16
Software Entwicklung / Re:2 sundtek sticks an 1 box
« am: April 23, 2017, 01:07:04 Vormittag »
ich habe eben gemerkt, dass das auch schon bei 1 tuner auftritt, wenn ich auf derselben frequenz 2 sender gleichzeitig sehen will im p-i-p. in diesem fall war es der media pro3 mit 2 dvb-t2 sendern. 1 lief, beim 2. sender war standbild.
hier ist das komplette log dazu:
1970-01-01 01:00:27 [1468] Starting up Multimedia Framework (Mar 27 2017 09:52:55)
1970-01-01 01:00:27 [1469] Starting service processor (PID 1469)
1970-01-01 01:00:27 [1468] API Version: 5.10
1970-01-01 01:00:27 [1468] Running on Linux (4.1.37)
1970-01-01 01:00:27 [1468] scanning devices
1970-01-01 01:00:27 [1468] scanning for drivers
1970-01-01 01:00:27 [1468] scanning for plugins
1970-01-01 01:00:27 [1468] Starting up device manager
1970-01-01 01:00:27 [1468] Setting permission of /dev/dvb to 777
1970-01-01 01:00:27 [1468] This is to avoid problems if TV Applications are started as another user
1970-01-01 01:00:27 [1468] as seen on eg. Synology NAS Systems where tvheadend is unable to read
1970-01-01 01:00:27 [1468] /dev/dvb and because of that would not detect the TV tuner
1970-01-01 01:00:27 [1468] scanning devices done
1970-01-01 01:00:27 [1468] attached devices:
1970-01-01 01:00:27 [1469] Autostarting scripts in /etc/sundtek/
1970-01-01 01:00:27 [1469] executed all available items
1970-01-01 01:00:27 [1468] registering ID: 0
1970-01-01 01:00:27 [1468] Using dynamic configuration
1970-01-01 01:00:27 [1468] DTV1 Transfer is set to: Bulk
1970-01-01 01:00:28 [1468] Initial mode request: DVBT
1970-01-01 01:00:28 [1468] Allocation using pg for type 65678
1970-01-01 01:00:28 [1468] Allocated Shared memory buffer: 0xb3e6a000
1970-01-01 01:00:29 [1468] attaching DVB-T, DVB-C, DVB-T2
1970-01-01 01:00:29 [1468] demodulator successfully attached (DVB-T)!
1970-01-01 01:00:29 [1468] This device uses the third generation Tuner
1970-01-01 01:00:29 [1468] Power up demodulator
1970-01-01 01:00:31 [1468] Allocated Shared memory buffer: 0xb3e04000
1970-01-01 01:00:31 [1468] Allocated Shared memory buffer: 0xb37ab000
1970-01-01 01:00:31 [1468] Allocation using pg for type 16
1970-01-01 01:00:31 [1468] Allocated Shared memory buffer: 0xb36c5000
1970-01-01 01:00:31 [1468] SETTING PAL/SECAM
1970-01-01 01:00:31 [1468] SETTING PAL/SECAM
1970-01-01 01:00:31 [1468] attaching video decoder
1970-01-01 01:00:31 [1468] SETTING PAL/SECAM
1970-01-01 01:00:31 [1468] Setting frequency: 245250000
1970-01-01 01:00:31 [1468] Setting analogTV Parameters
1970-01-01 01:00:31 [1468] Setting PAL-B
1970-01-01 01:00:31 [1468] attaching radio module
2017-04-23 00:52:33 [1468] requesting to tune to frequency: 87900000 4
2017-04-23 00:52:33 [1468] Setting Radio Volume: 219
2017-04-23 00:52:33 [1468] Configure urbs for bulk
2017-04-23 00:52:33 [1468] Registering OSS emulation
2017-04-23 00:52:33 [1468] registering: adapter1/0
2017-04-23 00:52:33 [1468] registered virtual: /dev/dvb/adapter1/frontend0
2017-04-23 00:52:33 [1468] registered virtual: /dev/dvb/adapter1/demux0
2017-04-23 00:52:33 [1468] registered virtual: /dev/dvb/adapter1/dvr0
2017-04-23 00:52:33 [1468] registered virtual: /dev/dsp0
2017-04-23 00:52:33 [1468] registered virtual: /dev/video0
2017-04-23 00:52:33 [1468] registered virtual: /dev/vbi0
