Sundtek Support Forum

English => Sundtek MediaTV Pro (Europe) => Drivers => Thema gestartet von: sundlinna am Mai 01, 2019, 01:24:37 Nachmittag

Titel: Drivers
Beitrag von: sundlinna am Mai 01, 2019, 01:24:37 Nachmittag

I have tv-tuner (DVB-T2/C/antenna, cabel). Could you please tell me step by step, how can i get drivers, and also commands to  install for Linux (Ubuntu).
Titel: STB?
Beitrag von: Tryon am Mai 23, 2020, 01:08:38 Vormittag
Some users are obviously confused. I don't see why they can't offer complete product based on CM (
1473005-4 ( could be placed on extended board of current dual tuner.
LAN9514 should be good enough until next CM is ready(predictions say it will support gigabit and dual HDMI out) :-\

Slice ( was ahead of time or 5Ninjas were too few? (also discontinued?)
Titel: IP data receiver?
Beitrag von: Tryon am Mai 31, 2020, 09:52:41 Nachmittag
That can lead to another interesting product?

You can use a wide range of ‘software-defined radios’ (SDR’s) supported by GNURadio to receive the UHF signal
ESA (’s mission control team in Darmstadt are asking for your help to find the fledgling CubeSat.

Titel: Re: Drivers
Beitrag von: Sundtek am September 28, 2020, 11:27:54 Nachmittag
Your messages are a bit confusing, DVB IP can be received with our receiver.
Titel: JCSAT-2B
Beitrag von: Tryon am November 02, 2020, 12:32:35 Vormittag
But complete product based on CM4 could simplify things.
IP Tuners and/or a separate Linux box running TV Headend also means your Kodi CoreElec box etc. doesn’t need to be physically near your antenna/aerial or LNB ( feeds (only the IP tuners or TV Headend server need to be physically connected)

Pretty obvious, similar box could be a little cheaper and better(since on Japanese site is listed obsolete CMR-5975)
The S300D is a low cost, compact and robust data receiver that receives a DVB-S or DVB-S2 satellite signal and passes the IP data onto your LAN. It is perfectly suited for consumer or small-medium enterprise use, delivering IP-based applications...
USD 599.00