1
Sundtek MediaTV Pro / Re:RaspberryPi 2 mit zwei MediaTV Pro möglich?
« am: April 24, 2018, 05:14:47 Nachmittag »
Reicht da 1 Meter Kabel oder sollten es 2 sein?
Beiträge anzeigen
Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.
Seiten: [1]
2
Sundtek MediaTV Pro / Re:RaspberryPi 2 mit zwei MediaTV Pro möglich?
« am: April 23, 2018, 10:13:02 Nachmittag »
Hallo,
ich reihe mich hier mal ein.
Ich habe mitlerweile 2 MediaTV Pro DVB-C im Einsatz.
Jeder für sich, einzeln am Pi 3b, oder am aktivem USB-HUB funktioniert in TvHeadend tadellos ohne Probleme (max. 5 Kontinuitätsfehler in 8 Stunden.)
Betreibe ich beide parallel am pi direkt oder am aktivem Hub schnellen die Kontinuitätsfehler in die Höhe.
Ich gehe somit davon aus, dass die einzelnen Tuner Ok sind. Beim Test parallel oder einzeln bleiben die Tuner an der DVB-C Weiche.
Kann ich hier noch was machen oder liegt es an der I/O bzw. fehlenden Processing Power des PIs?
Beim genutzen Hub handelt es sich um folgendes Modell mit Netzteil :
https://www.amazon.de/UGREEN-Super-Speed-Verteiler-Schwarz/dp/B00OQ0CYFE/ref=pd_bxgy_147_img_3?_encoding=UTF8&psc=1&refRID=WTC35CZEZ70FAE7784JJ
ich reihe mich hier mal ein.
Ich habe mitlerweile 2 MediaTV Pro DVB-C im Einsatz.
Jeder für sich, einzeln am Pi 3b, oder am aktivem USB-HUB funktioniert in TvHeadend tadellos ohne Probleme (max. 5 Kontinuitätsfehler in 8 Stunden.)
Betreibe ich beide parallel am pi direkt oder am aktivem Hub schnellen die Kontinuitätsfehler in die Höhe.
Ich gehe somit davon aus, dass die einzelnen Tuner Ok sind. Beim Test parallel oder einzeln bleiben die Tuner an der DVB-C Weiche.
Kann ich hier noch was machen oder liegt es an der I/O bzw. fehlenden Processing Power des PIs?
Beim genutzen Hub handelt es sich um folgendes Modell mit Netzteil :
https://www.amazon.de/UGREEN-Super-Speed-Verteiler-Schwarz/dp/B00OQ0CYFE/ref=pd_bxgy_147_img_3?_encoding=UTF8&psc=1&refRID=WTC35CZEZ70FAE7784JJ
3
Sundtek MediaTV Pro / RPI3: Teilweise kein Zugriff mehr auf Adapter nach Update stretch
« am: Februar 19, 2018, 10:58:14 Nachmittag »
Hallo zusammen,
meine beiden Sundtek MediaTV Pro III am RPI 3 werden von minisatip nach Update auf stretch leider nicht mehr erkannt.
Ich habe testweise tvheadend installiert. Dort werden die Adapter ohne Probleme erkannt und funktionieren auch tadellos.
Vielleicht hat ja jemand eine Idee, was ich noch machen kann.
Vorab vielen Dank!
meine beiden Sundtek MediaTV Pro III am RPI 3 werden von minisatip nach Update auf stretch leider nicht mehr erkannt.
Ich habe testweise tvheadend installiert. Dort werden die Adapter ohne Probleme erkannt und funktionieren auch tadellos.
Vielleicht hat ja jemand eine Idee, was ich noch machen kann.
Vorab vielen Dank!