2017-04-23 00:52:33 [1468] registered virtual: /dev/radio0
2017-04-23 00:52:33 [1468] registered virtual: /dev/rds0
2017-04-23 00:52:33 [1468] Disabling USB remote control since nim_sockets are available
2017-04-23 00:52:33 [1468] Initialized MediaTV Pro III (EU)
2017-04-23 00:52:33 [1468] Driver loaded within 5239 milliseconds
2017-04-23 00:52:33 [1468] Enabling Dreambox Support for first Adapter (/dev/dvb/adapter1/frontend0)
2017-04-23 00:52:33 [1468] registering ID: 1
2017-04-23 00:52:33 [1468] Supporting DVB-S/S2 API for Dreambox
2017-04-23 00:52:33 [1468] starting up dreambox /dev/dvb/adapter1/frontend0
2017-04-23 00:52:33 [1468] disconnecting kernel driver
2017-04-23 00:52:33 [1468] mute fm radio
2017-04-23 00:52:33 [1468] Switching to Digital TV
2017-04-23 00:52:34 [1468] Power up demodulator
2017-04-23 00:52:34 [1468] attaching second generation DVB-S/S2 demodulator
2017-04-23 00:52:35 [1468] SETTING DVB-T
2017-04-23 00:52:35 [1468] Using local device
2017-04-23 00:52:35 [1468] Disabling HW PID filter for this settopbox (dmhwpidfilter=off)
2017-04-23 00:52:35 [1468] in /etc/sundtek.conf
2017-04-23 00:52:35 [1468] Device is currently in DVB-T mode
2017-04-23 00:52:35 [1468] VTUNER_SET_NAME: MediaTV Pro III (EU)
2017-04-23 00:52:36 [1468] Aliasing /dev/dvb/adapter0/frontend2 to directly access the driver
2017-04-23 00:52:37 [1468] demodulator successfully attached (DVB_S/S2)!
2017-04-23 00:52:37 [1468] Allocation using pg for type 65678
2017-04-23 00:52:37 [1468] Allocated Shared memory buffer: 0xb222e000
2017-04-23 00:52:37 [1468] requesting to attach tuner(s) now
2017-04-23 00:52:37 [1468] registering: adapter2/0
2017-04-23 00:52:37 [1468] registered virtual: /dev/dvb/adapter2/frontend0
2017-04-23 00:52:37 [1468] registered virtual: /dev/dvb/adapter2/demux0
2017-04-23 00:52:37 [1468] registered virtual: /dev/dvb/adapter2/dvr0
2017-04-23 00:52:37 [1468] Setting RC Protocol to NEC
2017-04-23 00:52:37 [1468] registered virtual: /dev/mediainput0
2017-04-23 00:52:37 [1468] Remote Control Layout: 0
2017-04-23 00:52:37 [1468] Using flat remote control layout
2017-04-23 00:52:37 [1468] IR Setup
2017-04-23 00:52:37 [1468] Infrared Control Support is disabled in configuration file
2017-04-23 00:52:37 [1468]
2017-04-23 00:52:37 [1468] Sundtek MediaTV Driver loaded. This driver is licensed for non-commercial use
2017-04-23 00:52:37 [1468] with Sundtek MediaTV only
2017-04-23 00:52:37 [1468] Driver loaded within 4076 milliseconds
2017-04-23 00:52:37 [1468] Serial(1): U120411145501
2017-04-23 00:52:37 [1468] Enabling Dreambox Support for first Adapter (/dev/dvb/adapter2/frontend0)
2017-04-23 00:52:37 [1468] Supporting DVB-S/S2 API for Dreambox
2017-04-23 00:52:37 [1468] starting up dreambox /dev/dvb/adapter2/frontend0
2017-04-23 00:52:37 [1468] Initial devicescan done, switching detection mode
2017-04-23 00:52:37 [1468] Using local device
2017-04-23 00:52:37 [1468] Disabling HW PID filter for this settopbox (dmhwpidfilter=off)
2017-04-23 00:52:37 [1468] in /etc/sundtek.conf
2017-04-23 00:52:37 [1468] Device is currently in DVB-S2 mode
2017-04-23 00:52:37 [1468] VTUNER_SET_NAME: Sundtek SkyTV Ultimate III (USB 2.0)
2017-04-23 00:52:38 [1468] Aliasing /dev/dvb/adapter0/frontend3 to directly access the driver
