Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - tednk

Seiten: [1]
1
VU+ - VU Duo Settopbox / Re:Media TV Digital Home III and T2
« am: Mai 21, 2015, 10:01:11 Nachmittag »
The problem with dvb-t2 and Sundtek MediaTV Digital Home III is related to the driver.

I had no luck with dvb-t2 at my friends house either, so then I tested the oldest driver from your download page. And with that driver both dvb-t and dvb-t2 worked as it should.


Then I tested a selection of linux drivers to figure out which work with dvb-t2 and which drivers don't work with dvb-t2.

All linux drivers, of those I tested, including sundtek_installer_150224.045219 and older work with dvb-t2.

All linux drivers, of those I tested, including sundtek_installer_150228.114609 and newer don't work with dvb-t2.


Can you please correct the code in the drivers so that a any new driver you release will work with both dvb-t and dvb-t2 frequencies.

2
VU+ - VU Duo Settopbox / Re:Media TV Digital Home III and T2
« am: Mai 14, 2015, 11:31:51 Nachmittag »
I have tried out the command to manually tune DVBT2 and the command to blindscan DVBT2. No luck on either commands.

If no one has any other suggestions what to try, I will move the vu+ to a friends house which is equipped with a newly bought roof antenna. If the usb tuner can't find DVB-T2 channels there either, my antenna can't be the source of the problem.

Thanks for your help so far. Will report back my results.

3
VU+ - VU Duo Settopbox / Re:Media TV Digital Home III and T2
« am: Mai 13, 2015, 11:21:13 Nachmittag »
If the signal strength is to low, how come it works directly in my lcd tv and with the pctv nanostick 290e?

4
VU+ - VU Duo Settopbox / Re:Media TV Digital Home III and T2
« am: Mai 13, 2015, 09:08:38 Nachmittag »
If I try to watch a dvb-t2 channel with the sundtek usb tuner on the duo2 I get 57 % in SNR level. So the tuner detects there something on the frequency, but I get black picture. 57 % don't seem much but if a watch a dvb-t channel I only have 37 % in SNR and no pixelation in picture. It seems that the sundtek tuner gives very low SNR values in Black Hole.

I have also tried the tuner in Windows/MediaPortal with same result. No picture on dvb-t2 channels but on dvb-t channels I get picture.

Can it be some tuning parameters that isn't handled correctly in the drivers?

5
VU+ - VU Duo Settopbox / Re:Media TV Digital Home III and T2
« am: Mai 12, 2015, 04:44:04 Nachmittag »
I get 12 frequencies but not the frequency which is broadcasting in dvb-t2.

If I connect a new LCD TV which is DVB-T2 compatible to the antenna, I perfectly fine receive channels on the dvb-t2 frequency.

If I swap usb tuner and connect a PCTV nanostick 290e usb stick to the same vuduo2 I perfectly fine find the DVB-T2 channels if I search and I can also watch them with no problem.

If I then try to watch the dvb-t2 channels with the sundtek usb tuner on my duo2 (channel search done by pctv 290e), I can't get any picture.

(When I test I only have one usb tuner connected.)

Bug in drivers? Problem with hardware?

6
VU+ - VU Duo Settopbox / Re:Media TV Digital Home III and T2
« am: Mai 11, 2015, 09:13:30 Nachmittag »
Thanks for your answer.
Don't know exactly which setting you mean but I have tried two things.

First attempt
Setting in Sundtek Control Center: dvb-t2
Manual search on frequency which contains dvb-t2 channels with dvb-t as search setting.
Result: Nothing found

Second attempt
Setting in Sundtek Control Center: dvb-t
Manual search on frequency which contains dvb-t2 channels with dvb-t as search setting.
Result: Nothing found

Any suggestions what's wrong?

7
VU+ - VU Duo Settopbox / Re:Media TV Digital Home III and T2
« am: Mai 11, 2015, 05:38:11 Nachmittag »
Hi.

I am trying to get DVB-T2 to work with my Vu+ Duo2 and a Sundtek MediaTV Digital Home III dvb-c/t/t2 usb tuner.

The duo2 is equipped with 4 internal DVB-S2 tuners (2 dual tuners) and one usb MediaTV Digital Home III tuner. I have BlackHole 2.1.5 installed. The usb drivers in the duo2 is installed with Sundtek Software Installer. The usb tuner is configured as dvb-t2 in Sundtek Control Center.

If I search for terrestrial channels which are dvb-t and choose dvb-t as search setting, the usb tuner discovers channels and I am able to watch those channels on the duo2. If I try to search for dvb-t2 channels and choose dvb-t2 or dvb-t as search settings, nothing is found on the dvb-t2 frequency.

If I list the available tuners in the duo2 I get this:

root@vuduo2:~# cat /proc/bus/nim_sockets
NIM Socket 0:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(AVL6222)
        Frontend_Device: 0
        I2C_Device: 2
NIM Socket 1:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(AVL6222)
        Frontend_Device: 1
        I2C_Device: 2
NIM Socket 2:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(AVL6222)
        Frontend_Device: 2
        I2C_Device: 4
NIM Socket 3:
        Type: DVB-S2
        Name: Vuplus DVB-S NIM(AVL6222)
        Frontend_Device: 3
        I2C_Device: 4

NIM Socket 4:
        Type: DVB-T2
        Name: Sundtek DVB-T2 (III) (0/0) (USB)DVB-T2
        Frontend_Device: 4root@vuduo2:~#

NIM Socket 4 has not complete information. Does this indicate problems with the usb tuner?

Seiten: [1]