Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - RonH

Seiten: [1]
1
Sundtek MediaTV Pro (Europe) / Re:Installation on a Dreambox settopbox
« am: September 15, 2012, 07:46:55 Nachmittag »
Hi, sorry for my late reply, had 'some' troubles with my receiver.

Thanks for the script, it works now.
There's just one typo, the last line has to start with ./ :)

2
Sundtek MediaTV Pro (Europe) / Re:Installation on a Dreambox settopbox
« am: Juni 15, 2012, 09:15:29 Nachmittag »
Is this Markus? I'm not familiar that you answer so short.  :(

I've read the complete thread, and I don't find anything about the  sundtek control center.
I just want a command to start it automatically, is that so hard?
Your installation manual in this thread is so complete, but only this thing is missing.

3
Sundtek MediaTV Pro (Europe) / Re:Installation on a Dreambox settopbox
« am: Juni 15, 2012, 07:23:44 Nachmittag »
Just edited my former post: The Sundtek stick was already installed and working, it's only the second stick which I have to activate every time after a reboot.

4
Sundtek MediaTV Pro (Europe) / Re:Installation on a Dreambox settopbox
« am: Juni 15, 2012, 07:14:19 Nachmittag »
What does that do? Can you give a bit more information?
I already installed a sundtek stick, and that's working fine, so all drivers are installed and working fine. It's only with this second stick that after every reboot, I have to activate the second adopter as you can read on the first page.

5
Sundtek MediaTV Pro (Europe) / Re:Installation on a Dreambox settopbox
« am: Juni 15, 2012, 06:08:26 Nachmittag »
Hi Markus,

It has been a while ago, but now I've purchased a second adapter. I've followed the instructions, and my VU+Duo sees the 2 adapters, very good! But...
When I reboot, I only see one tuner, and have to do the lines:
/opt/bin/mediaclient --enabledreambox=/dev/dvb/adapter1/frontend0
/opt/bin/mediaclient --enabledreambox=/dev/dvb/adapter2/frontend0

Again, manually.
How do I force this will happen automatically every reboot?

6
Sundtek MediaTV Pro (Europe) / Re:problems Sundtek MediaTV Digital Home and openPLi
« am: März 27, 2012, 11:16:28 Vormittag »
As I already wrote in another thread, I'm facing the same problems. I hope you can reproduce the problem, and find a solution for this. DVB-S keeps running but all the cable channels have 0% signal and don't function anymore untill a powercycle.

Configuration: Vu+Duo with OpenPli 2.1 and the latest updates, and one SundTek DVB-T/C stick.

7
Sundtek MediaTV Pro (Europe) / Re:Installation on a Dreambox settopbox
« am: März 27, 2012, 09:00:55 Vormittag »
As I said, everything is working now.
But there is one fault with the Sundtek in combination with OpenPli. I can switch from DVB-T to DVB-C and back to DVB-T whithout any problems. But if I want to go back to DVB-C once more, it stops working. Only DVB-T will work from then on. The Sundtek doesn't do anything anymore, and says it has 0% signal.

Only a powercycle will resolve that issue, untill you switch from DVB-T to DVB-C for the second time. I guess it's a driver problem. I hope you can reproduce this problem, and resolve this. (it's a common problem with Sundtek if you search the internet)

8
Sundtek MediaTV Pro (Europe) / Re:Installation on a Dreambox settopbox
« am: März 26, 2012, 03:42:44 Nachmittag »
Very clear :)

Thanks for all your quick support, wish all people were like this!

9
Sundtek MediaTV Pro (Europe) / Re:Installation on a Dreambox settopbox
« am: März 26, 2012, 02:41:00 Nachmittag »
Ok...
Is it wise to run the DVB_C_Tuner_starten.sh?
Or can I leave it this way with the Sundtek.conf file?

Zitat von: Sundtek am März 26, 2012, 02:35:26 Nachmittag
DVB_C_Tuner_autostart.sh

only means to autostart the tuner after the reboot

DVB_C_Tuner_starten.sh

means immediately start E2 with DVB-C tuner support

In case you started the first script only it's understandable that nothing happened since it just deploys the autostart scripts

10
Sundtek MediaTV Pro (Europe) / Re:Installation on a Dreambox settopbox
« am: März 26, 2012, 01:54:24 Nachmittag »
It works now. I also had a thread on the OpenPli forum and there they adviced me to make a sundtek.conf in the /etc folder. And the sundtek.conf looks like this:

[serial_sundtek]
initial_dvb_mode=DVBC
dreambox_support_fe1=on

The serial can be retrieved by: /opt/bin/mediaclient -e
And now the VU+Duo sees the tuner as a DVB-C tuner!

11
Sundtek MediaTV Pro (Europe) / Re:Installation on a Dreambox settopbox
« am: März 26, 2012, 12:44:05 Nachmittag »
I've run the DVB_Tuner_kein_autostart.sh to clear the DVB-T tuner autostart. Then I ran the DVB_C_Tuner_autostart.sh to enable the DVB-C tuner. But after a reboot the box still says it has: TunerC: Sundtek MediaTV Digital Home (USDVB-T (DVB-T)
And not DVB-C ... :(

Do I really have to powercycle the box to get it right?

12
Sundtek MediaTV Pro (Europe) / Re:Installation on a Dreambox settopbox
« am: März 26, 2012, 11:45:56 Vormittag »
Zitat von: Sundtek am März 26, 2012, 11:38:11 Vormittag
Did you run the DVB_C_Tuner_starten.sh script?
I'm starting to doubt wether I ran the DVB_T_Tuner by mistake. I've run the DVB_Tuner_kein_autostart.sh now, followed by DVB_C_Tuner_autostart.sh
I'm not at home at the moment (Just could make an ssh shell to the box from work). I'll give it a try when I'm back home, and let you know.

Thanks for the quick support!

13
Sundtek MediaTV Pro (Europe) / Re:Installation on a Dreambox settopbox
« am: März 26, 2012, 11:32:28 Vormittag »
Last weekend I've tried to install the "Sundtek MediaTV Pro (DVB-CT, Radio, AnalogTV)" on a VU+Duo with OpenPli 2.1 with the last updates. I've used your installation manual (see link). The VU+Duo sees the tuner, but thinks it's a DVB-T tuner. But I need the DVB-C tuner.

What am I doing wrong?

Seiten: [1]