Sundtek Support Forum

English => {Single, Dual, Quad} Sundtek SkyTV Ultimate => Thema gestartet von: satpi am Dezember 31, 2018, 03:36:36 Nachmittag

Titel: MPE data support
Beitrag von: satpi am Dezember 31, 2018, 03:36:36 Nachmittag

Good Day

We are considering using the SkyTV Ultimate 8 DVB-S2 in a project, but before we buy a test unit, we have a question.

I would like to know if the SkyTV Ultimate 8 supports MPE data filtering in a Transport Stream in Linux? In other words, does the driver module create a /dev/dvb/adapter0/net0?

If so, we could then create the virtual network interface using dvbnet filter (from the Linux dvb-apps package) and process the MPE data. The MPE data is IP multicast streams. Done this many times with other DVB-S2 receivers, but have never tried the Sundtek before and I am not sure if data reception was built into the Linux driver?

Thank you.

Titel: Re: MPE data support
Beitrag von: Sundtek am Dezember 31, 2018, 07:07:03 Nachmittag

Hi,

due to lack of interest we have not implemented the net devices yet.

Although it would be possible in February 2019, after releasing our 4x USB tuners.

Titel: Re: MPE data support
Beitrag von: satipses am Mai 07, 2019, 10:19:39 Vormittag

Dear Sundtek Team,

As previously requested, it would be very nice if you could provide a "driver" that would "create" a /dev/dvb/adapter0/net0 node.

Thank you & kind regards.

Titel: Re: MPE data support
Beitrag von: satpi am Juli 25, 2024, 11:40:45 Vormittag

Hi

I just want to revisit this. Is /dev/dvb/adapter0/net0 supported yet (as per the original question in 2018)?

Thank you.