Sundtek Support Forum
Deutsch => VU+ - VU+ Duo und VU+ Solo Settopbox => Thema gestartet von: donald am Januar 15, 2012, 12:53:58 Nachmittag
-
how to set the sundtek cable tuner in my vu duo
and set upc in the tuner.
open pli 2.1
***** 2.03
kernel 3.1.1
engima jan-13-2012
grt
don.
-
Did you follow the installation instruction:
http://support.sundtek.com/index.php/topic,348.0.html
By the way we will move this post to the english section after a few days.
-
i have read that, but you must do that when the sundtek is connected?
and is this (the latest) driver for vu duo with pli?
thanks,
don
-
The device should be connected, but it's not mandatory (for the initial setup)
The latest driver is for all systems yes.
-
i have now the sundtek put in the front of the vu duo
and the latest driver is in the vu duo
i dont see a light on the stick.
i reboot the vu , see now the tuner c is activated
what is the next step?
-
You need to manually scan for a transponder and enable the network scan.
The LED is only active when the Stick is active. In Standby Mode there is no active LED.