Sundtek Support Forum

Deutsch => VU+ - VU+ Duo und VU+ Solo Settopbox => Thema gestartet von: Sundtek am Dezember 01, 2010, 03:20:18 Nachmittag

Titel: VU+ Solo Support
Beitrag von: Sundtek am Dezember 01, 2010, 03:20:18 Nachmittag
VU+ Solo wird seit 1. Dezember ebenfalls unterstützt.

Zitat

/sundtek_installer_101201.sh

Welcome to the Sundtek linux driver setup

Legal notice:
This software comes without any warranty, use it at your own risk

Do you want to continue [Y/N]:
Nutzungsbedingungen:
Sundtek übernimmt keinerlei Haftung für Schäden welche eventuell durch
das System oder die angebotenen Dateien entstehen können.

Wollen Sie fortfahren [J/N]:
y
unpacking...
checking system... VU+ Solo detected
installing...
Starting driver...
switching off loglevel
done.

Vielen Dank an unsere Supporter und VU+ welche dies getestet haben.

-> Installationsanleitung (http://support.sundtek.com/index.php/topic,337.0.html)
Titel: Re:VU+ Solo Support
Beitrag von: irishchris am Dezember 22, 2010, 01:09:32 Nachmittag
hi

my question is if you have the sundtek media pro tv tuner in a vu+ duo - is it possible to stream over network to a vu+ solo as i see a guide for doing it for pc over network

many thanks
Titel: Re:VU+ Solo Support
Beitrag von: Sundtek am Dezember 22, 2010, 03:34:52 Nachmittag
We will test this in a few days.

Just as information, Sundtek will mostly close until 28th december. Some voluntary support might be given during this time.
Titel: Re:VU+ Solo Support
Beitrag von: irishchris am Januar 25, 2011, 07:46:29 Nachmittag
any more info / instructions on this??
Titel: Re:VU+ Solo Support
Beitrag von: Sundtek am Januar 25, 2011, 11:24:41 Nachmittag
Hi,

we tested this good news is that Network mode works quite well.

First of all set up a server according to our network documentation:
http://support.sundtek.com/index.php/topic,179.0.html

VU+ Setup:

1. connect to your VU+ using telnet and run following commands:
Zitat
cd /tmp
wget http://www.sundtek.de/media/sundtek_installer.sh
chmod 777 sundtek_installer.sh
./sundtek_installer.sh
/opt/bin/mediaclient --scan-network
Scanning network for IPTV media servers
------------------------------------------------------------------------------
 IP address       | ID  |  devicename          | Users | Capabilities | Serial
------------------------------------------------------------------------------
 192.168.1.14     | 0   | Sundtek MediaTV Pro  | 2     | DVB-T, DVB-C | 0110118165610
 192.168.1.13     | 0   | Sundtek MediaTV Pro  | 2     | DVB-T, DVB-C | 0101231110643
-  2 IPTV server found -------------------------------------------------------

echo "REMOTE_IPTV_SERVER=192.168.1.14" > /etc/sundtek.net

cd /usr/script
./DVB_C_netTuner_autostart.sh
./DVB_C_netTuner_starten.sh