2017-04-23 00:52:38 [1468] FE SET VOLTAGE
2017-04-23 00:52:38 [1468] MSG_SET_VOLTAGE: -1
2017-04-23 00:52:39 [1459] Using /etc/sundtek.conf for deviceconfiguration
hier ist das komplette log dazu:
1970-01-01 01:00:27 [1468] Starting up Multimedia Framework (Mar 27 2017 09:52:55)
1970-01-01 01:00:27 [1469] Starting service processor (PID 1469)
1970-01-01 01:00:27 [1468] API Version: 5.10
1970-01-01 01:00:27 [1468] Running on Linux (4.1.37)
1970-01-01 01:00:27 [1468] scanning devices
1970-01-01 01:00:27 [1468] scanning for drivers
1970-01-01 01:00:27 [1468] scanning for plugins
1970-01-01 01:00:27 [1468] Starting up device manager
1970-01-01 01:00:27 [1468] Setting permission of /dev/dvb to 777
1970-01-01 01:00:27 [1468] This is to avoid problems if TV Applications are started as another user
1970-01-01 01:00:27 [1468] as seen on eg. Synology NAS Systems where tvheadend is unable to read
1970-01-01 01:00:27 [1468] /dev/dvb and because of that would not detect the TV tuner
1970-01-01 01:00:27 [1468] scanning devices done
1970-01-01 01:00:27 [1468] attached devices:
1970-01-01 01:00:27 [1469] Autostarting scripts in /etc/sundtek/
1970-01-01 01:00:27 [1469] executed all available items
1970-01-01 01:00:27 [1468] registering ID: 0
1970-01-01 01:00:27 [1468] Using dynamic configuration
1970-01-01 01:00:27 [1468] DTV1 Transfer is set to: Bulk
1970-01-01 01:00:28 [1468] Initial mode request: DVBT
1970-01-01 01:00:28 [1468] Allocation using pg for type 65678
1970-01-01 01:00:28 [1468] Allocated Shared memory buffer: 0xb3e6a000
1970-01-01 01:00:29 [1468] attaching DVB-T, DVB-C, DVB-T2
1970-01-01 01:00:29 [1468] demodulator successfully attached (DVB-T)!
1970-01-01 01:00:29 [1468] This device uses the third generation Tuner
1970-01-01 01:00:29 [1468] Power up demodulator
1970-01-01 01:00:31 [1468] Allocated Shared memory buffer: 0xb3e04000
1970-01-01 01:00:31 [1468] Allocated Shared memory buffer: 0xb37ab000
1970-01-01 01:00:31 [1468] Allocation using pg for type 16
1970-01-01 01:00:31 [1468] Allocated Shared memory buffer: 0xb36c5000
1970-01-01 01:00:31 [1468] SETTING PAL/SECAM
1970-01-01 01:00:31 [1468] SETTING PAL/SECAM
1970-01-01 01:00:31 [1468] attaching video decoder
1970-01-01 01:00:31 [1468] SETTING PAL/SECAM
1970-01-01 01:00:31 [1468] Setting frequency: 245250000
1970-01-01 01:00:31 [1468] Setting analogTV Parameters
1970-01-01 01:00:31 [1468] Setting PAL-B
1970-01-01 01:00:31 [1468] attaching radio module
2017-04-23 00:52:33 [1468] requesting to tune to frequency: 87900000 4
2017-04-23 00:52:33 [1468] Setting Radio Volume: 219
2017-04-23 00:52:33 [1468] Configure urbs for bulk
2017-04-23 00:52:33 [1468] Registering OSS emulation
2017-04-23 00:52:33 [1468] registering: adapter1/0
2017-04-23 00:52:33 [1468] registered virtual: /dev/dvb/adapter1/frontend0
2017-04-23 00:52:33 [1468] registered virtual: /dev/dvb/adapter1/demux0
2017-04-23 00:52:33 [1468] registered virtual: /dev/dvb/adapter1/dvr0
2017-04-23 00:52:33 [1468] registered virtual: /dev/dsp0
2017-04-23 00:52:33 [1468] registered virtual: /dev/video0
2017-04-23 00:52:33 [1468] registered virtual: /dev/vbi0
2017-04-23 00:52:33 [1468] registered virtual: /dev/radio0
2017-04-23 00:52:33 [1468] registered virtual: /dev/rds0
