Sundtek Support Forum
Deutsch => Sundtek MediaTV Pro => Thema gestartet von: Thomas_397 am April 24, 2014, 10:53:22 Nachmittag
-
Hallo,
ich habe heut meinen Sundtek MediaTV Pro III erhalten und in einem USB 2.0 Anschluss in Betrieb nehmen wollen.
Der TV Stick wird im Info Center erkannt, nur leider nicht im TVheadend.
Ich habe die Synology NAS Package Source zur Installation verwendet
siehe http://support.sundtek.com/index.php/topic,1573.0.html
Vielen Dank und Gruß
Thomas_397
---------------------------
Status des Sundtek Pakets ist: läuft
Version: 0.5
Angaben zum NAS:
Synology Rackstation RS 2414RP+
DSM- Version: DSM 5.0-4482
tvheadend Version: 3.4.27-6
-
Was zeigen denn folgende Befehle an wenn du dich mit Telnet verbindest
ls /var/packages/tvheadend/scripts/start-stop-status
/volume1/@appstore/sundtek/opt/bin/mediaclient -e
ggf. kannst du uns auch via Skype-Chat (sundtek) oder Chat ( http://chat.sundtek.de ) erreichen, ersteres ist bevorzugt.
Das einzige was man bei der Installation beachten muss ist dass das Treiberpaket nach TVHeadend installiert wird. Eigentlich sollte es hierbei keine weiteren Probleme geben können.
-
Hallo,
vielen Dank für die schnelle Antwort.
Das Problem könnte daran liegen, das ich zuerst den Treiber installiert hatte und erst dann tvheadend.
Ich hatte mich an die folgende Anleitung gehalten :
http://www.itfragen.ch/2013/06/30/synology-mit-dvb-c-live-tv-und-recorder-fur-kabelfernsehen-tvheadend/
RackStation> **** List of Media Hardware Devices ****
-ash: ****: not found
RackStation> device 0: [MediaTV Pro III USB (EU)] DVB-C, DVB-T, DVB-T2, ANALOG-
TV, FM-RADIO, REMOTE-CONTROL, OSS-AUDIO, RDS
-ash: syntax error: unexpected "("
RackStation> [BUS]:
-ash: [BUS]:: not found
RackStation> ID: 2-3
-ash: ID:: not found
RackStation> [SERIAL]:
-ash: [SERIAL]:: not found
RackStation> ID: U140415230407
-ash: ID:: not found
RackStation> [DVB-C]:
-ash: [DVB-C]:: not found
RackStation> FRONTEND: /dev/dvb/adapter0/frontend0
-ash: FRONTEND:: not found
RackStation> DVR: /dev/dvb/adapter0/dvr0
-ash: DVR:: not found
RackStation> DMX: /dev/dvb/adapter0/demux0
-ash: DMX:: not found
RackStation> [DVB-T]:
-ash: [DVB-T]:: not found
RackStation> FRONTEND: /dev/dvb/adapter0/frontend0
-ash: FRONTEND:: not found
RackStation> DVR: /dev/dvb/adapter0/dvr0
-ash: DVR:: not found
VIDEO0: /dev/vRackStation> DMX: /dev/dvb/adapter0/demux0
-ash: DMX:: not found
RackStation> [DVB-T2]:
-ash: [DVB-T2]:: not found
RackStation> FRONTEND: /dev/dvb/adapter0/frontend0
-ash: FRONTEND:: not found
RackStation> DVR: /dev/dvb/adapter0/dvr0
-ash: DVR:: not found
RackStation> DMX: /dev/dvb/adapter0/demux0
-ash: DMX:: not found
RackStation> [ANALOG-TV]:
-ash: [ANALOG-TV]:: not found
RackStation> VIDEO0: /dev/video0
-ash: VIDEO0:: not found
RackStation> VBI0: /dev/vbi0
-ash: VBI0:: not found
RackStation> [FM-RADIO]:
-ash: [FM-RADIO]:: not found
RackStation> RADIO0: /dev/radio0
-ash: RADIO0:: not found
RackStation> RDS: /dev/rds0
-ash: RDS:: not found
RackStation> [REMOTECONTROL]:
-ash: [REMOTECONTROL]:: not found
RackStation> INPUT0: /dev/mediainput0
-ash: INPUT0:: not found
RackStation> [OSS]:
-ash: [OSS]:: not found
RackStation> OSS0: /dev/dsp0
-ash: OSS0:: not found
-
Dann einfach den Treiber neu deinstallieren + installieren und es sollte funktionieren.
-
Hallo,
nach entfernen des alten Treibers/Pakets, werden mir keine Community Pakete mehr angezeigt.
Es wird rechts angezeigt das alle Pakete installiert sind.
Ich habe die Quellen gelöscht, um diese erneut anzulegen.
Nur bekomme ich die Meldung unbekannter Speicherort und eine Speicherung der Quelle ist nicht mehr möglich.
Was ist zu tun?
-
Kontaktieren Sie uns via Skype-Chat (sundtek) oder Web-Chat ( http://chat.sundtek.de ) damit wir uns das direkt ansehen können.
Das Ganze wurde bei uns auf verschiedenen Synology NAS Systemen getestet und funktioniert eigentlich problemlos, es ist uns auch unklar wie es überhaupt noch zu Problemen kommen kann.
Nur zur Information, der Treiber oder gar installer löscht nichts auf dem NAS also kann hier nichts passieren
-
Synology hat (wie du erwähnt hast) gestern ein Update herausgebracht welches nicht mehr kompatibel ist mit dem aktuellen Synocommunity Repository, die Synocommunity muss erst den Server erst aktualisieren damit es wieder klappt (wir hatten das gleiche Problem)..
Bin mir sicher das die Synocommunity das Problem recht schnell beheben wird.
Das ist der Grund warum Du "Unbekannter Speicherort" bekommst bzw. bekommen hast.
Alte Paketanfrage:
- - [25/Apr/2014:09:00:05 +0000] "POST /synology HTTP/1.1" 301 542 "-" "\"Mozilla/4.0 (compatible; MSIE 6.1; Windows XP)\""
- - [25/Apr/2014:09:00:06 +0000] "GET /synology/ HTTP/1.1" 200 11348 "-" "\"Mozilla/4.0 (compatible; MSIE 6.1; Windows XP)\""
Neue Paketanfrage:
- - [25/Apr/2014:08:58:48 +0000] "POST /synology HTTP/1.1" 301 542 "-" "\"Mozilla/4.0 (compatible; MSIE 6.1; Windows XP) Synology\""
- - [25/Apr/2014:08:58:48 +0000] "GET /synology/ HTTP/1.1" 200 433 "-" "\"Mozilla/4.0 (compatible; MSIE 6.1; Windows XP) Synology\""
Nach der Remote Session klappt ja jetzt alles.