Sundtek Support Forum
Mitsubishi Meldas CNC => General => Thema gestartet von: Sundtek am April 15, 2026, 05:56:21 Nachmittag
-
We’re currently putting the final touches on our Mitsubishi M65 Ethernet Bridge, designed for Raspberry Pi, PC, and similar systems.
The bridge provides full support for MDS-B-SVJ2 servo drives as well as the original Mitsubishi I/O boards, enabling seamless integration of 25-year-old Meldas M6x control systems into LinuxCNC.
While the original hardware is still very capable—especially the servo drives—the spindle performance (typically around 8000 RPM) can benefit significantly from modern control. With LinuxCNC, you gain improved motion planning and look-ahead, resulting in noticeably better overall machine performance.
Also the system won't require a battery any more, and it's not required to set up any options anymore since LinuxCNC is fully open.
All that has to be connected to our ethernet adapter - F010-CF10 -- One cable that rules it all
Discord Chat: https://discord.gg/AR5QJhyNnw
(https://sundtek.com/images/sundtekm65small.jpg) (https://sundtek.com/images/sundtekm65.svg)
We’ll be sharing more details, technical insights, and availability information over the coming weeks.
The adapter is designed in Taiwan and manufactured in Austria and Taiwan, support is available in German, English and Chinese.