Code: [Auswählen]
pi@TvH:~/minisatip $ ./minisatip -f -l dvb
[17/02 11:29:36.748 main]: minisatip version 0.7.15, compiled with s2api version: 050A
[17/02 11:29:36.749 main]: Built with dvbcsa
[17/02 11:29:36.749 main]: Built with CI
[17/02 11:29:36.749 main]: Built with dvbapi
[17/02 11:29:36.749 main]: Built with AES (OpenSSL)
[17/02 11:29:36.749 main]: Built with tables processing
[17/02 11:29:36.749 main]: Built with pmt processing
[17/02 11:29:36.749 main]: Built with satip client
[17/02 11:29:36.749 main]: Built with linux dvb client
[17/02 11:29:36.749 main]: Built with backtrace
[17/02 11:29:36.749 main]: Built without netceiver
[17/02 11:29:36.750 main]: New UDP socket 3 bound to 0.0.0.0:1900
[17/02 11:29:36.750 main]: setting multicast for 239.255.255.250
[17/02 11:29:36.750 main]: New UDP socket 4 bound to 239.255.255.250:1900
[17/02 11:29:36.750 main]: Mutex init 0x78f20
[17/02 11:29:36.750 main]: Mutex init 0x17ebd58
[17/02 11:29:36.750 main]: sockets_add: handle 3 (type 0) returning socket index 0 [0.0.0.0:0] read: 0x1b628
[17/02 11:29:36.751 main]: Mutex init 0x17ebe58
[17/02 11:29:36.751 main]: sockets_add: handle 4 (type 0) returning socket index 1 [0.0.0.0:0] read: 0x1b628
[17/02 11:29:36.751 main]: Mutex init 0x17ebf58
[17/02 11:29:36.751 main]: sockets_add: handle 5 (type 2) returning socket index 2 [0.0.0.0:0] read: 0x1b3b8
[17/02 11:29:36.751 main]: Mutex init 0x17ec058
[17/02 11:29:36.751 main]: sockets_add: handle 6 (type 2) returning socket index 3 [0.0.0.0:0] read: 0x1b3b8
[17/02 11:29:36.751 main]: Mutex init 0x17ec158
[17/02 11:29:36.751 main]: sockets_add: handle -2 (type 0) returning socket index 4 [0.0.0.0:0] read: 0x1b628
[17/02 11:29:36.751 main]: set_socket_thread: thread 76b812d0 for sockets 4
[17/02 11:29:36.751 signal]: Starting select_and_execute on thread ID 76b812d0, thread_name signal
[17/02 11:29:36.751 main]: Mutex init 0x17ec2f0
[17/02 11:29:36.751 main]: sockets_add: handle -2 (type 0) returning socket index 5 [0.0.0.0:0] read: 0x1b628
[17/02 11:29:36.751 main]: set_socket_thread: thread 76b812d0 for sockets 5
[17/02 11:29:36.752 main]: Mutex init 0x7a628
[17/02 11:29:36.752 main]: Mutex init 0x7a670
[17/02 11:29:36.763 main]: Mutex init 0x84f38
[17/02 11:29:36.763 main]: Mutex init 0x17fc4a8
[17/02 11:29:36.764 main]: sockets_add: handle -2 (type 0) returning socket index 6 [0.0.0.0:0] read: 0x1b628
[17/02 11:29:36.764 main]: Mutex init 0x79ac8
[17/02 11:29:36.764 main]: starting init_all_hw 0
[17/02 11:29:36.764 main]: Mutex init 0x791e0
[17/02 11:29:36.764 main]: find_dvb_adapter: adding 0 0 to the list of devices
[17/02 11:29:36.765 main]: find_dvb_adapter: adding 1 0 to the list of devices
[17/02 11:29:36.807 main]: Mutex init 0x17f99c0
[17/02 11:29:36.807 main]: trying to open [0] adapter 0 and frontend 0
[17/02 11:29:36.831 main]: Could not open /dev/dvb/adapter0/frontend0 in RW mode (fe: -1, dvr: -1) error 6: No such device or address
[17/02 11:29:36.831 main]: opening adapter 0 failed
[17/02 11:29:36.831 main]: Failed to init device 0 with return value 1
[17/02 11:29:36.831 main]: Mutex init 0x17fa930
[17/02 11:29:36.832 main]: trying to open [1] adapter 1 and frontend 0
[17/02 11:29:36.855 main]: Could not open /dev/dvb/adapter1/frontend0 in RW mode (fe: -1, dvr: -1) error 6: No such device or address
[17/02 11:29:36.855 main]: opening adapter 1 failed
[17/02 11:29:36.855 main]: Failed to init device 1 with return value 1
[17/02 11:29:36.855 main]: done init_hw 0
[17/02 11:29:36.855 main]: Initializing with 0 devices
[17/02 11:29:36.855 main]: Starting select_and_execute on thread ID 76fc9000, thread_name main
Code: [Auswählen]
pi@TvH:~/minisatip $ /opt/bin/mediaclient --lc
**** List of Media Clients ****
/dev/dvb/adapter0/frontend0:
No client connected
/dev/dvb/adapter0/dvr0:
No client connected
/dev/dvb/adapter0/demux0:
No client connected
/dev/video0:
No client connected
/dev/vbi0:
No client connected
/dev/radio0:
No client connected
/dev/rds0:
No client connected
/dev/mediainput0:
No client connected
/dev/dsp0:
No client connected
/dev/dvb/adapter1/frontend0:
No client connected
/dev/dvb/adapter1/dvr0:
No client connected
/dev/dvb/adapter1/demux0:
No client connected
/dev/video1:
No client connected
/dev/vbi1:
No client connected
/dev/radio1:
No client connected
/dev/rds1:
