr/share/dvb/dvb-t/de-Nordrhein-Westfalen:
T 602000000 8MHz 1/2 NONE QAM64 8k 1/4 NONE # CH37: WDR-Aachen, NDR/WDR-Köln, MDR, SWR

john@Ani ~ $ /opt/bin/mediaclient -m DVBT -f 602000000 -b 8
Using device: /dev/dvb/adapter0/frontend0
Checking for lock:
.. [LOCKED]

Die blaue LED geht für ca 10-12 sek an

Ich kriege aber nichts rein

john@Ani ~ $ /opt/bin/mediaclient --readsignal=0 -d /dev/dvb/adapter0/frontend0
== reading digital TV signal ==
SIGNAL: [                                  ] (  0%)  BER:      0 FREQ: 602000000  Hz LOCKED:  NO BW: 8 Mhz
SIGNAL: [                                  ] (  0%)  BER:      0 FREQ: 602000000  Hz LOCKED:  NO BW: 8 Mhz
SIGNAL: [                                  ] (  0%)  BER:      0 FREQ: 602000000  Hz LOCKED:  NO BW: 8 Mhz
SIGNAL: [                                  ] (  0%)  BER:      0 FREQ: 602000000  Hz LOCKED:  NO BW: 8 Mhz[snip]

Die Probleme tauchen auch schon beim scannen auf:

john@Ani ~ $ scan-dvb /usr/share/dvb/dvb-t/de-Nordrhein-Westfalen
scanning /usr/share/dvb/dvb-t/de-Nordrhein-Westfalen
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 474000000 0 2 9 1 1 3 0
initial transponder 482000000 0 2 9 1 1 2 0
initial transponder 506000000 0 2 9 1 1 2 0
initial transponder 514000000 0 2 9 1 1 3 0
ERROR: cannot parse'                                            # CH26: ZDF, 3sat, KiKa / ZDFneo, ZDFinfokanal
'
initial transponder 522000000 0 1 9 3 1 3 0
initial transponder 538000000 0 2 9 1 1 3 0
initial transponder 546000000 0 2 9 1 1 3 0
initial transponder 554000000 0 1 9 3 1 3 0
initial transponder 570000000 0 2 9 1 1 3 0
initial transponder 586000000 0 2 9 1 1 3 0
initial transponder 594000000 0 2 9 1 1 3 0
initial transponder 602000000 0 1 9 3 1 3 0
initial transponder 666000000 0 1 9 3 1 3 0
initial transponder 674000000 0 2 9 1 1 3 0
initial transponder 690000000 0 2 9 1 1 3 0
initial transponder 698000000 0 1 9 3 1 3 0
initial transponder 706000000 0 2 9 1 1 3 0
initial transponder 722000000 0 2 9 1 1 3 0
initial transponder 730000000 0 2 9 1 1 3 0
initial transponder 746000000 0 2 9 1 1 3 0
initial transponder 762000000 0 2 9 1 1 2 0
initial transponder 778000000 0 2 9 1 1 3 0
initial transponder 786000000 0 2 9 1 1 3 0
>>> tune to: 474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
[snip]

Für hilfreiche Tipps wäre ich sehr dankbar.

John