Sundtek Support Forum

lspci:

00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS880 [Radeon HD 4250]
01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series]
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
04:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
05:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
05:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)

I have now updated the whole system to Debian wheezy.
But I have the similar disconnects on the USB.

Linux fractalxl 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u2 x86_64 GNU/Linux

Dmesg:
[ 2996.638394] ehci_hcd 0000:00:12.2: force halt; handshake ffffc9000061c024 00004000 00000000 -> -110
[ 2996.638406] ehci_hcd 0000:00:12.2: HC died; cleaning up
[ 2996.638463] usb 1-1: usbfs: usb_submit_urb returned -110
[ 2996.638549] usb 1-1: USB disconnect, device number 2
[ 2997.441723] irq 17: nobody cared (try booting with the "irqpoll" option)
[ 2997.441729] Pid: 0, comm: swapper/1 Tainted: P           O 3.2.0-4-amd64 #1 Debian 3.2.57-3+deb7u2
[ 2997.441732] Call Trace:
[ 2997.441734]  <IRQ>  [<ffffffff81092bad>] ? __report_bad_irq+0x2c/0xb5
[ 2997.441744]  [<ffffffff81092f6a>] ? note_interrupt+0x170/0x1f2
[ 2997.441748]  [<ffffffff8109132c>] ? handle_irq_event_percpu+0x15f/0x17d
[ 2997.441752]  [<ffffffff81013726>] ? read_tsc+0x5/0x14
[ 2997.441755]  [<ffffffff810662ed>] ? timekeeping_get_ns+0xd/0x2a
[ 2997.441758]  [<ffffffff8109137e>] ? handle_irq_event+0x34/0x52
[ 2997.441762]  [<ffffffff8106c189>] ? arch_local_irq_save+0x11/0x17
[ 2997.441765]  [<ffffffff810936e1>] ? handle_fasteoi_irq+0x7c/0xaf
[ 2997.441769]  [<ffffffff8100f9e1>] ? handle_irq+0x1d/0x21
[ 2997.441772]  [<ffffffff8100f5ba>] ? do_IRQ+0x42/0x98
[ 2997.441776]  [<ffffffff8134feee>] ? common_interrupt+0x6e/0x6e
[ 2997.441777]  <EOI>  [<ffffffff8102b36c>] ? native_safe_halt+0x2/0x3
[ 2997.441783]  [<ffffffff81014614>] ? default_idle+0x47/0x7f
[ 2997.441786]  [<ffffffff8101470b>] ? amd_e400_idle+0xbf/0xe4
[ 2997.441790]  [<ffffffff8100d24c>] ? cpu_idle+0xaf/0xf2
[ 2997.441793]  [<ffffffff81341dec>] ? start_secondary+0x1d5/0x1db
[ 2997.441795] handlers:
[ 2997.441819] [<ffffffffa007c121>] usb_hcd_irq
[ 2997.441826] [<ffffffffa007c121>] usb_hcd_irq
[ 2997.441833] [<ffffffffa007c121>] usb_hcd_irq
[ 2997.441842] [<ffffffffa004dcfd>] ata_bmdma_interrupt
[ 2997.441847] [<ffffffffa0062660>] ahci_interrupt
[ 2997.441849] Disabling IRQ #17

But I´m still having issues with random crashes.
It may work for about 10-30 min I think.

Tvheadend:
2014-07-03 14:08:33.456 [   INFO] subscription: 'scan' subscribing to mux, weight: 1, adapter: 'Sundtek DVB-C (III) : DVB-C #0', network: 'comhem', mux: '474000'
2014-07-03 14:08:36.892 [  ERROR] linuxdvb: Sundtek DVB-C (III) : DVB-C #0 - read() error 32 (Broken pipe)
2014-07-03 14:08:36.913 [   INFO] linuxdvb: adapter removed /dev/dvb/adapter0

Dmesg:
[ 1592.695802] [UFW BLOCK] IN=eth0 OUT= MAC=1c:6f:65:ad:eb:f5:00:11:32:15:03:0a:08:00 SRC=192.168.10.102 DST=192.168.10.100 LEN=371 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=10133 LEN=351
[ 1607.297912] ehci_hcd 0000:00:12.2: force halt; handhake ffffc9000063c024 00004000 00000000 -> -110
[ 1607.297954] usb 2-1: usbfs: usb_submit_urb returned -110
[ 1607.297973] ehci_hcd 0000:00:12.2: HC died; cleaning up
[ 1607.298010] usb 2-1: USB disconnect, address 2

When trying to scan DVB-C MUX the Linux (Debian) driver crash.
I´m using the latest driver from http://sundtek.de/media/sundtek-netinst-driver.deb

device 0: [MediaTV Pro III USB (EU)]  DVB-C, DVB-T, DVB-T2, ANALOG-TV, FM-RADIO, REMOTE-CONTROL, OSS-AUDIO, RDS
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 3-4
  [SERIAL]:
     ID: U140614125125
  [DVB-C]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [DVB-T]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [DVB-T2]:
     FRONTEND: /dev/dvb/adapter0/frontend0
     DVR: /dev/dvb/adapter0/dvr0
     DMX: /dev/dvb/adapter0/demux0
  [ANALOG-TV]:
     VIDEO0: /dev/video0
     VBI0: /dev/vbi0
  [FM-RADIO]:
     RADIO0: /dev/radio0
     RDS: /dev/rds0
  [REMOTECONTROL]:
     INPUT0: /dev/mediainput0
  [OSS]:
     OSS0: /dev/dsp0


When trying to start Tvheadend:
2014-07-03 03:31:55.771 [   INFO] mpegts: 346000 - tuning on Sundtek DVB-C (III) : DVB-C #0
2014-07-03 03:31:55.831 [   INFO] subscription: 'scan' subscribing to mux, weight: 4, adapter: 'Sundtek DVB-C (III) : DVB-C #0', network: 'comhem', mux: '346000', hostname: '<N/A>', username: '<N/A>', client: '<N/A>'
2014-07-03 03:31:55.920 [  ERROR] linuxdvb: Sundtek DVB-C (III) : DVB-C #0 - failed to open /dev/dvb/adapter0/dvr0
2014-07-03 03:31:55.926 [  ERROR] linuxdvb: Sundtek DVB-C (III) : DVB-C #0 - failed to open dmx for pid 0 [e=No such device or address]
2014-07-03 03:31:55.932 [  ERROR] linuxdvb: Sundtek DVB-C (III) : DVB-C #0 - failed to open dmx for pid 1 [e=No such device or address]


When trying to scan witg dvr0:
:~$ sudo /opt/bin/mediaclient --cat /dev/dvb/adapter0/dvr0 | /opt/bin/mediaclient --pipecount=1000
[2014-07-03 03:34:19]          0 bytes |       0.00 kb |       0.00 mb transferred
[2014-07-03 03:34:20]          0 bytes |       0.00 kb |       0.00 mb transferred
[2014-07-03 03:34:21]          0 bytes |       0.00 kb |       0.00 mb transferred
[2014-07-03 03:34:22]          0 bytes |       0.00 kb |       0.00 mb transferred
^C

:~$ sudo /opt/bin/mediaclient -e
Driver is currently not running, please start it as root
mediaclient --start
:~$


Have tested with
$ /opt/bin/mediaclient --build
Build date: 2014-07-01 14:36:39

$ /opt/bin/mediaclient --build
Build date: 2014-04-23 13:43:23