No client connected
/dev/mediainput1:
No client connected
/dev/dsp1:
No client connected
Code: [Auswählen]
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.59-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #1047 SMP Sun Oct 29 12:19:23 GMT 2017
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] cma: Reserved 8 MiB at 0x2f800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 196608
[ 0.000000] free_area_init_node: node 0, pgdat 80c6f380, node_mem_map af136000
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 14 pages/cpu @af0f0000 s25600 r8192 d23552 u57344
[ 0.000000] pcpu-alloc: s25600 r8192 d23552 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194880
[ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=c025b11c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 757664K/786432K available (7168K kernel code, 486K rwdata, 2012K rodata, 1024K init, 770K bss, 20576K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xb0800000 - 0xff800000 (1264 MB)
lowmem : 0x80000000 - 0xb0000000 ( 768 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80800000 (8160 kB)
.init : 0x80b00000 - 0x80c00000 (1024 kB)
.data : 0x80c00000 - 0x80c79834 ( 487 kB)
.bss : 0x80c7b000 - 0x80d3b964 ( 771 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000023] Switching to timer-based delay loop, resolution 52ns
[ 0.000304] Console: colour dummy device 80x30
[ 0.001196] console [tty1] enabled
[ 0.001239] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.001307] pid_max: default: 32768 minimum: 301
[ 0.001637] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001679] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002707] Disabling memory control group subsystem
[ 0.002812] CPU: Testing write buffer coherency: ok
[ 0.002874] ftrace: allocating 22392 entries in 66 pages
[ 0.049998] CPU0: update cpu_capacity 1024
[ 0.050050] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.050109] Setting up static identity map for 0x100000 - 0x100034
[ 0.052003] CPU1: update cpu_capacity 1024
[ 0.052010] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.052700] CPU2: update cpu_capacity 1024
[ 0.052706] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.053382] CPU3: update cpu_capacity 1024
[ 0.053388] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.053477] Brought up 4 CPUs
[ 0.053649] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.053679] CPU: All CPU(s) started in HYP mode.
[ 0.053705] CPU: Virtualization extensions available.
[ 0.054498] devtmpfs: initialized
[ 0.065721] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.066033] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.066095] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.066654] pinctrl core: initialized pinctrl subsystem
[ 0.067586] NET: Registered protocol family 16
[ 0.069843] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.078707] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.078756] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.078919] Serial: AMBA PL011 UART driver
[ 0.080849] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.081402] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.150832] bcm2835-dma 3f007000.dma: DMA legacy API manager at b080f000, dmachans=0x1
[ 0.152698] SCSI subsystem initialized
[ 0.152874] usbcore: registered new interface driver usbfs
[ 0.152975] usbcore: registered new interface driver hub
[ 0.153090] usbcore: registered new device driver usb
[ 0.159803] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-10-24 17:09
[ 0.161206] clocksource: Switched to clocksource arch_sys_counter
[ 0.208350] VFS: Disk quotas dquot_6.6.0
[ 0.208461] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.208691] FS-Cache: Loaded
[ 0.208962] CacheFiles: Loaded
[ 0.221149] NET: Registered protocol family 2
[ 0.222078] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.222215] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.222425] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.222538] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.222605] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.222836] NET: Registered protocol family 1
[ 0.223268] RPC: Registered named UNIX socket transport module.
[ 0.223300] RPC: Registered udp transport module.
[ 0.223328] RPC: Registered tcp transport module.