2017-04-23 00:52:33 [1468] Disabling USB remote control since nim_sockets are available
2017-04-23 00:52:33 [1468] Initialized MediaTV Pro III (EU)
2017-04-23 00:52:33 [1468] Driver loaded within 5239 milliseconds
2017-04-23 00:52:33 [1468] Enabling Dreambox Support for first Adapter (/dev/dvb/adapter1/frontend0)
2017-04-23 00:52:33 [1468] registering ID: 1
2017-04-23 00:52:33 [1468] Supporting DVB-S/S2 API for Dreambox
2017-04-23 00:52:33 [1468] starting up dreambox /dev/dvb/adapter1/frontend0
2017-04-23 00:52:33 [1468] disconnecting kernel driver
2017-04-23 00:52:33 [1468] mute fm radio
2017-04-23 00:52:33 [1468] Switching to Digital TV
2017-04-23 00:52:34 [1468] Power up demodulator
2017-04-23 00:52:34 [1468] attaching second generation DVB-S/S2 demodulator
2017-04-23 00:52:35 [1468] SETTING DVB-T
2017-04-23 00:52:35 [1468] Using local device
2017-04-23 00:52:35 [1468] Disabling HW PID filter for this settopbox (dmhwpidfilter=off)
2017-04-23 00:52:35 [1468] in /etc/sundtek.conf
2017-04-23 00:52:35 [1468] Device is currently in DVB-T mode
2017-04-23 00:52:35 [1468] VTUNER_SET_NAME: MediaTV Pro III (EU)
2017-04-23 00:52:36 [1468] Aliasing /dev/dvb/adapter0/frontend2 to directly access the driver
2017-04-23 00:52:37 [1468] demodulator successfully attached (DVB_S/S2)!
2017-04-23 00:52:37 [1468] Allocation using pg for type 65678
2017-04-23 00:52:37 [1468] Allocated Shared memory buffer: 0xb222e000
2017-04-23 00:52:37 [1468] requesting to attach tuner(s) now
2017-04-23 00:52:37 [1468] registering: adapter2/0
2017-04-23 00:52:37 [1468] registered virtual: /dev/dvb/adapter2/frontend0
2017-04-23 00:52:37 [1468] registered virtual: /dev/dvb/adapter2/demux0
2017-04-23 00:52:37 [1468] registered virtual: /dev/dvb/adapter2/dvr0
2017-04-23 00:52:37 [1468] Setting RC Protocol to NEC
2017-04-23 00:52:37 [1468] registered virtual: /dev/mediainput0
2017-04-23 00:52:37 [1468] Remote Control Layout: 0
2017-04-23 00:52:37 [1468] Using flat remote control layout
2017-04-23 00:52:37 [1468] IR Setup
2017-04-23 00:52:37 [1468] Infrared Control Support is disabled in configuration file
2017-04-23 00:52:37 [1468]
2017-04-23 00:52:37 [1468] Sundtek MediaTV Driver loaded. This driver is licensed for non-commercial use
2017-04-23 00:52:37 [1468] with Sundtek MediaTV only
2017-04-23 00:52:37 [1468] Driver loaded within 4076 milliseconds
2017-04-23 00:52:37 [1468] Serial(1): U120411145501
2017-04-23 00:52:37 [1468] Enabling Dreambox Support for first Adapter (/dev/dvb/adapter2/frontend0)
2017-04-23 00:52:37 [1468] Supporting DVB-S/S2 API for Dreambox
2017-04-23 00:52:37 [1468] starting up dreambox /dev/dvb/adapter2/frontend0
2017-04-23 00:52:37 [1468] Initial devicescan done, switching detection mode
2017-04-23 00:52:37 [1468] Using local device
2017-04-23 00:52:37 [1468] Disabling HW PID filter for this settopbox (dmhwpidfilter=off)
2017-04-23 00:52:37 [1468] in /etc/sundtek.conf
2017-04-23 00:52:37 [1468] Device is currently in DVB-S2 mode
2017-04-23 00:52:37 [1468] VTUNER_SET_NAME: Sundtek SkyTV Ultimate III (USB 2.0)
2017-04-23 00:52:38 [1468] Aliasing /dev/dvb/adapter0/frontend3 to directly access the driver
2017-04-23 00:52:38 [1468] FE SET VOLTAGE
2017-04-23 00:52:38 [1468] MSG_SET_VOLTAGE: -1
2017-04-23 00:52:39 [1459] Using /etc/sundtek.conf for deviceconfiguration