3
« am: Dezember 13, 2010, 02:10:29 Nachmittag »
Hallo,
ich habe ebenfalls einen DVB-S2 USB-Stick und bekomme leider keinen Sendersuchlauf gestartet.
Weder mit Kaffeine oder w_scan ist ein Sendersuchlauf möglich:
w_scan -fs -s S19E2 -c DE -X > channels.conf
w_scan version 20091230 (compiled for DVB API 5.1)
using settings for 19.2 east Astra 1F/1G/1H/1KR/1L
frontend_type DVB-S, channellist 6
output format czap/tzap/szap/xine
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> DVB-S "Sundtek DVB-S/S2": very good :-))
Using DVB-S frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.1
frontend Sundtek DVB-S/S2 supports
INVERSION_AUTO
DVB-S
DVB-S2
using LNB "UNIVERSAL"
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
(time: 00:00)
(time: 00:04)
(time: 00:08) (time: 00:13) signal ok:
S f = 10744 kHz H SR = 22000 5/6 0,35 QPSK
Info: NIT(actual) filter timeout
(time: 00:26)
(time: 00:30)
(time: 00:34) (time: 00:38) signal ok:
S f = 10788 kHz V SR = 22000 5/6 0,35 QPSK
Info: NIT(actual) filter timeout
(time: 00:52)
(time: 00:56)
(time: 01:00)
(time: 01:05) (time: 01:09) signal ok:
S f = 10847 kHz V SR = 22000 5/6 0,35 QPSK
Info: NIT(actual) filter timeout
(time: 01:23)
Mein Linux hat folgende Konfiguration:
root@fluffy:~# cat /etc/debian_version
squeeze/sid
root@fluffy:~# uname -a
Linux fluffy 2.6.32-26-generic #48-Ubuntu SMP Wed Nov 24 10:14:11 UTC 2010 x86_64 GNU/Linux
Folgenden Treiber habe ich erfolgreich installiert:
/opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [Sundtek SkyTV Ultimate] DVB-S/S2
[DVB-S/S2]:
FRONTEND: /dev/dvb/adapter0/frontend0
DVR: /dev/dvb/adapter0/dvr0
DMX: /dev/dvb/adapter0/demux0
root@fluffy:~# /opt/bin/mediaclient --build
Build date: Dec 9 2010
root@fluffy:~# lsusb -v -d 'eb1a:51b2'
Bus 002 Device 003: ID eb1a:51b2 eMPIA Technology, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0xeb1a eMPIA Technology, Inc.
idProduct 0x51b2
bcdDevice 1.00
iManufacturer 3 Sundtek
iProduct 1 SkyTV Ultimate
iSerial 2 123456789ABCD
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
folgende fehlermeldung habe ich Logdir des Treibers:
root@fluffy:~# tail -5 /var/log/mediasrv.log
2010-12-12 16:17:03 [14480] TS Sync byte not aligned, realigning stream (0)
2010-12-12 16:17:03 [14480] TS Sync byte not aligned, realigning stream (0)
2010-12-12 16:17:03 [14480] TS Sync byte not aligned, realigning stream (0)
2010-12-12 16:17:03 [14480] TS Sync byte not aligned, realigning stream (0)
2010-12-12 16:17:03 [14480] TS Sync byte not aligned, realigning stream (0)
Wo liegt der Fehler, ich weiss nichtmehr weiter? Ich habe bereits einen normalen SAT-Receiver angeschlossen, der natürlich alle Sender findet.
mfg mjoern