[ 0.223356] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.224315] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.226647] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.242713] FS-Cache: Netfs 'nfs' registered for caching
[ 0.243717] NFS: Registering the id_resolver key type
[ 0.243776] Key type id_resolver registered
[ 0.243804] Key type id_legacy registered
[ 0.246241] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.246387] io scheduler noop registered
[ 0.246418] io scheduler deadline registered (default)
[ 0.246714] io scheduler cfq registered
[ 0.252393] BCM2708FB: allocated DMA memory ef910000
[ 0.252447] BCM2708FB: allocated DMA channel 0 @ b080f000
[ 0.261149] Console: switching to colour frame buffer device 82x26
[ 0.269601] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.272025] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.277176] vc-sm: Videocore shared memory driver
[ 0.294533] brd: module loaded
[ 0.305770] loop: module loaded
[ 0.308154] Loading iSCSI transport class v2.0-870.
[ 0.311003] usbcore: registered new interface driver smsc95xx
[ 0.313356] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.543698] Core Release: 2.80a
[ 0.545953] Setting default values for core params
[ 0.548252] Finished setting default values for core params
[ 0.750982] Using Buffer DMA mode
[ 0.753269] Periodic Transfer Interrupt Enhancement - disabled
[ 0.755556] Multiprocessor Interrupt Enhancement - disabled
[ 0.757862] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.760182] Dedicated Tx FIFOs mode
[ 0.762845] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xaf904000 dma = 0xef904000 len=9024
[ 0.767741] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.779375] dwc_otg: Microframe scheduler enabled
[ 0.779425] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x8058f5b0
[ 0.781733] WARN::hcd_init_fiq:460: FIQ ASM at 0x8058f920 length 36
[ 0.784060] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb087a000
[ 0.786418] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.788735] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.791096] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.793437] Init: Port Power? op_state=1
[ 0.795695] Init: Power Port (0)
[ 0.798079] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.800390] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.802717] usb usb1: Product: DWC OTG Controller
[ 0.804972] usb usb1: Manufacturer: Linux 4.9.59-v7+ dwc_otg_hcd
[ 0.807247] usb usb1: SerialNumber: 3f980000.usb
[ 0.810321] hub 1-0:1.0: USB hub found
[ 0.812552] hub 1-0:1.0: 1 port detected
[ 0.815289] dwc_otg: FIQ enabled
[ 0.815294] dwc_otg: NAK holdoff enabled
[ 0.815298] dwc_otg: FIQ split-transaction FSM enabled
[ 0.815311] Module dwc_common_port init
[ 0.815547] usbcore: registered new interface driver usb-storage
[ 0.817916] mousedev: PS/2 mouse device common for all mice
[ 0.821050] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.823607] bcm2835-cpufreq: min=600000 max=1200000
[ 0.826259] sdhci: Secure Digital Host Controller Interface driver
[ 0.828582] sdhci: Copyright(c) Pierre Ossman
[ 0.831113] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[ 0.835707] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ 0.838258] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.843318] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.845977] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.848648] usbcore: registered new interface driver usbhid
[ 0.851113] usbhid: USB HID core driver
[ 0.854379] vchiq: vchiq_init_state: slot_zero = 0xaf980000, is_master = 0
[ 0.858244] [vc_sm_connected_init]: start
[ 0.866972] [vc_sm_connected_init]: end - returning 0
[ 0.869797] Initializing XFRM netlink socket
[ 0.872281] NET: Registered protocol family 17
[ 0.874826] Key type dns_resolver registered
[ 0.877630] Registering SWP/SWPB emulation handler
[ 0.880827] registered taskstats version 1
[ 0.889512] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.892125] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 0.898632] sdhost: log_buf @ af907000 (ef907000)
[ 0.981234] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.985960] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.988453] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 1.031302] Indeed it is in host mode hprt0 = 00021501
[ 1.121081] random: fast init done
[ 1.121354] of_cfs_init
[ 1.121491] of_cfs_init: OK
[ 1.128007] Waiting for root device PARTUUID=c025b11c-02...
[ 1.145444] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.149182] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.152932] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.157788] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.164965] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.171990] mmc0: new high speed SDHC card at address aaaa
[ 1.174772] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 1.179584] mmcblk0: p1 p2
[ 1.231234] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.233483] Indeed it is in host mode hprt0 = 00001101
[ 1.255344] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.259530] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.272126] devtmpfs: mounted
[ 1.297279] Freeing unused kernel memory: 1024K
[ 1.328383] mmc1: new high speed SDIO card at address 0001
[ 1.461543] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.463938] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.467182] hub 1-1:1.0: USB hub found
[ 1.469648] hub 1-1:1.0: 5 ports detected
[ 1.791256] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.880274] systemd[1]: System time before build time, advancing clock.
