Sundtek Support Forum

English => Dreambox Settopbox => Thema gestartet von: Magog am Juni 13, 2026, 10:25:02 Vormittag

Titel: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
Beitrag von: Magog am Juni 13, 2026, 10:25:02 Vormittag

Hello, now that OpenATV is wortking really great with the TWO... i have a problem that didn´t matter before because it was unusable.
After every system restart driver won´t load and i must go to Sundtek control center, press Blue (say no to reinstall driver) and then restart Enigma2.
It works ok after that.
 
Thanks.

Titel: Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
Beitrag von: Magog am Juni 13, 2026, 10:51:35 Vormittag

After reboot:

root@dreamtwo:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [MediaTV Digital Home III (EU)]  DVB-C, DVB-T, DVB-T2
  [INFO]:
     STATUS: STANDBY
  [BUS]:
     ID: 1-2
  [SERIAL]:
     ID: U211006190056
  [DVB-C,DVB-T,DVB-T2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0

root@dreamtwo:~# cat /proc/bus/nim_sockets
NIM Socket 0:
        Input_Name: A1
        Type: DVB-S2
        Name: Si2166D
        Has_Outputs: no
        Frontend_Device: 0
        I2C_Device: 2
NIM Socket 1:
        Input_Name: A2
        Type: DVB-S2
        Name: Si2166D
        Has_Outputs: no
        Frontend_Device: 1
        I2C_Device: 2
NIM Socket 2:
        Type: DVB-T2
        Name: Sundtek DVB-T2 (III) (1/0) (USB
        Has_Outputs: no
        Frontend_Device: 2
root@dreamtwo:~#

After Control center action:
root@dreamtwo:~# /opt/bin/mediaclient -e
**** List of Media Hardware Devices ****
device 0: [MediaTV Digital Home III (EU)]  DVB-C, DVB-T, DVB-T2
  [INFO]:
     STATUS: ACTIVE
  [BUS]:
     ID: 1-2
  [SERIAL]:
     ID: U211006190056
  [DVB-C,DVB-T,DVB-T2]:
     FRONTEND: /dev/dvb/adapter1/frontend0
     DVR: /dev/dvb/adapter1/dvr0
     DMX: /dev/dvb/adapter1/demux0

root@dreamtwo:~# cat /proc/bus/nim_sockets
NIM Socket 0:
        Input_Name: A1
        Type: DVB-S2
        Name: Si2166D
        Has_Outputs: no
        Frontend_Device: 0
        I2C_Device: 2
NIM Socket 1:
        Input_Name: A2
        Type: DVB-S2
        Name: Si2166D
        Has_Outputs: no
        Frontend_Device: 1
        I2C_Device: 2
NIM Socket 2:
        Type: DVB-T2
        Name: Sundtek DVB-T2 (III) (1/0) (USB
        Has_Outputs: no
        Frontend_Device: 2
root@dreamtwo:~#

So the tunner starts but standby, don´t now if it can be fixed...

Thanks.

Titel: Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
Beitrag von: Magog am Juni 13, 2026, 11:38:30 Vormittag

Upps , sorry ... even a simple interface reboot takes out the tunner from standby.

Titel: Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
Beitrag von: Sundtek am Juni 13, 2026, 03:18:22 Nachmittag

Hi,

Did you enable autostart?

The standby is normal if the tuner is idle it will go into standby.

Titel: Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
Beitrag von: Magog am Juni 13, 2026, 10:23:13 Nachmittag

Sure.

Autostart - yes.

It starts ok with Dreamos.

Thanks.

Titel: Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
Beitrag von: Sundtek am Juni 14, 2026, 03:00:35 Vormittag

So your problem is fixed?

Titel: Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
Beitrag von: Magog am Juni 14, 2026, 11:12:54 Vormittag

Hello, no... i´m saying that it starts ok under the original OS of the machine (opendreambox 2.6) but under OpeanATV it starts in standby mode... running multiboot.

Thanks.

Titel: Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
Beitrag von: Sundtek am Juni 14, 2026, 11:39:45 Vormittag

Ok that is no problem it's just the behavior of Enigma2. The tuner will leave standby once Enigma2 opens the device. Everything absolutely normal.

Anyway thanks for the feedback :-) We just reworked DVB-T2 support for the Dreambox 2.

Titel: Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
Beitrag von: Magog am Juni 14, 2026, 12:08:44 Nachmittag

But that is the problem... it doesn´t leave standby mode.
If i change to a DTT channel... nothing. A simple GUI restart and it runs ok.

Thanks.

Titel: Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
Beitrag von: Sundtek am Juni 14, 2026, 01:55:58 Nachmittag

This is not a problem of the driver itself, maybe the startup routine has changed in OpenATV 8 and enigma2 starts earlier than the driver.

Standby itself is not the problem.

Can you provide remote access to the settopbox so I can check? Eg. via RustDesk?
We have a support chat too:
https://discord.gg/AR5QJhyNnw

Titel: Re: Dreambox TWO, sundtek media tv pro iii driver don´t start in OpenATV 8
Beitrag von: Magog am Juni 15, 2026, 01:02:14 Nachmittag

Sure, i'll contact when i have enought time for you to test...
I hope this evening.

Thanks.