Deutsch > Wünsche und Anregungen

[et9000] usbkhelper.ko

<< < (2/3) > >>

twel12:
What is working on dvb-c:

- SDTV channels, video and audio ok (lipsync ok on HDMI output). Zap times almost as fast as with the buildin tuners.

- PIP with SDTV channels ok (dvb-s and dvb-c mix), sometimes HD channel on main and SD in PIP works. HDTV on main and HDTV in PIP doesn't work. This is a problem with the ET-9000 drivers (or hardware). Notice: the ET-9000 has two decoders, so full PIP shouldn't be a problem.
 
What doesn't work:

- HDTV channels, video is ok but audio stutters.

Streaming HDTV DVB-C to pc is perfect (no audio problem).
When I record an HD channel the audio is ok at playback!

I signed up with http://www.clarke-support.com/Forum/.
I asked the developers over there to look at the vtuner implementation.

Look in this tread: http://www.clarke-support.com/Forum/showthread.php?523-ET-9000-is-now-officially-supported-by-Sundtek-(DVB-C-T) (probebly you have to create an account to view this tread).

Someone called bla666 claimes that everything's running smooth with a "small patch" (with Sundtek DVB-S2 tuners). I am currious about this patch but did not get an answer yet.

Sundtek:
Sounds good.

Maybe you can try:

--- Zitat ---/opt/bin/mediaclient --avoffset=1000

--- Ende Zitat ---

this should increase the decoder buffer (if that feature is available on the CT)

we'll sign up a little bit later and read what's going on.

twel12:

--- Code: ---root@et9000:~# /opt/bin/mediaclient --avoffset=1000
A/V offset: 00015f90 (90kTS) / 1000 ms
unable to open /proc/stb/audio/pts_offset
unable to open /proc/stb/vmpeg/0/pts_offset
root@et9000:~#

root@et9000:/proc/stb/audio# ls -al
dr-xr-xr-x    2 root     root            0 Feb 22 00:43 .
dr-xr-xr-x   15 root     root            0 Feb 22 00:42 ..
-r--r--r--    1 root     root            0 Feb 22 00:43 ac3
-r--r--r--    1 root     root            0 Feb 22 00:43 ac3_choices
-r--r--r--    1 root     root            0 Feb 22 00:43 audio_delay_bitstream
-r--r--r--    1 root     root            0 Feb 22 00:43 audio_delay_pcm
-r--r--r--    1 root     root            0 Feb 22 00:43 j1_mute

root@et9000:/proc/stb/vmpeg/0# ls -al
dr-xr-xr-x    2 root     root            0 Feb 22 00:44 .
dr-xr-xr-x    4 root     root            0 Feb 22 00:44 ..
-r--r--r--    1 root     root            0 Feb 22 00:46 aspect
-r--r--r--    1 root     root            0 Feb 22 00:46 dst_height
-r--r--r--    1 root     root            0 Feb 22 00:46 dst_left
-r--r--r--    1 root     root            0 Feb 22 00:46 dst_top
-r--r--r--    1 root     root            0 Feb 22 00:46 dst_width
-r--r--r--    1 root     root            0 Feb 22 00:46 framerate
-r--r--r--    1 root     root            0 Feb 22 00:46 progressive
-r--r--r--    1 root     root            0 Feb 22 00:46 progressive_override
-r--r--r--    1 root     root            0 Feb 22 00:46 progressive_override_choices
-r--r--r--    1 root     root            0 Feb 22 00:46 xres
-r--r--r--    1 root     root            0 Feb 22 00:46 yres
root@et9000:/proc/stb/vmpeg/0#


--- Ende Code ---

Tartan101:
habe ein et9000
treiber installiert dvb-c funktioniert (unitymedia) :D
bei ARDhd & ZDFhd bekomme ich kein Ton weder über HDMI noch über den Lichtleiterausgang? der Ton z.B. von einem dritten Programm ist da
 

Sundtek:
wir können das zwar nicht bestätigen da wir keine ET9000 besitzen aber es sollte irgendwo eine Option "AC3 Downmix" geben.

Navigation

[0] Themen-Index

[#] Nächste Seite

[*] Vorherige Sete