[ 1.921571] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 1.924353] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.929915] smsc95xx v1.0.5
[ 2.012171] NET: Registered protocol family 10
[ 2.025141] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:75:c3:bf
[ 2.035087] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.053666] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 2.062708] systemd[1]: Detected architecture arm.
[ 2.085187] systemd[1]: Set hostname to <TvH>.
[ 2.321260] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 2.454173] usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0610
[ 2.456989] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.459798] usb 1-1.2: Product: USB2.0 Hub
[ 2.462536] usb 1-1.2: Manufacturer: GenesysLogic
[ 2.466166] hub 1-1.2:1.0: USB hub found
[ 2.469069] hub 1-1.2:1.0: 4 ports detected
[ 2.781267] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 2.782755] systemd[1]: xrdp.service: Cannot add dependency job, ignoring: Unit xrdp.service is masked.
[ 2.783327] systemd[1]: xrdp-sesman.service: Cannot add dependency job, ignoring: Unit xrdp-sesman.service is masked.
[ 2.783892] systemd[1]: guacd.service: Cannot add dependency job, ignoring: Unit guacd.service is masked.
[ 2.790351] systemd[1]: Reached target Swap.
[ 2.824050] systemd[1]: Listening on Syslog Socket.
[ 2.829867] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.836017] systemd[1]: Listening on Journal Socket.
[ 2.946818] usb 1-1.3: New USB device found, idVendor=05dc, idProduct=a838
[ 2.949414] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.952086] usb 1-1.3: Product: USB Flash Drive
[ 2.954528] usb 1-1.3: Manufacturer: Lexar
[ 2.954535] usb 1-1.3: SerialNumber: AAXJZ8CD28PVG1U3
[ 2.962015] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 2.962828] scsi host0: usb-storage 1-1.3:1.0
[ 3.317332] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 3.423734] systemd-journald[137]: Received request to flush runtime journal from PID 1
[ 3.745631] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 4.091772] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[ 4.097652] usbcore: registered new interface driver brcmfmac
[ 4.214527] scsi 0:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 6
[ 4.216608] sd 0:0:0:0: [sda] 125038592 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 4.219655] sd 0:0:0:0: [sda] Write Protect is off
[ 4.219675] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 4.220579] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.243428] sda: sda1
[ 4.247950] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.271254] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.362749] brcmfmac: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 4.363542] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14
[ 4.611257] usb 1-1.4: new high-speed USB device number 7 using dwc_otg
[ 4.640120] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.742119] usb 1-1.4: New USB device found, idVendor=0781, idProduct=5590
[ 4.742133] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.742141] usb 1-1.4: Product: Ultra
[ 4.742149] usb 1-1.4: Manufacturer: SanDisk
[ 4.742157] usb 1-1.4: SerialNumber: 4C530001230614108492
[ 4.743158] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 4.744614] scsi host1: usb-storage 1-1.4:1.0
[ 4.841258] usb 1-1.2.3: new high-speed USB device number 8 using dwc_otg
[ 4.974045] usb 1-1.2.3: New USB device found, idVendor=2659, idProduct=1210
[ 4.974057] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.974065] usb 1-1.2.3: Product: MediaTV Pro III (EU)
[ 4.974073] usb 1-1.2.3: Manufacturer: Sundtek
[ 4.974081] usb 1-1.2.3: SerialNumber: U140614125037
[ 5.081246] usb 1-1.2.4: new high-speed USB device number 9 using dwc_otg
[ 5.214039] usb 1-1.2.4: New USB device found, idVendor=2659, idProduct=1210
[ 5.214051] usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.214060] usb 1-1.2.4: Product: MediaTV Pro III (EU)
[ 5.214067] usb 1-1.2.4: Manufacturer: Sundtek
[ 5.214075] usb 1-1.2.4: SerialNumber: U170318111809
