Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - diverseft

Seiten: [1]
1
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re:Sundtek DVB-S2 - Synology - TVHeadend
« am: Januar 08, 2014, 04:52:52 Nachmittag »
Yes - Logged here: https://tvheadend.org/boards/5/topics/10307

2
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Re:Sundtek DVB-S2 - Synology - TVHeadend
« am: Januar 08, 2014, 03:34:06 Nachmittag »
Thanks Sundtek

The adapter is definitely showing up in TVHeadend no problem. and it finds mux's and services. its just trying to display those services gives the "No service enabled" errors. If  Sundtek adapter shows up fine in TVHeadend, should I assume all is working in terms of the device/driver?

3
{Single, Dual, Quad} Sundtek SkyTV Ultimate / Sundtek DVB-S2 - Synology - TVHeadend
« am: Januar 08, 2014, 01:01:47 Nachmittag »
Hi All

I am having a few issues getting TV up and running. Here is my setup:

Mac Mini with XBMC
Synology DS1513+
TVheadend install on Synology
Sundtek DVBS2 USB dongle

I installed the sundtek driver:

# cd /tmp
# wget http://www.sundtek.de/media/sundtek_netinst.sh
# chmod 777 sundtek_netinst.sh
# sudo ./sundtek_netinst.sh

The install went fine and I did not take any further action in terms of setting up the device - Here is a pastebin of the install http://pastebin.com/MJR68pYj

I then went into TVHeadend and the device is seen straight away. I then did a scan for Astra 28 (I am based in SE London) and loads of services where found. I then mapped the services to channels.

When I go into XBMC to view tv, I get "Tvheadend HTSP Client No service enabled". If i check the live log in TVHeadend I get:

Media Center : Skipping "Sundtek DVB-S/S2 (III)/Astra: 10,773,000 kHz (Default (Port 0, Universal LNB))/BBC 2 England" -- Not Enabled

To rule out it being a sundtek device issue, Is there anything else i need to do in terms of setting up the device?

I took no further action on this part of the setup:

IMPORTANT: in order to use the device on your Synology NAS
           run "export LD_PRELOAD=/opt/lib/libmediaclient.so"
           and afterwards start your TV Application

           you can also place this in the start script of eg.
           tvheadend in order to initialize it automatically


Starting driver...
Setting up autostart (/etc/rc)
Driver is already installed in /etc/rc.local

Should I have done this?

Thanks

4
{Single, Dual, Quad} Sundtek SkyTV Ultimate / No light on DVB S2
« am: September 07, 2012, 09:03:53 Nachmittag »
Hi guys

Hi have bought a new DVB S2 and wanted to use it in conjunction with Synology ds712+ and TVheadend. From reading various posts it seems this setup is possible and Sundtek DVB S2 will work with synology OS. So i carried out the Sundtek installation instructions:

http://support.sundtek.com/index.php/topic,521.0.html

# cd /tmp
# wget http://www.sundtek.de/media/sundtek_netinst.sh
# chmod 777 sundtek_netinst.sh
# sudo ./sundtek_netinst.sh

In Synology i logged on as: ssh root@IP to carry out the commands. All worked except the the last sudo command. As im logged in as root i dont think i need to run as sudo anyway?

Everything installs fine. With coax cable from dish plugged into DVB S2 and the DVBs2 plugged into the synology, there are no lights on the device, it seems like it is dead. The device does not show up in TVHeadend (TVHeaded is installed on Synology and working fine)

Does anyone see anything i have done wrong. Is the device faulty. Its brand new out of the box.

Thanks

t

Seiten: [1]