[ 5.763283] scsi 1:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
[ 5.764479] sd 1:0:0:0: [sdb] 242614272 512-byte logical blocks: (124 GB/116 GiB)
[ 5.764611] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 5.765526] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.765541] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 5.771191] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 7.836880] random: crng init done
[ 9.165432] sdb: sdb1
[ 9.167519] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 9.463984] fuse init (API version 7.26)
[ 10.562913] uart-pl011 3f201000.serial: no DMA platform data
[ 11.167417] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.167435] brcmfmac: power management disabled
[ 11.476857] Adding 102396k swap on /var/swap. Priority:-1 extents:4 across:241660k SSFS
[ 11.613484] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 13.288909] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 15.226908] Bluetooth: Core ver 2.22
[ 15.227026] NET: Registered protocol family 31
[ 15.227032] Bluetooth: HCI device and connection manager initialized
[ 15.227067] Bluetooth: HCI socket layer initialized
[ 15.227095] Bluetooth: L2CAP socket layer initialized
[ 15.227126] Bluetooth: SCO socket layer initialized
[ 15.253513] Bluetooth: HCI UART driver ver 2.3
[ 15.253525] Bluetooth: HCI UART protocol H4 registered
[ 15.253530] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 15.253805] Bluetooth: HCI UART protocol Broadcom registered
[ 15.469427] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.469437] Bluetooth: BNEP filters: protocol multicast
[ 15.469459] Bluetooth: BNEP socket layer initialized
[ 16.207386] input: Sundtek Remote Control as /devices/virtual/input/input0
[ 22.759072] tun: Universal TUN/TAP device driver, 1.6
[ 22.759087] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 33.743152] usb 1-1.2.3: usbfs: process 490 (mediasrv) did not claim interface 0 before use
[ 35.236663] input: Sundtek Remote Control as /devices/virtual/input/input1
[ 39.036731] media: Linux media interface: v0.10
[ 39.062919] Linux video capture interface: v2.00
[ 39.078966] usb 1-1.2.4: usbfs: process 490 (mediasrv) did not claim interface 0 before use
Code: [Auswählen]
pi@TvH:~ $ /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [MediaTV Pro III (EU)] DVB-C, DVB-T, DVB-T2, ANALOG-TV, FM-RADIO, REMOTE-CONTROL, OSS-AUDIO, RDS
[INFO]:
STATUS: STANDBY
[BUS]:
ID: 1-1.5.3
[SERIAL]:
ID: U140614125037
[DVB-C,DVB-T,DVB-T2]:
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
[ANALOG-TV]:
VIDEO0: /dev/video0
VBI0: /dev/vbi0
[FM-RADIO]:
RADIO0: /dev/radio0
RDS: /dev/rds0
[REMOTECONTROL]:
INPUT0: /dev/mediainput0
[OSS]:
OSS0: /dev/dsp0
device 1: [MediaTV Pro III (EU)] DVB-C, DVB-T, DVB-T2, ANALOG-TV, FM-RADIO, REMOTE-CONTROL, OSS-AUDIO, RDS
[INFO]:
STATUS: ACTIVE
[BUS]:
ID: 1-1.5.4
[SERIAL]:
ID: U170318111809
[DVB-C,DVB-T,DVB-T2]:
FRONTEND: /dev/dvb/adapter1/frontend0
DVR: /dev/dvb/adapter1/dvr0
DMX: /dev/dvb/adapter1/demux0
[ANALOG-TV]:
VIDEO0: /dev/video1
VBI0: /dev/vbi1
[FM-RADIO]:
RADIO0: /dev/radio1
RDS: /dev/rds1
[REMOTECONTROL]:
INPUT0: /dev/mediainput1
[OSS]:
OSS0: /dev/dsp1
Code: [Auswählen]
pi@TvH:~ $ /opt/bin/mediaclient --readsignal=0 -d /dev/dvb/adapter1/frontend0
== reading digital TV signal ==
SIGNAL: [.............................. ] ( 92%) BER: 0 CNR: 36.70 FREQ: 114000000 Hz LOCKED: YES SYM: 6900000 MOD: QAM256
SIGNAL: [.............................. ] ( 92%) BER: 0 CNR: 36.70 FREQ: 114000000 Hz LOCKED: YES SYM: 6900000 MOD: QAM256
SIGNAL: [.............................. ] ( 92%) BER: 0 CNR: 36.70 FREQ: 114000000 Hz LOCKED: YES SYM: 6900000 MOD: QAM256
SIGNAL: [.............................. ] ( 92%) BER: 0 CNR: 36.70 FREQ: 114000000 Hz LOCKED: YES SYM: 6900000 MOD: QAM256
SIGNAL: [.............................. ] ( 92%) BER: 0 CNR: 36.70 FREQ: 114000000 Hz LOCKED: YES SYM: 6900000 MOD: QAM256
SIGNAL: [.............................. ] ( 92%) BER: 0 CNR: 36.70 FREQ: 114000000 Hz LOCKED: YES SYM: 6900000 MOD: QAM256
Seiten: [1]